Package: linux-image-2.6.26-1-686
Version: 2.6.26-1
Severity: normal
Dear Maintainers,
after upgrading to Kernel 2.6.26 I have loads >1 but no CPU usage. I discoverd
that kacpid kernelthread is in uninteruptible sleep:
$ ps axu | grep kacpid | grep -v grep
root 41 0.0 0.0 0 0 ? D< 14:58 0:01 [kacpid]
'acpi -V' hang in uninteruptible sleep too and isn't killable any more:
$ acpi -V
Battery 1: Full, 97%
AC Adapter 0: on-line
Kernel linux-image-2.6.25-2-686 works well.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-1) ([EMAIL PROTECTED]) (gcc version
4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Jul 30 20:02:15 UTC
2008
** Command line:
root=UUID=cfa47139-db7a-41b0-a5dd-2d8d5b19b771 ro
** Not tainted
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-1) ([EMAIL PROTECTED])
(gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Jul 30
20:02:15 UTC 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003feec000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003feec000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 261856) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261856
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261856
[ 0.000000] On node 0 totalpages: 261856
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32226 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F62C0, 0014 (r0 ACER )
[ 0.000000] ACPI: RSDT 3FEE6205, 0030 (r1 ACER Kestrel 20021012 LTP
0)
[ 0.000000] ACPI: FACP 3FEEBF2C, 0074 (r1 ACER Kestrel 20021012 PTL
50)
[ 0.000000] ACPI: DSDT 3FEE6235, 5CF7 (r1 ACER Kestrel 20021012 MSFT
100000E)
[ 0.000000] ACPI: FACS 3FEFCFC0, 0040
[ 0.000000] ACPI: HPET 3FEEBFA0, 0038 (r1 ACER Kestrel 20021012 PTL
0)
[ 0.000000] ACPI: BOOT 3FEEBFD8, 0028 (r1 ACER Kestrel 20021012 LTP
1)
[ 0.000000] ACPI: DMI detected: Acer
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 is invalid
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bec10000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 259810
[ 0.000000] Kernel command line:
root=UUID=cfa47139-db7a-41b0-a5dd-2d8d5b19b771 ro
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (0180f000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1598.697 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1027920k/1047424k available (1758k kernel code, 18744k
reserved, 743k data, 244k init, 129920k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc0379000 - 0xc03b6000 ( 244 kB)
[ 0.004000] .data : 0xc02b78eb - 0xc0371620 ( 743 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02b78eb (1758 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084076] Calibrating delay using timer specific routine.. 3199.89
BogoMIPS (lpj=6399781)
[ 0.084205] Security Framework initialized
[ 0.084254] SELinux: Disabled at boot.
[ 0.084301] Capability LSM initialized
[ 0.084359] Mount-cache hash table entries: 512
[ 0.084548] Initializing cgroup subsys ns
[ 0.084597] Initializing cgroup subsys cpuacct
[ 0.084644] Initializing cgroup subsys devices
[ 0.084708] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084786] CPU: L2 cache: 2048K
[ 0.084832] Intel machine check architecture supported.
[ 0.084882] Intel machine check reporting enabled on CPU#0.
[ 0.084940] Checking 'hlt' instruction... OK.
[ 0.100410] SMP alternatives: switching to UP code
[ 0.105947] Freeing SMP alternatives: 16k freed
[ 0.105994] ACPI: Core revision 20080321
[ 0.115641] ACPI: setting ELCR to 0200 (from 0440)
[ 0.120007] weird, boot CPU (#0) not listedby the BIOS.
[ 0.120007] SMP motherboard not detected.
[ 0.120007] Local APIC not detected. Using dummy APIC emulation.
[ 0.120007] SMP disabled
[ 0.120007] Brought up 1 CPUs
[ 0.120007] Total of 1 processors activated (3199.89 BogoMIPS).
[ 0.120007] CPU0 attaching sched-domain:
[ 0.120007] domain 0: span 0
[ 0.120007] groups: 0
[ 0.120007] net_namespace: 660 bytes
[ 0.120007] Booting paravirtualized kernel on bare hardware
[ 0.120007] NET: Registered protocol family 16
[ 0.120007] ACPI: bus type pci registered
[ 0.120007] PCI: PCI BIOS revision 2.10 entry at 0xfd782, last bus=2
[ 0.120007] PCI: Using configuration type 1 for base access
[ 0.120007] Setting up standard PCI resources
[ 0.138420] ACPI: EC: Look up EC in DSDT
[ 0.142098] ACPI: Interpreter enabled
[ 0.142145] ACPI: (supports S0 S3 S4 S5)
[ 0.142320] ACPI: Using PIC for interrupt routing
[ 0.144007] ACPI: EC: non-query interrupt received, switching to interrupt
mode
[ 0.144009] ACPI: EC: GPE storm detected, disabling EC GPE
[ 0.441415] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[ 0.441468] ACPI: EC: driver started in poll mode
[ 0.441556] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.442024] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4
ACPI/GPIO/TCO
[ 0.442087] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.442638] PCI: Transparent bridge - 0000:00:1e.0
[ 0.442715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.442995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.443014] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.445800] ACPI: PCI Interrupt Link [LNKA] (IRQs *6)
[ 0.446054] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.446303] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.446552] ACPI: PCI Interrupt Link [LNKD] (IRQs *6)
[ 0.446799] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[ 0.447048] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
[ 0.447359] ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled.
[ 0.447670] ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
[ 0.447947] ACPI: Power Resource [PFN0] (off)
[ 0.448061] ACPI: Power Resource [PFN1] (off)
[ 0.448212] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.448291] pnp: PnP ACPI init
[ 0.448339] ACPI: bus type pnp registered
[ 0.451722] pnp: PnP ACPI: found 9 devices
[ 0.451769] ACPI: ACPI bus type pnp unregistered
[ 0.451816] PnPBIOS: Disabled by ACPI PNP
[ 0.452098] PCI: Using ACPI for IRQ routing
[ 0.452330] system 00:04: ioport range 0x164e-0x164f has been reserved
[ 0.452383] system 00:04: ioport range 0x600-0x60f has been reserved
[ 0.452434] system 00:04: ioport range 0x700-0x70f has been reserved
[ 0.452485] system 00:04: ioport range 0x800-0x80f has been reserved
[ 0.452536] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 0.452588] system 00:04: ioport range 0x1180-0x11bf has been reserved
[ 0.452639] system 00:04: ioport range 0x1c0-0x1cf has been reserved
[ 0.452691] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[ 0.452742] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.452793] system 00:04: ioport range 0x610-0x61f has been reserved
[ 0.452845] system 00:04: iomem range 0xfec10000-0xfec1ffff could not be
reserved
[ 0.452906] system 00:04: iomem range 0xff800000-0xffbfffff could not be
reserved
[ 0.452967] system 00:04: iomem range 0xfff00000-0xffffffff could not be
reserved
[ 0.453028] system 00:04: iomem range 0x0-0x9ffff could not be reserved
[ 0.453080] system 00:04: iomem range 0xe0000-0xfffff could not be reserved
[ 0.453132] system 00:04: iomem range 0xdf800-0xdffff has been reserved
[ 0.483589] PCI: region 0000:02:06.0/9 too large:
0x0000000000000000-0x0000000003ffffff
[ 0.483659] PCI: Bridge: 0000:00:01.0
[ 0.483703] IO window: 3000-3fff
[ 0.483749] MEM window: 0xd0100000-0xd01fffff
[ 0.483796] PREFETCH window: 0x00000000d8000000-0x00000000dfffffff
[ 0.483851] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[ 0.483898] IO window: 0x00004000-0x000040ff
[ 0.483946] IO window: 0x00004400-0x000044ff
[ 0.483994] MEM window: 0x54000000-0x57ffffff
[ 0.484050] PCI: Bridge: 0000:00:1e.0
[ 0.484094] IO window: 4000-4fff
[ 0.484141] MEM window: 0xd0200000-0xd05fffff
[ 0.484189] PREFETCH window: 0x0000000050000000-0x00000000500fffff
[ 0.484252] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.484263] pci 0000:02:06.0: enabling device (0104 -> 0107)
[ 0.484495] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
[ 0.484545] PCI: setting IRQ 10 as level-triggered
[ 0.484549] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKE] -> GSI 10
(level, low) -> IRQ 10
[ 0.484691] NET: Registered protocol family 2
[ 0.484824] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.485126] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.486276] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.487099] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.487153] TCP reno registered
[ 0.487345] NET: Registered protocol family 1
[ 0.487536] checking if image is initramfs... it is
[ 0.984070] Switched to high resolution mode on CPU 0
[ 1.127754] Freeing initrd memory: 6464k freed
[ 1.128096] Simple Boot Flag at 0x37 set to 0x1
[ 1.128540] audit: initializing netlink socket (disabled)
[ 1.128606] type=2000 audit(1218286720.128:1): initialized
[ 1.128821] highmem bounce pool size: 64 pages
[ 1.128871] Total HugeTLB memory allocated, 0
[ 1.129003] VFS: Disk quotas dquot_6.5.1
[ 1.129078] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.129171] msgmni has been set to 1767
[ 1.129938] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
254)
[ 1.130000] io scheduler noop registered
[ 1.130045] io scheduler anticipatory registered
[ 1.130091] io scheduler deadline registered
[ 1.130149] io scheduler cfq registered (default)
[ 1.130274] pci 0000:01:00.0: Boot video device
[ 1.130639] isapnp: Scanning for PnP cards...
[ 1.484535] isapnp: No Plug & Play device found
[ 1.487306] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 1.487525] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 1.488181] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 1.488233] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 1.488361] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 1.489785] brd: module loaded
[ 1.489924] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq
1,12
[ 1.492161] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.494081] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.494132] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.494181] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.494229] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.494277] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.494467] mice: PS/2 mouse device common for all mice
[ 1.494592] cpuidle: using governor ladder
[ 1.494638] cpuidle: using governor menu
[ 1.494686] No iBFT detected.
[ 1.495159] TCP cubic registered
[ 1.495204] NET: Registered protocol family 17
[ 1.495255] Using IPI No-Shortcut mode
[ 1.495489] registered taskstats version 1
[ 1.495799] Freeing unused kernel memory: 244k freed
[ 1.588161] ACPI: Transitioning device [FAN0] to D3
[ 1.588268] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 1.588329] ACPI: Fan [FAN0] (off)
[ 1.588491] ACPI: Transitioning device [FAN1] to D3
[ 1.588578] ACPI: PNP0C0B:01 is registered as cooling_device1
[ 1.588630] ACPI: Fan [FAN1] (off)
[ 1.593623] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.593832] ACPI: ACPI0007:00 is registered as cooling_device2
[ 1.593884] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.600512] Marking TSC unstable due to: TSC halts in idle.
[ 1.621121] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.664439] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.749548] ACPI: Thermal Zone [THRM] (60 C)
[ 1.980023] Clocksource tsc unstable (delta = -130689451 ns)
[ 2.206892] usbcore: registered new interface driver usbfs
[ 2.206974] usbcore: registered new interface driver hub
[ 2.207061] usbcore: registered new device driver usb
[ 2.208348] USB Universal Host Controller Interface driver v3.0
[ 2.208677] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6
[ 2.208728] PCI: setting IRQ 6 as level-triggered
[ 2.208732] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6
(level, low) -> IRQ 6
[ 2.208862] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.208866] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.209041] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 2.209121] uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001800
[ 2.209249] usb usb1: configuration #1 chosen from 1 choice
[ 2.209324] hub 1-0:1.0: USB hub found
[ 2.209373] hub 1-0:1.0: 2 ports detected
[ 2.312139] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.312199] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.312259] usb usb1: Product: UHCI Host Controller
[ 2.312306] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.312355] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.312694] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
[ 2.312745] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 6
(level, low) -> IRQ 6
[ 2.312875] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.312880] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.312951] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 2.313030] uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001820
[ 2.313157] usb usb2: configuration #1 chosen from 1 choice
[ 2.313234] hub 2-0:1.0: USB hub found
[ 2.313284] hub 2-0:1.0: 2 ports detected
[ 2.367390] No dock devices found.
[ 2.389463] SCSI subsystem initialized
[ 2.404843] libata version 3.00 loaded.
[ 2.416143] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.416202] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.416262] usb usb2: Product: UHCI Host Controller
[ 2.416309] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.416358] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.416749] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6
[ 2.416799] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6
(level, low) -> IRQ 6
[ 2.416931] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.416935] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.417007] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 2.417088] uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001840
[ 2.417221] usb usb3: configuration #1 chosen from 1 choice
[ 2.417299] hub 3-0:1.0: USB hub found
[ 2.417348] hub 3-0:1.0: 2 ports detected
[ 2.520141] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.520199] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.520260] usb usb3: Product: UHCI Host Controller
[ 2.520307] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.520356] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.521059] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
[ 2.521110] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10
(level, low) -> IRQ 10
[ 2.521247] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.521252] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.521324] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 4
[ 2.525306] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.525356] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 2.525366] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000
[ 2.540049] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 2.540185] usb usb4: configuration #1 chosen from 1 choice
[ 2.540262] hub 4-0:1.0: USB hub found
[ 2.540313] hub 4-0:1.0: 6 ports detected
[ 2.644125] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.644182] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.644242] usb usb4: Product: EHCI Host Controller
[ 2.644289] usb usb4: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 2.644338] usb usb4: SerialNumber: 0000:00:1d.7
[ 2.647039] ACPI: PCI Interrupt 0000:02:06.2[A] -> Link [LNKE] -> GSI 10
(level, low) -> IRQ 10
[ 2.696936] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]
MMIO=[d020a000-d020a7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.697738] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 6
(level, low) -> IRQ 6
[ 2.756091] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[ 2.763067] b44.c:v2.0
[ 2.763198] Uniform Multi-Platform E-IDE driver
[ 2.763246] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 2.763803] ICH4: IDE controller (0x8086:0x24ca rev 0x03) at PCI slot
0000:00:1f.1
[ 2.763869] PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
[ 2.763924] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6
(level, low) -> IRQ 6
[ 2.764072] ICH4: not 100% native mode: will probe irqs later
[ 2.764128] ide0: BM-DMA at 0x1860-0x1867
[ 2.764179] ide1: BM-DMA at 0x1868-0x186f
[ 2.764227] Probing IDE interface ide0...
[ 2.784407] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:72:7c:d0
[ 2.830427] udev: renamed network interface eth0 to lan
[ 3.052157] hda: ST9160821A, ATA DISK drive
[ 3.724273] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.724438] hda: UDMA/100 mode selected
[ 3.724694] Probing IDE interface ide1...
[ 3.968340] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f000036e2b0]
[ 4.460360] hdc: MATSHITAUJ-831D, ATAPI CD/DVD-ROM drive
[ 4.796258] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.796541] hdc: UDMA/33 mode selected
[ 4.796992] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.797089] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.827944] hda: max request size: 512KiB
[ 4.829241] hda: 312581808 sectors (160041 MB) w/8192KiB Cache,
CHS=19457/255/63
[ 4.829638] hda: cache flushes supported
[ 4.829718] hda: hda1 hda2 hda3 hda4
[ 4.872922] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 4.873157] Uniform CD-ROM driver Revision: 3.20
[ 5.218200] device-mapper: uevent: version 1.0.3
[ 5.218988] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
[EMAIL PROTECTED]
[ 5.235554] PM: Starting manual resume from disk
[ 5.279089] kjournald starting. Commit interval 5 seconds
[ 5.279089] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.078097] ACPI: WMI: Mapper loaded
[ 7.211506] acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
[ 7.211573] acer-wmi: No or unsupported WMI interface, unable to load
[ 7.338635] Linux agpgart interface v0.103
[ 7.364276] agpgart: Detected an Intel 855GM Chipset.
[ 7.385060] agpgart: AGP aperture is 256M @ 0xe0000000
[ 7.441836] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.448324] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.673375] input: Power Button (FF) as /class/input/input1
[ 7.700763] ACPI: Power Button (FF) [PWRF]
[ 7.700894] input: Lid Switch as /class/input/input2
[ 7.748098] ACPI: Lid Switch [LID]
[ 7.748207] input: Sleep Button (CM) as /class/input/input3
[ 7.776064] ACPI: Sleep Button (CM) [SLPB]
[ 8.035923] input: Video Bus as /class/input/input4
[ 8.063115] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 8.317088] ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: found ejectable bay
[ 8.317094] ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: Adding notify handler
[ 8.317128] ACPI: Bay [\_SB_.PCI0.IDE0.SECN.BAY1] Added
[ 8.544164] ACPI: SBS HC: EC = 0xf741c2c0, offset = 0x18, query_bit = 0x20
[ 8.664199] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 8.664324] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[ 8.664400] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.686381] intel_rng: FWH not detected
[ 8.826229] ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 9.336075] ACPI: Smart Battery System [SBS0]: AC Adapter [AC0] (on-line)
[ 9.441230] Yenta: CardBus bridge found at 0000:02:06.0 [1025:0064]
[ 9.441301] yenta 0000:02:06.0: Preassigned resource 2 busy or not
available, reconfiguring...
[ 9.441364] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[ 9.441411] IO window: 0x00004000-0x000040ff
[ 9.441459] IO window: 0x00004400-0x000044ff
[ 9.441507] PREFETCH window: 0x50020000-0x5003ffff
[ 9.441556] MEM window: 0x54000000-0x57ffffff
[ 9.441605] Yenta: Enabling burst memory read transactions
[ 9.441655] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 9.441704] Yenta: Routing CardBus interrupts to PCI
[ 9.441753] Yenta TI: socket 0000:02:06.0, mfunc 0x01a21b22, devctl 0x64
[ 9.444898] ieee80211_crypt: registered algorithm 'NULL'
[ 9.447708] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 9.447760] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL
PROTECTED]>
[ 9.490818] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver,
1.2.2kmprq
[ 9.490884] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 9.580758] input: PC Speaker as /class/input/input5
[ 9.672599] Yenta: ISA IRQ mask 0x08b8, PCI irq 10
[ 9.672653] Socket status: 30000006
[ 9.672698] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to
#06
[ 9.672761] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[ 9.672812] cs: IO port probe 0x4000-0x4fff: clean.
[ 9.673149] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd05fffff
[ 9.673202] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x500fffff
[ 9.808010] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps:
0xa04713/0x4000
[ 9.851918] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[ 9.894758] NET: Registered protocol family 23
[ 9.928442] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 9.944477] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 9.944569] firmware: requesting ipw2200-bss.fw
[ 9.944808] nsc-ircc, chip->init
[ 9.944859] nsc-ircc, Found chip at base=0x164e
[ 9.944927] nsc-ircc, driver loaded (Dag Brattli)
[ 9.944976] nsc_ircc_open(), can't get iobase of 0x2f8
[ 9.945048] nsc-ircc, Found chip at base=0x164e
[ 9.945116] nsc-ircc, driver loaded (Dag Brattli)
[ 9.945164] nsc_ircc_open(), can't get iobase of 0x2f8
[ 9.945380] nsc-ircc 00:08: disabled
[ 9.955210] Error: Driver 'pcspkr' is already registered, aborting...
[ 10.314642] cs: IO port probe 0x100-0x3af: clean.
[ 10.316311] cs: IO port probe 0x3e0-0x4ff: clean.
[ 10.317062] cs: IO port probe 0x820-0x8ff: clean.
[ 10.317698] cs: IO port probe 0xc00-0xcf7: clean.
[ 10.318453] cs: IO port probe 0xa00-0xaff: clean.
[ 10.604075] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a
channels)
[ 10.604075] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 10.604075] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 10.604075] udev: renamed network interface eth0 to wlan0
[ 10.924155] intel8x0_measure_ac97_clock: measured 53920 usecs
[ 10.924212] intel8x0: clocking to 48000
[ 10.924458] ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [LNKE] -> GSI 10
(level, low) -> IRQ 10
[ 11.040107] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10
(level, low) -> IRQ 10
[ 11.040253] PCI: Setting latency timer of device 0000:00:1f.6 to 64
[ 11.396414] MC'97 0 converters and GPIO not ready (0x1)
[ 12.724307] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery
present)
[ 13.036274] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT1] (battery
absent)
** Loaded modules:
Module Size Used by
radeon 118688 2
drm 65256 3 radeon
pktcdvd 24860 1
cpufreq_ondemand 6476 1
autofs4 16420 1
ac 3264 0
battery 6272 0
ieee80211_crypt_ccmp 4992 2
xfs 458040 5
aes_i586 7744 3
aes_generic 29256 1 aes_i586
cbc 3264 1
dm_crypt 11172 1
crypto_blkcipher 15236 3 cbc,dm_crypt
acpi_cpufreq 6796 0
freq_table 4224 2 cpufreq_ondemand,acpi_cpufreq
ipv6 235204 38
loop 12748 0
snd_intel8x0m 12492 0
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
joydev 8480 0
snd_intel8x0 26268 2
irda 95480 0
snd_ac97_codec 88484 2 snd_intel8x0m,snd_intel8x0
crc_ccitt 2080 1 irda
ac97_bus 1728 1 snd_ac97_codec
snd_pcm 62628 4
snd_intel8x0m,snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_seq_dummy 2660 0
pcspkr 2432 0
tifm_7xx1 5216 0
ipw2200 123560 0
tifm_core 7548 1 tifm_7xx1
ieee80211 27048 1 ipw2200
ieee80211_crypt 5124 2 ieee80211_crypt_ccmp,ieee80211
yenta_socket 20620 1
rsrc_nonstatic 9504 1 yenta_socket
snd_seq_oss 24960 0
snd_seq_midi_event 6432 1 snd_seq_oss
snd_seq 41456 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd 45604 14
snd_intel8x0m,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
sbs 6688 0
psmouse 32336 0
serio_raw 4740 0
soundcore 6368 1 snd
snd_page_alloc 7816 3 snd_intel8x0m,snd_intel8x0,snd_pcm
i2c_i801 7920 0
i2c_core 19828 1 i2c_i801
rng_core 3940 0
iTCO_wdt 9508 0
sbshc 5184 1 sbs
bay 4160 0
container 3456 0
video 16400 0
output 2912 1 video
button 6064 0
shpchp 25528 0
pci_hotplug 23460 1 shpchp
intel_agp 22300 1
agpgart 28776 2 drm,intel_agp
led_class 3908 0
evdev 8000 5
wmi 6440 0
ext3 105256 1
jbd 39380 1 ext3
mbcache 7108 1 ext3
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_snapshot 14340 0
dm_mod 46184 26 dm_crypt,dm_mirror,dm_log,dm_snapshot
ide_cd_mod 27524 1
cdrom 30176 2 pktcdvd,ide_cd_mod
ide_disk 10496 4
ide_pci_generic 3908 0 [permanent]
piix 6568 0 [permanent]
ide_core 92628 4 ide_cd_mod,ide_disk,ide_pci_generic,piix
b44 22288 0
ata_generic 4676 0
libata 140416 1 ata_generic
scsi_mod 129356 1 libata
dock 8272 2 bay,libata
ohci1394 24944 0
ieee1394 75800 1 ohci1394
ssb 33476 1 b44
pcmcia 29548 1 ssb
pcmcia_core 31892 4 yenta_socket,rsrc_nonstatic,ssb,pcmcia
firmware_class 6816 2 ipw2200,pcmcia
mii 4896 1 b44
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 118160 3 ehci_hcd,uhci_hcd
thermal 15228 0
processor 32548 3 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller [8086:3580] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller [8086:3584] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller [8086:3585] (rev 02)
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to AGP Controller [8086:3581] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d0100000-d01fffff
Prefetchable memory behind bridge: d8000000-dfffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 6
Region 4: I/O ports at 1800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 6
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 6
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller [8086:24cd] (rev 03) (prog-if 20)
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 83)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort+ <TAbort-
<MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0200000-d05fffff
Prefetchable memory behind bridge: 50000000-500fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface
Bridge [8086:24cc] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE
Controller [8086:24ca] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 6
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1860 [size=16]
Region 5: Memory at 50100000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller [8086:24c3] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at d0000c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at d0000800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller [8086:24c6] (rev 03)
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH Modem
Kernel modules: snd-intel8x0m
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 [Mobility
Radeon 9600 M10] [1002:4e50]
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B+ DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 6
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at d0120000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
02:02.0 Ethernet controller [0200]: Broadcom Corporation BCM4401 100Base-T
[14e4:4401] (rev 01)
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 6
Region 0: Memory at d0204000 (32-bit, non-prefetchable) [size=8K]
[virtual] Expansion ROM at 50000000 [disabled] [size=16K]
Capabilities: <access denied>
Kernel driver in use: b44
Kernel modules: b44
02:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG
Network Connection [8086:4220] (rev 05)
Subsystem: Intel Corporation Device [8086:2701]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0208000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
Kernel modules: ipw2200
02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus
Controller [104c:8031]
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0209000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 50020000-5003f000 (prefetchable)
Memory window 1: 54000000-57fff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:06.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE 1394
Host Controller [104c:8032] (prog-if 10)
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d020a000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
02:06.3 Mass storage controller [0180]: Texas Instruments PCIxx21 Integrated
FlashMedia Controller [104c:8033]
Subsystem: Acer Incorporated [ALI] Device [1025:0064]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0206000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: tifm_7xx1
Kernel modules: tifm_7xx1
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92e tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-13 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-44 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information excluded
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
