Subject: linux-image-2.6.26: copying /proc/*/pagemap leads to resource consumption because of uninitialized struct Package: linux-image-2.6.26-1-amd64 Version: 2.6.26-10 Severity: normal File: linux-image-2.6.26
*** Please type your report below this line *** The VMware support script copies various files from /proc to the report directory. Copying /proc/*/pagemap takes forever and produces a large file, probably filled with garbage. Steps to reproduce: # cp /proc/self/pagemap /tmp/self.pagemap I found a LKML thread regarding the problem: http://lkml.indiana.edu/hypermail/linux/kernel/0807.2/0262.html -- Package-specific info: ** Version: Linux version 2.6.26-1-amd64 (Debian 2.6.26-10) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Sat Nov 8 18:25:23 UTC 2008 ** Command line: root=/dev/sda1 ro quiet ** Not tainted ** Kernel log: [ 4.816513] sd 2:0:0:0: [sdb] 312573616 512-byte hardware sectors (160038 MB) [ 4.823053] sd 2:0:0:0: [sdb] Write Protect is off [ 4.823053] sd 2:0:0:0: [sdb] Mode Sense: 00 56 00 00 [ 4.838462] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.887176] sd 2:0:0:0: [sdb] 312573616 512-byte hardware sectors (160038 MB) [ 4.895176] sd 2:0:0:0: [sdb] Write Protect is off [ 4.895176] sd 2:0:0:0: [sdb] Mode Sense: 00 56 00 00 [ 4.911586] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.911586] sdb: unknown partition table [ 4.943327] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 4.943327] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 4.943327] ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 18 [ 4.943327] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 5.156285] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 5.160267] scsi3 : ata_piix [ 5.160267] scsi4 : ata_piix [ 5.160766] ata3: SATA max UDMA/133 cmd 0x1c68 ctl 0x1c5c bmdma 0x1c30 irq 18 [ 5.160766] ata4: SATA max UDMA/133 cmd 0x1c60 ctl 0x1c58 bmdma 0x1c38 irq 18 [ 5.508787] ata3: SATA link down (SStatus 0 SControl 300) [ 5.836785] ata4: SATA link down (SStatus 0 SControl 300) [ 6.428775] Uniform Multi-Platform E-IDE driver [ 6.428775] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 6.442692] Driver 'sr' needs updating - please use bus_type methods [ 6.452995] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.452999] Uniform CD-ROM driver Revision: 3.20 [ 6.456539] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 6.743231] kjournald starting. Commit interval 5 seconds [ 6.746589] EXT3-fs: mounted filesystem with ordered data mode. [ 8.911118] udevd version 125 started [ 9.236855] input: Power Button (FF) as /class/input/input2 [ 9.249569] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 9.283521] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.307342] ACPI: Power Button (FF) [PWRF] [ 9.307426] input: Power Button (CM) as /class/input/input3 [ 9.373793] ACPI: Power Button (CM) [PWRB] [ 9.413194] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 9.413194] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x1060) [ 9.413194] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.426292] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 9.426292] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 [ 9.494924] input: PC Speaker as /class/input/input4 [ 9.550176] pnp: the driver 'parport_pc' has been registered [ 9.550195] parport_pc 00:0b: reported by Plug and Play ACPI [ 9.550295] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 9.608522] Error: Driver 'pcspkr' is already registered, aborting... [ 9.654145] parport_pc 00:0b: driver attached [ 11.184238] Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k [ 11.992962] EXT3 FS on sda1, internal journal [ 12.637921] loop: module loaded [ 14.699365] NET: Registered protocol family 10 [ 14.699365] lo: Disabled Privacy Extensions [ 14.699365] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.961559] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 15.961564] eth0: 10/100 speed: disabling TSO [ 15.963056] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 18.132703] /dev/vmmon[2734]: Module vmmon: registered with major=10 minor=165 [ 18.132703] /dev/vmmon[2734]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0 [ 18.132703] /dev/vmmon[2734]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0 [ 18.132703] /dev/vmmon[2734]: Module vmmon: initialized [ 18.208149] /dev/vmci[2748]: VMCI: Driver initialized. [ 18.208149] /dev/vmci[2748]: Module vmci: registered with major=10 minor=60 [ 18.208149] /dev/vmci[2748]: Module vmci: initialized [ 18.583719] /dev/vmnet: open called by PID 2791 (vmnet-bridge) [ 18.583719] /dev/vmnet: hub 0 does not exist, allocating memory. [ 18.583719] /dev/vmnet: port on hub 0 successfully opened [ 18.583719] bridge-eth0: up [ 18.583719] bridge-eth0: attached [ 18.747098] /dev/vmnet: open called by PID 2802 (vmnet-dhcpd) [ 18.747098] /dev/vmnet: hub 1 does not exist, allocating memory. [ 18.747098] /dev/vmnet: port on hub 1 successfully opened [ 18.786375] /dev/vmnet: open called by PID 2820 (vmnet-dhcpd) [ 18.786385] /dev/vmnet: hub 8 does not exist, allocating memory. [ 18.786394] /dev/vmnet: port on hub 8 successfully opened [ 18.806529] /dev/vmnet: open called by PID 2825 (vmnet-natd) [ 18.806540] /dev/vmnet: port on hub 8 successfully opened [ 28.884831] /dev/vmmon[3291]: PTSC: initialized at 2400082000 Hz using TSC [ 28.903503] eth0: no IPv6 routers present [ 29.421374] /dev/vmnet: open called by PID 3294 (vmware-vmx) [ 29.421391] device eth0 entered promiscuous mode [ 29.422032] bridge-eth0: enabled promiscuous mode [ 29.422034] /dev/vmnet: port on hub 0 successfully opened [ 31.461814] /dev/vmnet: open called by PID 3299 (vmnet-netifup) [ 31.461814] /dev/vmnet: port on hub 1 successfully opened [ 31.572047] /dev/vmnet: open called by PID 3317 (vmnet-netifup) [ 31.572047] /dev/vmnet: port on hub 8 successfully opened [ 41.526691] device eth0 left promiscuous mode [ 41.526966] bridge-eth0: disabled promiscuous mode [ 41.527413] /dev/vmnet: open called by PID 3294 (vmware-vmx) [ 41.527413] device eth0 entered promiscuous mode [ 41.527413] bridge-eth0: enabled promiscuous mode [ 41.527413] /dev/vmnet: port on hub 0 successfully opened [ 44.676357] vmnet1: no IPv6 routers present [ 46.098211] vmnet8: no IPv6 routers present [ 56.534442] /dev/vmnet: open called by PID 3343 (vmware-vmx) [ 56.534442] /dev/vmnet: port on hub 0 successfully opened [ 83.893364] /dev/vmnet: open called by PID 3343 (vmware-vmx) [ 83.893377] /dev/vmnet: port on hub 0 successfully opened [ 581.089612] process `cp' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead. [ 2425.925727] vmmon: Had to deallocate locked 114530 pages from vm driver ffff81022c988400 [ 2425.928076] vmmon: Had to deallocate AWE 5151 pages from vm driver ffff81022c988400 ** Loaded modules: Module Size Used by vmnet 43332 15 vmci 52904 1 vmmon 72144 7 ipv6 288328 29 loop 19468 0 snd_pcm 81672 0 snd_timer 25744 1 snd_pcm snd 63688 2 snd_pcm,snd_timer parport_pc 31016 0 soundcore 12064 1 snd parport 41776 1 parport_pc snd_page_alloc 13072 1 snd_pcm pcspkr 7040 0 i2c_i801 13596 0 iTCO_wdt 15696 0 i2c_core 27936 1 i2c_i801 container 8320 0 shpchp 34080 0 pci_hotplug 32056 1 shpchp button 11680 0 evdev 14208 0 ext3 124944 1 jbd 51240 1 ext3 mbcache 12804 1 ext3 sr_mod 19652 0 cdrom 37928 1 sr_mod ide_pci_generic 9220 0 [permanent] ide_core 128284 1 ide_pci_generic sg 36448 0 sd_mod 29376 3 ata_piix 22660 0 ata_generic 10116 0 libata 165472 2 ata_piix,ata_generic dock 14112 1 libata arcmsr 25856 2 ehci_hcd 36108 0 scsi_mod 160760 5 sr_mod,sg,sd_mod,libata,arcmsr e1000e 99748 0 uhci_hcd 25760 0 thermal 22688 0 processor 42304 1 thermal fan 9352 0 thermal_sys 17728 3 thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 3200/3210 Chipset DRAM Controller [8086:29f0] (rev 01) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 3200/3210 Chipset Host-Primary PCI Express Bridge [8086:29f1] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=03, sec-latency=0 Memory behind bridge: d8500000-d85fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:06.0 PCI bridge [0604]: Intel Corporation 3210 Chipset Host-Secondary PCI Express Bridge [8086:29f9] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=06, sec-latency=0 Memory behind bridge: d8700000-d87fffff Prefetchable memory behind bridge: 00000000d8000000-00000000d83fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 1820 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 1840 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI]) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1860 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at d8b01000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset+ FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d8400000-d84fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d8600000-d86fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 4: I/O ports at 18a0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI]) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 18c0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at d8b01400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=11, subordinate=11, sec-latency=32 I/O behind bridge: 00004000-00004fff Memory behind bridge: d8800000-d88fffff Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller [8086:2920] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 1c50 [size=8] Region 1: I/O ports at 1c44 [size=4] Region 2: I/O ports at 1c48 [size=8] Region 3: I/O ports at 1c40 [size=4] Region 4: I/O ports at 1c10 [size=16] Region 5: I/O ports at 1c00 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_generic, ata_piix, ide-pci-generic 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 0: Memory at d8b01800 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1100 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at 1c68 [size=8] Region 1: I/O ports at 1c5c [size=4] Region 2: I/O ports at 1c60 [size=8] Region 3: I/O ports at 1c58 [size=4] Region 4: I/O ports at 1c30 [size=16] Region 5: I/O ports at 1c20 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_generic, ata_piix, ide-pci-generic 00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 02) Subsystem: Super Micro Computer Inc Device [15d9:0000] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 5 Region 0: Memory at d8b00000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 01:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=01, secondary=02, subordinate=02, sec-latency=64 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 01:00.1 PIC [0800]: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A [8086:0326] (rev 09) (prog-if 20 [IO(X)-APIC]) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at d8500000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 01:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=01, secondary=03, subordinate=03, sec-latency=64 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 01:00.3 PIC [0800]: Intel Corporation 6700PXH I/OxAPIC Interrupt Controller B [8086:0327] (rev 09) (prog-if 20 [IO(X)-APIC]) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at d8501000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 04:00.0 PCI bridge [0604]: Intel Corporation 80333 Segment-A PCI Express-to-PCI Express Bridge [8086:0370] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=04, secondary=05, subordinate=05, sec-latency=32 Memory behind bridge: d8700000-d87fffff Prefetchable memory behind bridge: 00000000d8000000-00000000d83fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 04:00.2 PCI bridge [0604]: Intel Corporation 80333 Segment-B PCI Express-to-PCI Express Bridge [8086:0372] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=04, secondary=06, subordinate=06, sec-latency=0 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 05:0e.0 RAID bus controller [0104]: Areca Technology Corp. ARC-1210 4-Port PCI-Express to SATA RAID Controller [17d3:1210] Subsystem: Areca Technology Corp. ARC-1210 4-Port PCI-Express to SATA RAID Controller [17d3:1210] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 (32000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at d8700000 (32-bit, non-prefetchable) [size=4K] Region 2: Memory at d8000000 (32-bit, prefetchable) [size=4M] [virtual] Expansion ROM at d8710000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: arcmsr Kernel modules: arcmsr 0d:00.0 Ethernet controller [0200]: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) [8086:108c] (rev 03) Subsystem: Super Micro Computer Inc Device [15d9:108c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1274 Region 0: Memory at d8400000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e 0f:00.0 Ethernet controller [0200]: Intel Corporation 82573L Gigabit Ethernet Controller [8086:109a] Subsystem: Super Micro Computer Inc Device [15d9:109a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at d8600000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 3000 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e 11:04.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Super Micro Computer Inc Device [15d9:d280] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B+ DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 66 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 4000 [size=256] Region 2: Memory at d8800000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at d8820000 [disabled] [size=128K] Capabilities: <access denied> Kernel modules: radeonfb -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-1-amd64 recommends no packages. Versions of packages linux-image-2.6.26-1-amd64 suggests: ii grub 0.97-47 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64: linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
