In data lunedì 2008-10-06 19:45:36 +0200, Didier Raboud ha scritto:
> Le mardi 19 août 2008 19:02:56 Stefano Sabatini, vous avez écrit :
> > Package: firmware-iwlwifi
> > Version: 0.12
> > Severity: grave
> > Justification: renders package unusable
> >
> >
> > I got this when I try to load iwl3945:
> >
> > When I try the command:
> > modprobe iwl3945
> >
> > it hangs for half a minute, then I get this error:
> >
> > iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
> > iwl3945: iwlwifi-3945-1.ucode firmware file req failed: Reason -2
> > iwl3945: Could not read microcode: -2
> > ACPI: PCI interrupt for device 0000:10:00.0 disabled
> > iwl3945: probe of 0000:10:00.0 failed with error -2
> >
> > I'm using firmware-iwlwifi 0.12, with a linux-2.6.24 i686 debian
> > custom kernel.
> >
> > Regards.
>
> Hi,
>
> a new firmware-iwlwifi package is available in unstable. Please try this new
> package and update your linux-image to get the latest iwlwifi driver and
> report back if the problem is still alive.
>
> N.B. I don't get any error with the firmware...
>
> Regards,
Updated to iwlwifi-firmware 0.13.
[EMAIL PROTECTED] ~> uname -a
Linux geppetto 2.6.26-1-686 #1 SMP Thu Oct 9 15:18:09 UTC 2008 i686 GNU/Linux
[EMAIL PROTECTED] ~> sudo modprobe -r iwl3945
[EMAIL PROTECTED] ~> sudo modprobe iwl3945
with dmesg I get:
[ 332.178973] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection
driver for Linux, 1.2.26ks
[ 332.178973] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 332.178973] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 332.178973] PCI: Setting latency timer of device 0000:10:00.0 to 64
[ 332.178973] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 332.218972] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 332.218972] phy0: Selected rate control algorithm 'iwl-3945-rs'
[EMAIL PROTECTED] ~> sudo iwconfig
lo no wireless extensions.
eth1 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11 ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
So the module looks correctly loaded.
[EMAIL PROTECTED] ~> sudo iwlist wlan0 scanning
Here it hangs for 30 seconds more or less, then I get this:
wlan0 Interface doesn't support scanning : Network is down
From dmesg:
[ 372.025418] firmware: requesting iwlwifi-3945-1.ucode
[ 432.097666] iwl3945: iwlwifi-3945-1.ucode firmware file req failed: Reason -2
[ 432.097676] iwl3945: Could not read microcode: -2
[EMAIL PROTECTED] ~> locate iwlwifi-3945-1.ucode
/lib/firmware/iwlwifi-3945-1.ucode
Hints will be highly appreciated.
Regards.
--
"Hello again, Peabody here..."
-- Mister Peabody
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
