Package: linux-image-2.6.26-1-openvz-amd64
Version: 2.6.26-5
Severity: important
On a Dell PowerEdge 1955 (two Quad Core CPUs), the kernel fails on boot
with the regular boot parameters. With the "nosmp" boot option or
"maxcpus=4", the whole thing works fine. With "maxcpus=8" or just no
special command, the kernel fails on boot.
On a second, identical system, I also installed the 2.6.26-1-amd64
kernel but _without_ OpenVZ support. This one is running fine.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-openvz-amd64 (Debian 2.6.26-5) ([EMAIL PROTECTED]) (gcc
version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10
16:30:00 UTC 2008
** Command line:
root=/dev/sda1 ro quiet maxcpus=4
** Not tainted
** Kernel log:
[ 1.348352] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.5 (April
29, 2008)
[ 1.348352] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 1.362299] SCSI subsystem initialized
[ 1.386360] USB Universal Host Controller Interface driver v3.0
[ 1.386360] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) ->
IRQ 21
[ 1.386360] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.386360] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.386360] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 1.386360] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000cce0
[ 1.386360] usb usb1: configuration #1 chosen from 1 choice
[ 1.386360] hub 1-0:1.0: USB hub found
[ 1.386360] hub 1-0:1.0: 2 ports detected
[ 1.386360] Fusion MPT base driver 3.04.06
[ 1.386360] Copyright (c) 1999-2007 LSI Corporation
[ 1.390360] Fusion MPT SAS Host driver 3.04.06
[ 1.489320] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.489325] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.489328] usb usb1: Product: UHCI Host Controller
[ 1.489330] usb usb1: Manufacturer: Linux 2.6.26-1-openvz-amd64 uhci_hcd
[ 1.489332] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.492136] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) ->
IRQ 20
[ 1.492136] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1.492136] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.492136] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 1.492136] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ccc0
[ 1.492136] usb usb2: configuration #1 chosen from 1 choice
[ 1.492136] hub 2-0:1.0: USB hub found
[ 1.492136] hub 2-0:1.0: 2 ports detected
[ 1.595006] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.595010] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.595013] usb usb2: Product: UHCI Host Controller
[ 1.595016] usb usb2: Manufacturer: Linux 2.6.26-1-openvz-amd64 uhci_hcd
[ 1.595019] usb usb2: SerialNumber: 0000:00:1d.1
[ 1.886607] firmware: requesting bnx2-06-4.0.5.fw
[ 1.890482] eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X
64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:19:b9:f5:54:ab
[ 1.892144] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) ->
IRQ 21
[ 1.892144] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 1.892144] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 1.892144] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.892144] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 3
[ 1.896170] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.896170] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 1.896170] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc600000
[ 1.912106] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 1.912151] usb usb3: configuration #1 chosen from 1 choice
[ 1.912151] hub 3-0:1.0: USB hub found
[ 1.912151] hub 3-0:1.0: 4 ports detected
[ 2.016135] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.016135] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.016135] usb usb3: Product: EHCI Host Controller
[ 2.016135] usb usb3: Manufacturer: Linux 2.6.26-1-openvz-amd64 ehci_hcd
[ 2.016135] usb usb3: SerialNumber: 0000:00:1d.7
[ 2.384425] firmware: requesting bnx2-06-4.0.5.fw
[ 2.396386] eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X
64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:19:b9:f5:54:ad
[ 2.400388] ACPI: PCI Interrupt 0000:0e:08.0[A] -> GSI 192 (level, low) ->
IRQ 192
[ 2.400388] mptbase: ioc0: Initiating bringup
[ 3.173862] ioc0: LSISAS1068 B0: Capabilities={Initiator}
[ 3.173905] mptbase: ioc0: PCI-MSI enabled
[ 4.962384] scsi0 : ioc0: LSISAS1068 B0, FwRev=000a3100h, Ports=1, MaxQ=286,
IRQ=1270
[ 5.979699] scsi 0:0:0:0: Direct-Access SEAGATE ST973451SS SM04
PQ: 0 ANSI: 5
[ 5.995618] scsi 0:0:1:0: Direct-Access SEAGATE ST973451SS SM04
PQ: 0 ANSI: 5
[ 6.006364] scsi 0:1:0:0: Direct-Access Dell VIRTUAL DISK 1028
PQ: 0 ANSI: 5
[ 6.022293] Driver 'sd' needs updating - please use bus_type methods
[ 6.026343] sd 0:1:0:0: [sda] 142577664 512-byte hardware sectors (73000 MB)
[ 6.026343] sd 0:1:0:0: [sda] Write Protect is off
[ 6.026343] sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
[ 6.026343] sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.026343] sd 0:1:0:0: [sda] 142577664 512-byte hardware sectors (73000 MB)
[ 6.026343] sd 0:1:0:0: [sda] Write Protect is off
[ 6.026343] sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
[ 6.026343] sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.026343] sda: sda1 sda2 sda3
[ 6.037679] sd 0:1:0:0: [sda] Attached SCSI disk
[ 6.236346] JFS: nTxBlock = 8192, nTxLock = 65536
[ 7.506572] udevd version 125 started
[ 7.694514] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 7.794729] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.803140] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.831027] input: Power Button (FF) as /class/input/input2
[ 7.884773] ACPI: Power Button (FF) [PWRF]
[ 7.998204] EDAC MC: Ver: 2.1.0 Sep 10 2008
[ 8.014420] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV
0000:00:10.0
[ 8.014420] EDAC PCI0: Giving out device to module 'i5000_edac' controller
'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
[ 8.091430] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 8.091513] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2,
TCOBASE=0x0860)
[ 8.091539] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.144262] intel_rng: FWH not detected
[ 8.184023] input: PC Speaker as /class/input/input3
[ 8.533173] input: ImExPS/2 Generic Explorer Mouse as /class/input/input4
[ 9.043242] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.123832] Adding 7815612k swap on /dev/sda2. Priority:-1 extents:1
across:7815612k
[ 11.961858] loop: module loaded
[ 11.992556] Fusion MPT misc device (ioctl) driver 3.04.06
[ 11.992556] mptctl: Registered with Fusion MPT base driver
[ 11.992556] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 13.288867] bnx2: eth0: using MSI
[ 13.337858] bnx2: eth0 NIC SerDes Link is Up, 1000 Mbps full duplex
[ 14.015369] NET: Registered protocol family 10
[ 17.388839] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 26.221682] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
vzethdev 14592 0
vznetdev 24456 0
simfs 8944 0
vzdquota 42868 0 [permanent]
vzmon 31248 2 vzethdev,vznetdev
vzdev 7568 4 vzethdev,vznetdev,vzdquota,vzmon
xt_tcpudp 7680 0
xt_length 6400 0
ipt_ttl 6144 0
xt_tcpmss 6656 0
xt_TCPMSS 8576 0
iptable_mangle 8704 0
iptable_filter 8320 0
xt_multiport 7424 0
xt_limit 7172 0
xt_dscp 7168 0
ipt_REJECT 7552 0
ip_tables 21776 2 iptable_mangle,iptable_filter
x_tables 25736 10
xt_tcpudp,xt_length,ipt_ttl,xt_tcpmss,xt_TCPMSS,xt_multiport,xt_limit,xt_dscp,ipt_REJECT,ip_tables
video 24084 0
output 7808 1 video
ac 9352 0
battery 16904 0
ipv6 296256 17 vzmon
mptctl 28808 0
loop 19340 0
snd_pcsp 14588 0
snd_pcm 81928 1 snd_pcsp
snd_timer 25744 1 snd_pcm
snd 63688 3 snd_pcsp,snd_pcm,snd_timer
psmouse 42268 0
soundcore 12064 1 snd
rng_core 9096 0
serio_raw 9988 0
snd_page_alloc 13072 1 snd_pcm
iTCO_wdt 15696 0
i5000_edac 12936 0
edac_core 49560 3 i5000_edac
button 11680 0
shpchp 34080 0
pci_hotplug 32056 1 shpchp
evdev 14208 0
dcdbas 11952 0
jfs 157648 2
nls_base 12932 1 jfs
sd_mod 29376 4
mptsas 29968 3
mptscsih 29568 1 mptsas
mptbase 62052 3 mptctl,mptsas,mptscsih
ehci_hcd 36108 0
uhci_hcd 25760 0
scsi_transport_sas 37504 1 mptsas
scsi_mod 160888 5 mptctl,sd_mod,mptsas,mptscsih,scsi_transport_sas
bnx2 63496 0
firmware_class 12544 1 bnx2
thermal 22688 0
processor 42304 1 thermal
fan 9352 0
thermal_sys 17728 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5000P Chipset Memory Controller
Hub [8086:25d8] (rev 92)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 2 [8086:25e2] (rev 92)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
Memory behind bridge: f2000000-f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:03.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 3 [8086:25e3] (rev 92)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:04.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 4 [8086:25e4] (rev 92)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:05.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 5 [8086:25e5] (rev 92)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 6 [8086:25e6] (rev 92)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:07.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 7 [8086:25e7] (rev 92)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fc300000-fc5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers
[8086:25f0] (rev 92)
Subsystem: Dell Device [1028:01bb]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: i5000_edac
Kernel modules: i5000_edac
00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers
[8086:25f0] (rev 92)
Subsystem: Dell Device [1028:01bb]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel modules: i5000_edac
00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers
[8086:25f0] (rev 92)
Subsystem: Dell Device [1028:01bb]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel modules: i5000_edac
00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved
Registers [8086:25f1] (rev 92)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved
Registers [8086:25f3] (rev 92)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers
[8086:25f5] (rev 92)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers
[8086:25f6] (rev 92)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI
Express Root Port 1 [8086:2690] (rev 09)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
Memory behind bridge: f8000000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #1 [8086:2688] (rev 09)
Subsystem: Dell Device [1028:01bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at cce0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #2 [8086:2689] (rev 09)
Subsystem: Dell Device [1028:01bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at ccc0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20)
Subsystem: Dell Device [1028:01bb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fc600000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
d9) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fc100000-fc2fffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dfffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC
Interface Controller [8086:2670] (rev 09)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: intel-rng, iTCO_wdt
01:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103]
(rev c3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
Memory behind bridge: f8000000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708S
Gigabit Ethernet [14e4:16ac] (rev 12)
Subsystem: Dell Device [1028:01bb]
Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1269
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
Kernel modules: bnx2
03:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express
Upstream Port [8086:3500] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=04, subordinate=07, sec-latency=0
Memory behind bridge: f4000000-f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
03:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to
PCI-X Bridge [8086:350c] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=08, subordinate=08, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
04:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express
Downstream Port E1 [8086:3510] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=04, secondary=05, subordinate=06, sec-latency=0
Memory behind bridge: f4000000-f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
04:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express
Downstream Port E2 [8086:3514] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=04, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
05:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103]
(rev c3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=64
Memory behind bridge: f4000000-f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
06:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5708S
Gigabit Ethernet [14e4:16ac] (rev 12)
Subsystem: Dell Device [1028:01bb]
Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
Kernel modules: bnx2
0d:00.0 PCI bridge [0604]: Intel Corporation 6702PXH PCI Express-to-PCI Bridge
A [8086:032c] (rev 09)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0d, secondary=0e, subordinate=0e, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fc400000-fc5fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
0e:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068 PCI-X
Fusion-MPT SAS [1000:0054] (rev 01)
Subsystem: Dell Device [1028:1f08]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (16000ns min, 2500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1270
Region 0: I/O ports at ec00 [disabled] [size=256]
Region 1: Memory at fc4fc000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at fc4e0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at fc500000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: mptsas
Kernel modules: mptsas
0f:0d.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000
[1002:515e] (rev 02)
Subsystem: Dell Device [1028:01bb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at dc00 [size=256]
Region 2: Memory at fc1f0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fc100000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-openvz-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-openvz-amd64 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
ii vzctl 3.0.22-11 server virtualization solution - c
linux-image-2.6.26-1-openvz-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-openvz-amd64 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-openvz-amd64/preinst/overwriting-modules-2.6.26-1-openvz-amd64:
true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-openvz-amd64/postinst/old-system-map-link-2.6.26-1-openvz-amd64:
true
linux-image-2.6.26-1-openvz-amd64/postinst/bootloader-test-error-2.6.26-1-openvz-amd64:
linux-image-2.6.26-1-openvz-amd64/preinst/abort-install-2.6.26-1-openvz-amd64:
linux-image-2.6.26-1-openvz-amd64/prerm/removing-running-kernel-2.6.26-1-openvz-amd64:
true
linux-image-2.6.26-1-openvz-amd64/preinst/bootloader-initrd-2.6.26-1-openvz-amd64:
true
linux-image-2.6.26-1-openvz-amd64/postinst/bootloader-error-2.6.26-1-openvz-amd64:
linux-image-2.6.26-1-openvz-amd64/postinst/depmod-error-2.6.26-1-openvz-amd64:
false
linux-image-2.6.26-1-openvz-amd64/postinst/depmod-error-initrd-2.6.26-1-openvz-amd64:
false
linux-image-2.6.26-1-openvz-amd64/preinst/lilo-initrd-2.6.26-1-openvz-amd64:
true
linux-image-2.6.26-1-openvz-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-openvz-amd64:
true
linux-image-2.6.26-1-openvz-amd64/preinst/failed-to-move-modules-2.6.26-1-openvz-amd64:
linux-image-2.6.26-1-openvz-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-openvz-amd64/preinst/abort-overwrite-2.6.26-1-openvz-amd64:
linux-image-2.6.26-1-openvz-amd64/postinst/old-dir-initrd-link-2.6.26-1-openvz-amd64:
true
linux-image-2.6.26-1-openvz-amd64/postinst/old-initrd-link-2.6.26-1-openvz-amd64:
true
linux-image-2.6.26-1-openvz-amd64/preinst/initrd-2.6.26-1-openvz-amd64:
linux-image-2.6.26-1-openvz-amd64/preinst/elilo-initrd-2.6.26-1-openvz-amd64:
true
linux-image-2.6.26-1-openvz-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-openvz-amd64/postinst/create-kimage-link-2.6.26-1-openvz-amd64:
true
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
