Your message dated Thu, 16 Oct 2008 15:42:09 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Re: Bug#498205: Fixed
has caused the Debian Bug report #498205,
regarding linux-image-2.6.26-1-686-bigmem: some keys are broken when using a
ttyx console with kernel 2.6.26-1-686-bigmem
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [EMAIL PROTECTED]
immediately.)
--
498205: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=498205
Debian Bug Tracking System
Contact [EMAIL PROTECTED] with problems
--- Begin Message ---
Package: linux-image-2.6.26-1-686-bigmem
Version: 2.6.26-3
Severity: normal
The separate Arrow-keys, Home,End,Page-Down, Page-Up and Insert-key are not
working on a console ttyx or in vim after upgrading and booting Kernel 2.6.26.
There is no Problem when working in an xterm.
The problem does not occur, when booting Kernel 2.6.25-2-686-bigmem.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686-bigmem (Debian 2.6.26-3) ([EMAIL PROTECTED]) (gcc
version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Aug 20
13:43:08 UTC 2008
** Command line:
root=/dev/mapper/vg1-Root ro
** Not tainted
** Kernel log:
[ 6.401925] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.509931] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000161b783]
[ 6.736134] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.768373] Driver 'sd' needs updating - please use bus_type methods
[ 6.768373] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205
MB)
[ 6.768373] sd 0:0:0:0: [sda] Write Protect is off
[ 6.768373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.768373] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.768373] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205
MB)
[ 6.768373] sd 0:0:0:0: [sda] Write Protect is off
[ 6.768373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.768373] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.768373] sda: sda1 sda2
[ 6.772374] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.971085] device-mapper: uevent: version 1.0.3
[ 6.971085] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
[EMAIL PROTECTED]
[ 10.503706] usb-storage: device scan complete
[ 11.274197] scsi 2:0:0:0: Direct-Access OTi CF CARD Reader 2.00
PQ: 0 ANSI: 0 CCS
[ 11.287795] scsi 2:0:0:1: Direct-Access OTi SM CARD Reader 2.00
PQ: 0 ANSI: 0 CCS
[ 11.301544] scsi 2:0:0:2: Direct-Access OTi SD CARD Reader 2.00
PQ: 0 ANSI: 0 CCS
[ 11.316047] scsi 2:0:0:3: Direct-Access OTi MS CARD Reader 2.00
PQ: 0 ANSI: 0 CCS
[ 11.336045] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 11.348045] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 11.367854] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ 11.396018] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 17.502181] PM: Starting manual resume from disk
[ 17.571487] kjournald starting. Commit interval 5 seconds
[ 17.571487] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.331174] udevd version 125 started
[ 20.093884] input: Power Button (FF) as /class/input/input1
[ 20.143633] ACPI: Power Button (FF) [PWRF]
[ 20.143744] input: Power Button (CM) as /class/input/input2
[ 20.199638] ACPI: Power Button (CM) [PWRB]
[ 20.781852] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 20.781913] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 20.979558] usbcore: registered new interface driver usbserial
[ 20.979612] usbserial: USB Serial support registered for generic
[ 20.979669] usbcore: registered new interface driver usbserial_generic
[ 20.979707] usbserial: USB Serial Driver core
[ 20.988648] usbserial: USB Serial support registered for Reiner SCT
Cyberjack USB card reader
[ 20.988648] cyberjack 1-2:1.0: Reiner SCT Cyberjack USB card reader
converter detected
[ 20.988648] usb 1-2: Reiner SCT Cyberjack USB card reader converter now
attached to ttyUSB0
[ 20.988648] usbcore: registered new interface driver cyberjack
[ 20.988648] cyberjack: v1.01 Matthias Bruestle
[ 20.988648] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader
Driver
[ 21.045602] input: PC Speaker as /class/input/input3
[ 21.488989] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 21.489033] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22
(level, low) -> IRQ 22
[ 21.489145] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 21.521388] Error: Driver 'pcspkr' is already registered, aborting...
[ 21.908370] input: ImExPS/2 Generic Explorer Mouse as /class/input/input4
[ 21.948344] parport_pc 00:0a: reported by Plug and Play ACPI
[ 21.948416] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 22.861674] EXT3 FS on dm-1, internal journal
[ 23.683733] rtc: lost 31 interrupts
[ 24.002697] loop: module loaded
[ 24.095418] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual Core Processor
BE-2350 processors (2 cpu cores) (version 2.20.00)
[ 24.095418] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xc
[ 24.095418] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xd
[ 24.095418] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xf
[ 24.095418] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 24.158997] tun: Universal TUN/TAP device driver, 1.6
[ 24.158997] tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]>
[ 27.863690] fuse init (API version 7.9)
[ 27.949197] kjournald starting. Commit interval 5 seconds
[ 27.949197] EXT3 FS on sda1, internal journal
[ 27.949197] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.093198] kjournald starting. Commit interval 5 seconds
[ 28.093198] EXT3 FS on dm-7, internal journal
[ 28.093198] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.164245] kjournald starting. Commit interval 5 seconds
[ 28.164245] EXT3 FS on dm-4, internal journal
[ 28.164245] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.205621] kjournald starting. Commit interval 5 seconds
[ 28.205621] EXT3 FS on dm-5, internal journal
[ 28.205621] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.344642] kjournald starting. Commit interval 5 seconds
[ 28.344642] EXT3 FS on dm-8, internal journal
[ 28.347427] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.407136] kjournald starting. Commit interval 5 seconds
[ 28.407364] EXT3 FS on dm-2, internal journal
[ 28.407425] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.440705] kjournald starting. Commit interval 5 seconds
[ 28.440705] EXT3 FS on dm-3, internal journal
[ 28.440705] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.746852] Adding 499704k swap on /dev/mapper/vg1-swap. Priority:-1
extents:1 across:499704k
[ 29.849059] Bridge firewalling registered
[ 29.849059] br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 29.856383] device eth0 entered promiscuous mode
[ 29.863612] br0: port 1(eth0) entering learning state
[ 34.542878] NET: Registered protocol family 10
[ 34.542878] lo: Disabled Privacy Extensions
[ 40.151147] lp0: using parport0 (interrupt-driven).
[ 40.203736] ppdev: user-space parallel port driver
[ 40.251016] Clocksource tsc unstable (delta = -73676035 ns)
[ 44.120983] warning: `avahi-daemon' uses 32-bit capabilities (legacy support
in use)
[ 45.250413] eth0: no IPv6 routers present
[ 45.534817] br0: topology change detected, propagating
[ 45.534857] br0: port 1(eth0) entering forwarding state
[ 46.124821] br0: no IPv6 routers present
** Loaded modules:
Module Size Used by
ppdev 7236 0
lp 8932 0
video 17168 0
output 3680 1 video
ac 4032 0
battery 7040 0
cpufreq_ondemand 7244 0
cpufreq_stats 4640 0
cpufreq_powersave 2624 0
cpufreq_conservative 6728 0
cpufreq_userspace 4420 1
ipv6 235748 16
bridge 40792 0
fuse 43676 1
tun 9060 0
powernow_k8 12804 1
freq_table 5088 3 cpufreq_ondemand,cpufreq_stats,powernow_k8
loop 13516 0
parport_pc 23396 1
snd_hda_intel 325112 0
psmouse 33104 0
parport 31756 3 ppdev,lp,parport_pc
serio_raw 5508 0
snd_pcm_oss 33568 0
snd_mixer_oss 13088 1 snd_pcm_oss
snd_pcm 63460 2 snd_hda_intel,snd_pcm_oss
snd_timer 18568 1 snd_pcm
pcspkr 3200 0
k8temp 4832 0
cyberjack 8484 0
snd 46372 5
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
usbserial 27240 1 cyberjack
soundcore 7136 1 snd
snd_page_alloc 8648 2 snd_hda_intel,snd_pcm
i2c_nforce2 6400 0
i2c_core 20596 1 i2c_nforce2
button 6832 0
evdev 8768 3
ext3 105992 8
jbd 40212 1 ext3
mbcache 7876 1 ext3
sha256_generic 12128 0
aes_i586 8512 2
aes_generic 30024 1 aes_i586
cbc 4032 1
dm_crypt 11940 1
crypto_blkcipher 16004 3 cbc,dm_crypt
dm_mirror 15872 0
dm_log 9220 1 dm_mirror
dm_snapshot 15108 0
dm_mod 46952 23 dm_crypt,dm_mirror,dm_log,dm_snapshot
sd_mod 22968 3
usb_storage 76576 0
ide_cd_mod 28452 0
cdrom 30944 1 ide_cd_mod
sata_nv 20040 2
ata_generic 5444 0
libata 141280 2 sata_nv,ata_generic
scsi_mod 130124 3 sd_mod,usb_storage,libata
dock 9040 1 libata
ohci1394 26000 0
ieee1394 76600 1 ohci1394
ehci_hcd 29420 0
ohci_hcd 19428 0
ide_pci_generic 4676 0 [permanent]
forcedeth 46384 0
amd74xx 8520 0 [permanent]
ide_core 93460 3 ide_cd_mod,ide_pci_generic,amd74xx
usbcore 119152 6
cyberjack,usbserial,usb_storage,ehci_hcd,ohci_hcd
thermal 15996 0
processor 33536 2 powernow_k8,thermal
fan 4932 0
thermal_sys 11624 4 video,thermal,processor,fan
** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f0] (rev
a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0
[10de:02fa] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR+ <PERR- INTx-
00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1
[10de:02fe] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5
[10de:02f8] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4
[10de:02f9] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev
a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3
[10de:027f] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2
[10de:027e] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:05.0 VGA compatible controller [0300]: nVidia Corporation C51PV [GeForce
6150] [10de:0240] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81cd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nvidiafb
00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270]
(rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev
a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 4: I/O ports at 4c00 [size=64]
Region 5: I/O ports at 4c40 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:0a.2 RAM memory [0500]: nVidia Corporation MCP51 Memory Controller 0
[10de:0272] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller
[10de:026d] (rev a2) (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller
[10de:026e] (rev a2) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1)
(prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at f400 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx
00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller
[10de:0266] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at e000 [size=16]
Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv
00:0f.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller
[10de:0267] (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:81c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at cc00 [size=16]
Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv
00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev
a2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=128
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio
[10de:026c] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81cb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269]
(rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:816a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at c800 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:05.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:808b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fddf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
-- System Information:
Debian Release: Lenny
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686-bigmem (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686-bigmem recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686-bigmem suggests:
ii grub 0.97-46 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686-bigmem/preinst/elilo-initrd-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/create-kimage-link-2.6.26-1-686-bigmem:
true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686-bigmem/preinst/overwriting-modules-2.6.26-1-686-bigmem:
true
linux-image-2.6.26-1-686-bigmem/postinst/depmod-error-initrd-2.6.26-1-686-bigmem:
false
linux-image-2.6.26-1-686-bigmem/prerm/would-invalidate-boot-loader-2.6.26-1-686-bigmem:
true
linux-image-2.6.26-1-686-bigmem/postinst/old-initrd-link-2.6.26-1-686-bigmem:
true
linux-image-2.6.26-1-686-bigmem/postinst/bootloader-error-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/initrd-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/postinst/depmod-error-2.6.26-1-686-bigmem:
false
linux-image-2.6.26-1-686-bigmem/postinst/old-dir-initrd-link-2.6.26-1-686-bigmem:
true
linux-image-2.6.26-1-686-bigmem/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686-bigmem/postinst/bootloader-test-error-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/postinst/old-system-map-link-2.6.26-1-686-bigmem:
true
linux-image-2.6.26-1-686-bigmem/prerm/removing-running-kernel-2.6.26-1-686-bigmem:
true
linux-image-2.6.26-1-686-bigmem/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686-bigmem/preinst/failed-to-move-modules-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/abort-overwrite-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/abort-install-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/lilo-initrd-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/preinst/bootloader-initrd-2.6.26-1-686-bigmem:
true
--- End Message ---
--- Begin Message ---
Version: 2.6.26-7
On Thu, 16 Oct 2008, Gyorgy Jeney wrote:
> The latest kernel update fixes the issue for me.
>
right it is, thus closing.
--
maks
--- End Message ---
