Package: initramfs-tools Version: 0.92f Severity: important I had to try some RAID tests in d-i and I only had a USB stick for testing, so this scenario is not so likely, but I assume the same bug would happen with a USB disk, making it more likely.
Anyway, I made a RAID1 on top of a USB stick. initramfs-tools fails to boot: the RAID is initalized much earlier than the USB stick. What is strange that sd_mod was not loaded at all at the point it drops you into a shell. Log: [ 2.200000] rtc-s35390a 0-0030: setting system clock to 2008-08-24 10:16:17 UTC (1219572977) [ 2.210000] Freeing init memory: 108K Loading, please wait... Begin: Loading essential drivers ... [ 2.640000] SCSI subsystem initialized [ 2.720000] usbcore: registered new interface driver usbfs [ 2.720000] usbcore: registered new interface driver hub [ 2.730000] usbcore: registered new device driver usb [ 2.760000] Initializing USB Mass Storage driver... [ 2.760000] usbcore: registered new interface driver usb-storage [ 2.770000] USB Mass Storage support registered. [ 2.910000] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 2.920000] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 2.960000] orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000 [ 2.980000] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.980000] usb usb1: configuration #1 chosen from 1 choice [ 2.990000] hub 1-0:1.0: USB hub found [ 2.990000] hub 1-0:1.0: 1 port detected [ 3.110000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.110000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.120000] usb usb1: Product: Marvell Orion EHCI [ 3.120000] usb usb1: Manufacturer: Linux 2.6.25-2-orion5x ehci_hcd [ 3.130000] usb usb1: SerialNumber: orion-ehci.0 done. Begin: Running /scripts/init-premount ... [ 3.420000] usb 1-1: new high speed USB device using orion-ehci and address 2 [ 3.570000] usb 1-1: configuration #1 chosen from 1 choice [ 3.570000] hub 1-1:1.0: USB hub found [ 3.580000] hub 1-1:1.0: 4 ports detected [ 3.700000] usb 1-1: New USB device found, idVendor=05e3, idProduct=0607 [ 3.700000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.710000] usb 1-1: Product: USB2.0 Hub [ 3.950000] usb 1-1.1: new high speed USB device using orion-ehci and address 3 [ 4.120000] usb 1-1.1: configuration #1 chosen from 1 choice [ 4.170000] scsi0 : SCSI emulation for USB Mass Storage devices [ 4.190000] usb 1-1.1: New USB device found, idVendor=13fe, idProduct=1d00 [ 4.190000] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.200000] usb 1-1.1: Product: USB DISK 2.0 [ 4.200000] usb 1-1.1: Manufacturer: [ 4.210000] usb 1-1.1: SerialNumber: 0773165E067F done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Loading[ 6.190000] md: raid1 personality registered for level 1 Success: loaded module raid1. done. Begin: Assembling all MD arrays ... [ 6.270000] md: md0 stopped. mdadm: no devices found for /dev/md0 Failure: failed to assemble all arrays. done. Begin: Waiting for udev to process events ... done. done. Begin: Running /scripts/local-premount ... done. mount: No such device Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... mount: No such file or directory done. mount: No such file or directory mount: No such file or directory Target filesystem doesn't have /sbin/init. No init found. Try passing init= bootarg. BusyBox v1.10.2 (Debian 1:1.10.2-1) built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off (initramfs) [ 9.210000] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS (initramfs) cat /proc/modules raid1 24960 0 - Live 0xbf084000 md_mod 87540 1 raid1, Live 0xbf06d000 ehci_hcd 36972 0 - Live 0xbf062000 usb_storage 89351 0 - Live 0xbf04b000 usbcore 139260 3 ehci_hcd,usb_storage, Live 0xbf028000 scsi_mod 159300 1 usb_storage, Live 0xbf000000 (initramfs) modprobe sd_mod [ 34.380000] Driver 'sd' needs updating - please use bus_type methods [ 34.630000] sd 0:0:0:0: [sda] 2009088 512-byte hardware sectors (1029 MB) [ 34.640000] sd 0:0:0:0: [sda] Write Protect is off [ 34.640000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 34.650000] sd 0:0:0:0: [sda] 2009088 512-byte hardware sectors (1029 MB) [ 34.660000] sd 0:0:0:0: [sda] Write Protect is off [ 34.660000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 34.670000] sda: sda1 sda2 sda3 < sda5 > [ 35.320000] sd 0:0:0:0: [sda] Attached SCSI removable disk (initramfs) -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
