I am going to flood the system with more debugging information :-\
Sebastian Niehaus <[EMAIL PROTECTED]> writes: > I am now sure it is *not* a hylafay problem but a kernel problem. When > I booted the box with the 2.6.18 Kernel (Etch) Hylafax worked fine. Since I have two USB controller I tried them both: ,----[ lspci -v ] | | [...] | | | 00:04.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) | Flags: bus master, medium devsel, latency 48, IRQ 19 | I/O ports at ff00 [size=32] | Kernel driver in use: uhci_hcd | Kernel modules: uhci-hcd | | | [...] | | | | 00:0f.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10) | Subsystem: DTK Computer Device 0105 | Flags: bus master, medium devsel, latency 64, IRQ 19 | Memory at f6ef6000 (32-bit, non-prefetchable) [size=4K] | Capabilities: [40] Power Management version 2 | Kernel driver in use: ohci_hcd | Kernel modules: ohci-hcd | | 00:0f.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10) | Subsystem: DTK Computer Device 0105 | Flags: bus master, medium devsel, latency 64, IRQ 16 | Memory at f6ef7000 (32-bit, non-prefetchable) [size=4K] | Capabilities: [40] Power Management version 2 | Kernel driver in use: ohci_hcd | Kernel modules: ohci-hcd | | 00:0f.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20) | Subsystem: DTK Computer Device 0205 | Flags: bus master, medium devsel, latency 128, IRQ 17 | Memory at f6ef2e00 (32-bit, non-prefetchable) [size=256] | Capabilities: [40] Power Management version 2 | Kernel driver in use: ehci_hcd | Kernel modules: ehci-hcd | | | [...] | `---- It does not matter where the modem is plugged in, it keeps crashing. Sebastian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
