Package: linux-image-2.6.25-2-amd64
Version: 2.6.25-7
Followup-For: Bug #479101
I have the same problem with kernel 2.6.25-2 and lilo 1:22.8-5.
This problem does not exists when I using grub 0.97-41 as a bootloader.
-- Package-specific info:
** Version:
Linux version 2.6.25-2-amd64 (Debian 2.6.25-7) ([EMAIL PROTECTED]) (gcc version
4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Mon Jul 14 11:05:23 UTC
2008
** Command line:
root=UUID=de2915c1-021d-4d65-8423-10b645258de9 ro
** Not tainted
** Kernel log:
[ 5.720995] usb 1-4: USB disconnect, address 3
[ 5.835158] kjournald starting. Commit interval 5 seconds
[ 5.835158] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.864732] usb 1-7: USB disconnect, address 4
[ 6.312092] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 6.599406] hub 2-0:1.0: unable to enumerate USB device on port 4
[ 6.820202] hub 2-0:1.0: unable to enumerate USB device on port 7
[ 7.149494] usb 1-2: new full speed USB device using ohci_hcd and address 5
[ 7.366650] usb 1-2: configuration #1 chosen from 1 choice
[ 7.369813] usb 1-2: New USB device found, idVendor=1131, idProduct=1001
[ 7.369846] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.369874] usb 1-2: Product: ISSCEDRBTA
[ 7.369901] usb 1-2: Manufacturer: ISSC
[ 7.512890] hdc: UDMA/33 mode selected
[ 7.671152] usb 1-4: new full speed USB device using ohci_hcd and address 6
[ 7.886689] usb 1-4: configuration #1 chosen from 1 choice
[ 7.904567] scsi5 : SCSI emulation for USB Mass Storage devices
[ 7.915296] usb 1-4: New USB device found, idVendor=0aec, idProduct=3050
[ 7.915330] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.915359] usb 1-4: Product: USB Storage Device
[ 7.915386] usb 1-4: Manufacturer: Generic
[ 7.915412] usb 1-4: SerialNumber: 0AEC305000001A000
[ 7.915453] usb-storage: device found at 6
[ 7.915455] usb-storage: waiting for device to settle before scanning
[ 7.998652] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 7.998703] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 8.219188] usb 1-7: new low speed USB device using ohci_hcd and address 7
[ 8.229706] input: Power Button (FF) as /class/input/input3
[ 8.255211] ACPI: Power Button (FF) [PWRF]
[ 8.255316] input: Power Button (CM) as /class/input/input4
[ 8.283234] ACPI: Power Button (CM) [PWRB]
[ 8.432715] usb 1-7: configuration #1 chosen from 1 choice
[ 8.442842] input: KEYBOARD USB KB as /class/input/input5
[ 8.467251] input,hidraw0: USB HID v1.10 Keyboard [KEYBOARD USB KB] on
usb-0000:00:02.0-7
[ 8.475983] input: KEYBOARD USB KB as /class/input/input6
[ 8.519268] input,hidraw1: USB HID v1.10 Mouse [KEYBOARD USB KB] on
usb-0000:00:02.0-7
[ 8.519469] usb 1-7: New USB device found, idVendor=05d5, idProduct=6782
[ 8.519497] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.519525] usb 1-7: Product: USB KB
[ 8.519552] usb 1-7: Manufacturer: KEYBOARD
[ 9.009600] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 9.009633] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22
(level, low) -> IRQ 22
[ 9.009727] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 9.207296] input: PC Speaker as /class/input/input7
[ 9.331246] intel8x0_measure_ac97_clock: measured 54671 usecs
[ 9.331279] intel8x0: clocking to 46861
[ 9.566667] Bluetooth: Core ver 2.11
[ 9.578633] NET: Registered protocol family 31
[ 9.578666] Bluetooth: HCI device and connection manager initialized
[ 9.578697] Bluetooth: HCI socket layer initialized
[ 9.588717] Bluetooth: HCI USB driver ver 2.9
[ 9.590861] usbcore: registered new interface driver hci_usb
[ 9.790291] input: ImPS/2 Generic Wheel Mouse as /class/input/input8
[ 9.817793] pnp: the driver 'parport_pc' has been registered
[ 9.817813] parport_pc 00:08: reported by Plug and Play ACPI
[ 9.817892] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 9.911349] parport_pc 00:08: driver attached
[ 10.541353] hdc: UDMA/33 mode selected
[ 11.613104] Adding 4000176k swap on /dev/sda2. Priority:-1 extents:1
across:4000176k
[ 12.158210] EXT3 FS on sda1, internal journal
[ 12.981948] usb-storage: device scan complete
[ 12.996282] scsi 5:0:0:0: Direct-Access Generic USB Storage-SMC 500A
PQ: 0 ANSI: 0 CCS
[ 13.002672] scsi 5:0:0:1: Direct-Access Generic USB Storage-CFC 500A
PQ: 0 ANSI: 0 CCS
[ 13.011865] scsi 5:0:0:2: Direct-Access Generic USB Storage-MMC 500A
PQ: 0 ANSI: 0 CCS
[ 13.020150] scsi 5:0:0:3: Direct-Access Generic USB Storage-MSC 500A
PQ: 0 ANSI: 0 CCS
[ 13.030668] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 13.041675] sd 5:0:0:1: [sdc] Attached SCSI removable disk
[ 13.052680] sd 5:0:0:2: [sdd] Attached SCSI removable disk
[ 13.063676] sd 5:0:0:3: [sde] Attached SCSI removable disk
[ 13.208627] it87: Found IT8712F chip at 0x290, revision 7
[ 13.208665] it87: in3 is VCC (+5V)
[ 13.208691] it87: in7 is VCCH (+5V Stand-By)
[ 13.437006] fuse init (API version 7.9)
[ 14.280658] kjournald starting. Commit interval 5 seconds
[ 14.280824] EXT3 FS on sda3, internal journal
[ 14.280824] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.727161] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.753685] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 15.448714] NET: Registered protocol family 10
[ 15.449625] lo: Disabled Privacy Extensions
[ 15.675518] Bridge firewalling registered
[ 15.677157] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 22.898802] Bluetooth: L2CAP ver 2.9
[ 22.898835] Bluetooth: L2CAP socket layer initialized
[ 22.942449] Bluetooth: RFCOMM socket layer initialized
[ 22.942497] Bluetooth: RFCOMM TTY layer initialized
[ 22.942525] Bluetooth: RFCOMM ver 1.8
[ 22.979957] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
[ 22.979990] Bluetooth: BNEP filters: protocol multicast
[ 26.357929] [drm] Initialized drm 1.1.0 20060810
[ 26.369670] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 26.369670] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC3] -> GSI 18
(level, low) -> IRQ 18
[ 26.369670] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 26.369670] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[ 26.663099] pan0: no IPv6 routers present
[ 26.889442] eth0: no IPv6 routers present
[ 28.291931] [drm] Setting GART location based on new memory map
[ 28.291931] [drm] Loading R300 Microcode
[ 28.291931] [drm] writeback test succeeded in 1 usecs
[ 67.843847] PPP generic driver version 2.4.2
** Loaded modules:
Module Size Used by
ppp_async 16512 1
crc_ccitt 6656 1 ppp_async
ppp_generic 33448 5 ppp_async
slhc 10624 1 ppp_generic
radeon 128672 1
drm 99112 2 radeon
bnep 21504 2
rfcomm 46112 3
l2cap 29696 9 bnep,rfcomm
video 27412 0
output 8704 1 video
ac 9344 0
battery 14208 0
bridge 61352 0
ipv6 294120 16
ipt_MASQUERADE 8448 6
iptable_nat 12048 1
nf_nat 25624 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 23696 3 iptable_nat,nf_nat
nf_conntrack 76304 4
ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
iptable_filter 8192 0
ip_tables 25488 2 iptable_nat,iptable_filter
x_tables 28168 3 ipt_MASQUERADE,iptable_nat,ip_tables
fuse 53440 0
snd_seq_dummy 8580 0
snd_seq_oss 36736 0
snd_seq_midi 13376 0
snd_rawmidi 31008 1 snd_seq_midi
snd_seq_midi_event 12544 2 snd_seq_oss,snd_seq_midi
snd_seq 58912 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_seq_device 12948 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
it87 31256 0
hwmon_vid 7680 1 it87
eeprom 12560 0
lm90 21416 0
joydev 17664 0
hci_usb 21148 2
bluetooth 65444 8 bnep,rfcomm,l2cap,hci_usb
parport_pc 34344 0
parport 44848 1 parport_pc
serio_raw 11652 0
pcspkr 7808 0
psmouse 45724 0
k8temp 10624 0
snd_intel8x0 41128 5
snd_ac97_codec 118488 1 snd_intel8x0
ac97_bus 6528 1 snd_ac97_codec
snd_pcm_oss 46752 0
snd_mixer_oss 21376 1 snd_pcm_oss
snd_pcm 88072 5 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 29328 4 snd_seq,snd_pcm
snd 66888 16
snd_seq_oss,snd_rawmidi,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 13088 1 snd
snd_page_alloc 15120 2 snd_intel8x0,snd_pcm
button 13856 0
i2c_nforce2 11904 0
i2c_core 30752 3 eeprom,lm90,i2c_nforce2
evdev 17408 4
ext3 139408 2
jbd 55336 1 ext3
mbcache 13956 1 ext3
ide_cd_mod 41504 0
cdrom 39464 1 ide_cd_mod
sd_mod 33728 4
amd74xx 13576 0 [permanent]
usbhid 49632 0
hid 44736 1 usbhid
ff_memless 10248 1 usbhid
usb_storage 94400 0
8139cp 28544 0
ide_pci_generic 9476 0 [permanent]
ide_core 138160 3 ide_cd_mod,amd74xx,ide_pci_generic
sata_nv 32520 3
8139too 33280 0
mii 10240 2 8139cp,8139too
forcedeth 55820 0
ata_generic 13572 0
libata 166064 2 sata_nv,ata_generic
scsi_mod 170488 3 sd_mod,usb_storage,libata
dock 16288 1 libata
ehci_hcd 40076 0
ohci_hcd 28292 0
thermal 26656 0
processor 49388 1 thermal
fan 10760 0
** PCI devices:
00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller
[10de:005e] (rev a3)
Subsystem: Foxconn International, Inc. Device [105b:0ca4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0050] (rev
a3)
Subsystem: Foxconn International, Inc. Device [105b:0ca4]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2)
Subsystem: Foxconn International, Inc. Device [105b:0ca4]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at fc00 [size=32]
Region 4: I/O ports at 4c00 [size=64]
Region 5: I/O ports at 4c40 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller
[10de:005a] (rev a2) (prog-if 10)
Subsystem: Foxconn International, Inc. Device [105b:0ca4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at dffff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.1 USB Controller [0c03]: nVidia Corporation CK804 USB Controller
[10de:005b] (rev a3) (prog-if 20)
Subsystem: Foxconn International, Inc. Device [105b:0ca4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:04.0 Multimedia audio controller [0401]: nVidia Corporation CK804 AC'97
Audio Controller [10de:0059] (rev a2)
Subsystem: Foxconn International, Inc. Device [105b:0ca4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at f000 [size=256]
Region 1: I/O ports at ec00 [size=256]
Region 2: Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev f2)
(prog-if 8a [Master SecP PriP])
Subsystem: Foxconn International, Inc. Device [105b:0ca4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at e000 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx, ide-pci-generic, ata_generic
00:07.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller
[10de:0054] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Foxconn International, Inc. Device [105b:0ca4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at cc00 [size=16]
Region 5: Memory at dfffb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: ide-pci-generic, sata_nv, ata_generic
00:08.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller
[10de:0055] (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Foxconn International, Inc. Device [105b:0ca4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at b800 [size=16]
Region 5: Memory at dfffa000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: ide-pci-generic, sata_nv, ata_generic
00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev
a2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dfd00000-dfdfffff
Prefetchable memory behind bridge: dfe00000-dfefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057]
(rev a3)
Subsystem: Foxconn International, Inc. Device [105b:0ca4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at dfff9000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b400 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:0d.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d]
(rev a3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: dfc00000-dfcfffff
Prefetchable memory behind bridge: 00000000dfb00000-00000000dfbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d]
(rev a3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: dfa00000-dfafffff
Prefetchable memory behind bridge: 00000000b0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp
01:08.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
[10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ac00 [size=256]
Region 1: Memory at dfdff000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at dfe00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp
03:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV410 [Radeon
X700] [1002:5e4f]
Subsystem: Info-Tek Corp. Device [18bc:0970]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at dfa00000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at 8c00 [size=256]
[virtual] Expansion ROM at c0000000 [disabled] [size=128K]
Capabilities: <access denied>
03:00.1 Display controller [0380]: ATI Technologies Inc Device [1002:5e6f]
Subsystem: Info-Tek Corp. Device [18bc:0971]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at dfa10000 (64-bit, non-prefetchable) [disabled]
[size=64K]
Capabilities: <access denied>
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.25-2-amd64 (SMP w/1 CPU core)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.25-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92e tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.25-2-amd64 recommends no packages.
Versions of packages linux-image-2.6.25-2-amd64 suggests:
ii grub 0.97-41 GRand Unified Bootloader (Legacy v
ii lilo 1:22.8-5 LInux LOader - The Classic OS load
pn linux-doc-2.6.25 <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-2-amd64/preinst/abort-overwrite-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/prerm/removing-running-kernel-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/old-initrd-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/create-kimage-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/failed-to-move-modules-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/preinst/abort-install-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.25-2-amd64/postinst/depmod-error-2.6.25-2-amd64: false
linux-image-2.6.25-2-amd64/postinst/bootloader-test-error-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/postinst/old-system-map-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/prerm/would-invalidate-boot-loader-2.6.25-2-amd64:
true
linux-image-2.6.25-2-amd64/preinst/overwriting-modules-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/depmod-error-initrd-2.6.25-2-amd64: false
linux-image-2.6.25-2-amd64/postinst/old-dir-initrd-link-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/elilo-initrd-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/postinst/bootloader-error-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/preinst/lilo-initrd-2.6.25-2-amd64: true
linux-image-2.6.25-2-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.25-2-amd64/preinst/initrd-2.6.25-2-amd64:
linux-image-2.6.25-2-amd64/preinst/bootloader-initrd-2.6.25-2-amd64: true
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
