Your message dated Tue, 22 Jul 2008 09:02:17 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Re: #490751: linux-image-2.6.25-2-686: proprietary NVIDIA 
module will not install; #481485: nVidia driver fails to compile due to active 
Xen support
has caused the Debian Bug report #490751,
regarding linux-image-2.6.25-2-686: proprietary NVIDIA module will not install
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [EMAIL PROTECTED]
immediately.)


-- 
490751: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=490751
Debian Bug Tracking System
Contact [EMAIL PROTECTED] with problems
--- Begin Message ---
Package: linux-image-2.6.25-2-686
Version: 2.6.25-6
Severity: important


The NVIDIA kernel module package from NVIDIA complains on a non-XEN
kernel (linux-image-2.6.25-2-686) that it cannot run on a XEN kernel.
config shows at least 3 XEN options compiled into a non-XEN kernel.

X is unusable without the NVIDIA kernel module w/ the flat panel screen
I have.


-- Package-specific info:
** Version:
Linux version 2.6.25-2-686 (Debian 2.6.25-6) ([EMAIL PROTECTED]) (gcc version 
4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jun 27 03:23:20 UTC 
2008

** Command line:
auto BOOT_IMAGE=Linux ro root=901

** Not tainted

** Kernel log:
[    5.752544] hiddev96hidraw3: USB HID v1.00 Device [Cypress Semiconductor USB 
to Serial] on usb-0000:00:1d.0-2
[    5.756979] hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
[    5.760363] hda: task_in_intr: error=0x04 { AbortedCommand }
[    5.760363] ide: failed opcode was: 0xec
[    5.764954] usb 1-2: New USB device found, idVendor=0665, idProduct=5161
[    5.768667] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.772370] usb 1-2: Product: USB to Serial
[    5.776366] usb 1-2: Manufacturer: Cypress Semiconductor
[    5.782976] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete 
Error }
[    5.784364] hda: task_no_data_intr: error=0x04 { AbortedCommand }
[    5.784364] ide: failed opcode was: 0xef
[    6.290470] Linux agpgart interface v0.103
[    6.529586] input: Power Button (FF) as /class/input/input3
[    6.564476] ACPI: Power Button (FF) [PWRF]
[    6.568499] input: Power Button (CM) as /class/input/input4
[    6.596469] ACPI: Power Button (CM) [PWRB]
[    7.445265] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> 
IRQ 16
[    7.448493] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[    7.482317] hda_codec: Unknown model for ALC883, trying auto-probe from 
BIOS...
[    7.556055] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 
0x04B8 pid 0x0005
[    7.556515] usbcore: registered new interface driver usblp
[    7.701111] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[    7.704559] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, 
TCOBASE=0x0860)
[    7.708514] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.877193] intel_rng: FWH not detected
[    7.968648] ACPI: PCI Interrupt 0000:04:02.1[A] -> GSI 23 (level, low) -> 
IRQ 23
[    7.972648] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[    8.218576] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> 
IRQ 19
[    8.246889] input: PC Speaker as /class/input/input5
[    8.274976] Real Time Clock Driver v1.12ac
[    8.392824] NET: Registered protocol family 23
[    8.518292] Linux video capture interface: v2.00
[    8.624755] bttv: driver version 0.9.17 loaded
[    8.628592] bttv: using 8 buffers with 2080k (520 pages) each for capture
[    8.632585] bttv: Bt8xx card found (0).
[    8.636554] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 23 (level, low) -> 
IRQ 23
[    8.640553] bttv0: Bt878 (rev 2) at 0000:04:02.0, irq: 23, latency: 32, 
mmio: 0xfaffe000
[    8.649102] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 
0070:13eb
[    8.652566] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[    8.656599] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
[    8.659084] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[    8.693433] tveeprom 1-0050: Hauppauge model 61371, rev B1  , serial# 2034005
[    8.696551] tveeprom 1-0050: tuner model is Philips FM1236 (idx 23, type 2)
[    8.700549] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
[    8.704549] tveeprom 1-0050: audio processor is MSP3430 (idx 7)
[    8.708564] tveeprom 1-0050: has radio
[    8.712550] bttv0: Hauppauge eeprom indicates model#61371
[    8.716550] bttv0: tuner type=2
[    8.720551] bttv0: i2c: checking for MSP34xx @ 0x80... found
[    8.792429] msp3400' 1-0040: MSP3430G-A1 found @ 0x80 (bt878 #0 [sw])
[    8.792560] msp3400' 1-0040: MSP3430G-A1 supports radio, mode is autodetect 
and autoselect
[    8.862302] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[    8.864575] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[    9.066161] tuner' 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
[    9.068599] tuner-simple 1-0061: type set to 2 (Philips NTSC (FI1236,FM1236 
and compatibles))
[    9.081902] bttv0: registered device video0
[    9.084595] bttv0: registered device vbi0
[    9.088594] bttv0: registered device radio0
[    9.111493] bttv0: PLL: 28636363 => 35468950 .. ok
[    9.224579] input: ImExPS/2 Generic Explorer Mouse as /class/input/input6
[    9.253667] parport_pc 00:07: reported by Plug and Play ACPI
[    9.256636] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    9.759197] hda: DMA disabled
[    9.760609] hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error }
[    9.760614] hda: task_in_intr: error=0x04 { AbortedCommand }
[    9.760614] ide: failed opcode was: 0xec
[    9.764614] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete 
Error }
[    9.764614] hda: task_no_data_intr: error=0x04 { AbortedCommand }
[    9.764614] ide: failed opcode was: 0xef
[    9.876621] Adding 9799544k swap on /dev/md3.  Priority:-1 extents:1 
across:9799544k
[   10.156639] EXT3 FS on md1, internal journal
[   11.737549] fuse init (API version 7.9)
[   11.800116] kjournald starting.  Commit interval 5 seconds
[   11.808745] EXT3 FS on md0, internal journal
[   11.808750] EXT3-fs: mounted filesystem with ordered data mode.
[   11.823710] kjournald starting.  Commit interval 5 seconds
[   11.828746] EXT3 FS on md2, internal journal
[   11.828753] EXT3-fs: mounted filesystem with ordered data mode.
[   12.577232] r8169: eth0: link up
[   12.580803] r8169: eth0: link up
[   12.891447] NET: Registered protocol family 10
[   12.893296] lo: Disabled Privacy Extensions
[   13.704874] eth0: no IPv6 routers present
[   17.224382] warning: `named' uses 32-bit capabilities (legacy support in use)
[   25.163453] lp0: using parport0 (interrupt-driven).
[   25.189115] ppdev: user-space parallel port driver
[   32.994120] cdrom: This disc doesn't have any tracks I recognize!
[   33.175538] Bluetooth: Core ver 2.11
[   33.182438] NET: Registered protocol family 31
[   33.186154] Bluetooth: HCI device and connection manager initialized
[   33.190240] Bluetooth: HCI socket layer initialized
[   33.271629] Bluetooth: L2CAP ver 2.9
[   33.274200] Bluetooth: L2CAP socket layer initialized
[   33.306991] Bluetooth: RFCOMM socket layer initialized
[   33.310159] Bluetooth: RFCOMM TTY layer initialized
[   33.314163] Bluetooth: RFCOMM ver 1.8
[   51.859648] tun: Universal TUN/TAP device driver, 1.6
[   51.863373] tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]>
[   51.869217] tun: Disabled Privacy Extensions
[  170.403140] tun: Disabled Privacy Extensions

** Loaded modules:
Module                  Size  Used by
tun                    10976  1 
binfmt_misc            11144  1 
rfcomm                 36368  0 
l2cap                  22784  5 rfcomm
bluetooth              52900  4 rfcomm,l2cap
ppdev                   8676  0 
lp                     11012  0 
video                  19728  0 
output                  3712  1 video
ac                      4448  0 
battery                 8448  0 
ipv6                  241956  37 
fuse                   44348  1 
dm_crypt               14788  0 
crypto_blkcipher       18116  1 dm_crypt
eeprom                  7024  0 
tuner                  32832  0 
tea5767                 6180  1 tuner
tda8290                12356  1 tuner
tda18271               29224  1 tda8290
tda827x                 9732  1 tda8290
tuner_xc2028           17296  1 tuner
xc5000                  9700  1 tuner
tda9887                 8900  1 tuner
tuner_simple            7784  1 tuner
mt20xx                 11080  1 tuner
tea5761                 4868  1 tuner
tvaudio                22232  0 
msp3400                27852  0 
bttv                  157044  0 
irtty_sir               6176  0 
parport_pc             25860  1 
psmouse                35920  0 
videodev               30112  3 tuner,msp3400,bttv
v4l1_compat            12484  1 videodev
firmware_class          9088  3 tuner_xc2028,xc5000,bttv
sir_dev                13764  1 irtty_sir
parport                33868  3 ppdev,lp,parport_pc
ir_common              37028  1 bttv
irda                  106200  1 sir_dev
serio_raw               6532  0 
crc_ccitt               2176  1 irda
compat_ioctl32          1408  1 bttv
i2c_algo_bit            5892  1 bttv
rtc                    14272  0 
pcspkr                  3136  0 
i2c_i801                9520  0 
v4l2_common            10720  4 tuner,tvaudio,msp3400,bttv
videobuf_dma_sg        13028  1 bttv
videobuf_core          17316  2 bttv,videobuf_dma_sg
btcx_risc               4712  1 bttv
tveeprom               14480  1 bttv
snd_bt87x              14820  0 
i2c_core               22548  19 
eeprom,tuner,tea5767,tda8290,tda18271,tda827x,tuner_xc2028,xc5000,tda9887,tuner_simple,mt20xx,tea5761,tvaudio,msp3400,bttv,i2c_algo_bit,i2c_i801,v4l2_common,tveeprom
rng_core                4900  0 
iTCO_wdt               11204  0 
usblp                  13664  0 
snd_hda_intel         309976  7 
snd_pcm_oss            37824  0 
snd_pcm                68228  5 snd_bt87x,snd_hda_intel,snd_pcm_oss
snd_mixer_oss          14880  2 snd_pcm_oss
snd_seq_dummy           3780  0 
snd_seq_oss            28544  0 
button                  8240  0 
snd_seq_midi_event      6976  1 snd_seq_oss
snd_seq                45872  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_timer              21320  4 snd_pcm,snd_seq
snd_seq_device          7564  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd                    48772  17 
snd_bt87x,snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
soundcore               7488  2 snd
snd_page_alloc          9992  3 snd_bt87x,snd_hda_intel,snd_pcm
intel_agp              25084  0 
agpgart                31720  1 intel_agp
joydev                 11328  0 
evdev                  11328  5 
ext3                  120360  3 
jbd                    43444  1 ext3
mbcache                 8260  1 ext3
dm_mirror              25316  0 
dm_snapshot            17444  0 
dm_mod                 55656  3 dm_crypt,dm_mirror,dm_snapshot
raid1                  22176  4 
md_mod                 74556  5 raid1
ide_cd_mod             32864  0 
cdrom                  31872  1 ide_cd_mod
sd_mod                 26072  10 
usbhid                 40192  0 
hid                    36032  1 usbhid
ff_memless              5384  1 usbhid
ide_pci_generic         4228  0 [permanent]
piix                    7176  0 [permanent]
ide_core              100312  3 ide_cd_mod,ide_pci_generic,piix
ata_piix               20196  8 
ata_generic             8004  0 
libata                142288  2 ata_piix,ata_generic
scsi_mod              138668  2 sd_mod,libata
dock                   10448  1 libata
ehci_hcd               32620  0 
uhci_hcd               22352  0 
usbcore               130032  5 usblp,usbhid,ehci_hcd,uhci_hcd
r8169                  28740  0 
thermal                19100  0 
processor              39660  1 thermal
fan                     5636  0 

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller 
Hub [8086:2770] (rev 02)
        Subsystem: ASRock Incorporation Device [1849:2770]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root 
Port [8086:2771] (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Memory behind bridge: fc000000-febfffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [88] Subsystem: Intel Corporation Device [8086:0000]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable+
                Address: fee0100c  Data: 41b9
        Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
                LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s, Latency L0 
<256ns, L1 <4us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surpise-
                        Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Off, PwrInd On, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [140] Root Complex Link <?>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High 
Definition Audio Controller [8086:27d8] (rev 01)
        Subsystem: ASRock Incorporation Device [1849:0888]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fbefc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency 
L0 <64ns, L1 <1us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- 
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [130] Root Complex Link <?>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express 
Port 1 [8086:27d0] (rev 01)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
unlimited, L1 unlimited
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 <1us, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ 
Surpise+
                        Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable+
                Address: fee0100c  Data: 41c1
        Capabilities: [90] Subsystem: ASRock Incorporation Device [1849:27d0]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [180] Root Complex Link <?>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express 
Port 2 [8086:27d2] (rev 01)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fbf00000-fbffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s 
unlimited, L1 unlimited
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported+
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 <256ns, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive+ BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ 
Surpise+
                        Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet+ LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable+
                Address: fee0100c  Data: 41c9
        Capabilities: [90] Subsystem: ASRock Incorporation Device [1849:27d2]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [180] Root Complex Link <?>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #1 [8086:27c8] (rev 01)
        Subsystem: ASRock Incorporation Device [1849:27c8]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 4: I/O ports at d480 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #2 [8086:27c9] (rev 01)
        Subsystem: ASRock Incorporation Device [1849:27c9]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at d800 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #3 [8086:27ca] (rev 01)
        Subsystem: ASRock Incorporation Device [1849:27ca]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at d880 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #4 [8086:27cb] (rev 01)
        Subsystem: ASRock Incorporation Device [1849:27cb]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 16
        Region 4: I/O ports at dc00 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
Controller [8086:27cc] (rev 01) (prog-if 20)
        Subsystem: ASRock Incorporation Device [1849:27cc]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at fbefbc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
e1) (prog-if 01)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
        Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Subsystem: ASRock Incorporation Device [1849:244e]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC 
Interface Bridge [8086:27b8] (rev 01)
        Subsystem: ASRock Incorporation Device [1849:27b8]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel modules: intel-rng, iTCO_wdt

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE 
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
        Subsystem: ASRock Incorporation Device [1849:27df]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at ffa0 [size=16]
        Kernel driver in use: PIIX_IDE
        Kernel modules: piix

00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) 
SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP 
PriO])
        Subsystem: ASRock Incorporation Device [1849:27c0]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 0: I/O ports at d400 [size=8]
        Region 1: I/O ports at d080 [size=4]
        Region 2: I/O ports at d000 [size=8]
        Region 3: I/O ports at cc00 [size=4]
        Region 4: I/O ports at c880 [size=16]
        Capabilities: [70] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ata_piix
        Kernel modules: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller 
[8086:27da] (rev 01)
        Subsystem: ASRock Incorporation Device [1849:27da]
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at 0400 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c-i801

01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E 
PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
        Subsystem: ASRock Incorporation Device [1849:8136]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 220
        Region 0: I/O ports at e800 [size=256]
        Region 2: Memory at fbfff000 (64-bit, non-prefetchable) [size=4K]
        Expansion ROM at fbfc0000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] Vital Product Data <?>
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 
Enable+
                Address: 00000000fee0100c  Data: 41d1
        Capabilities: [60] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, 
L1 unlimited
                        ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 
unlimited, L1 unlimited
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [84] Vendor Specific Information <?>
        Capabilities: [100] Advanced Error Reporting <?>
        Capabilities: [12c] Virtual Channel <?>
        Capabilities: [148] Device Serial Number 36-81-ec-10-00-00-00-00
        Capabilities: [154] Power Budgeting <?>
        Kernel driver in use: r8169
        Kernel modules: r8169

03:00.0 VGA compatible controller [0300]: nVidia Corporation G71 [GeForce 7300 
GS] [10de:01df] (rev a1)
        Subsystem: eVga.com. Corp. Device [3842:c436]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
        Expansion ROM at febe0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [78] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, 
L1 <4us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency 
L0 <256ns, L1 <4us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [128] Power Budgeting <?>
        Kernel modules: nvidiafb

04:02.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video 
Capture [109e:036e] (rev 02)
        Subsystem: Hauppauge computer works Inc. Device [0070:13eb]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (4000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at faffe000 (32-bit, prefetchable) [size=4K]
        Kernel driver in use: bttv
        Kernel modules: bttv

04:02.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture 
[109e:0878] (rev 02)
        Subsystem: Hauppauge computer works Inc. Device [0070:13eb]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (1000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at fafff000 (32-bit, prefetchable) [size=4K]
        Kernel driver in use: Bt87x
        Kernel modules: snd-bt87x



-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (999, 'testing'), (900, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.25-2-686 depends on:
ii  debconf [debconf-2.0]         1.5.22     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92e      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.25-2-686 recommends:
ii  libc6-i686                    2.7-10     GNU C Library: Shared libraries [i

-- debconf information excluded



--- End Message ---
--- Begin Message ---
On Mon, Jul 21, 2008 at 05:40:11PM -0700, Steve Lane wrote:
> It would be great if the XEN options:
> 
> CONFIG_XEN=y
> CONFIG_XEN_BLKDEV_FRONTEND=m
> CONFIG_XEN_NETDEV_FRONTEND=m
> CONFIG_HVC_XEN=y
> 
> were turned off in the Debian stock kernel until there is adequate
> support for installing the Debian NVIDIA packages (nvidia-kernel-source,
> nvidia-kernel-common and nvidia-glx) under testing, given that this is
> now the default testing kernel.

*again*
no we won't turn features down for broken proprietary scripts.

it is a pity that nvidia doesn't produce free xorg drivers
http://www.itp.tuwien.ac.at/~mattems/blog/2008/06/25

just fetch the corresponding unstable drivers, they should install
just fine.

best regards

-- 
maks


--- End Message ---

Reply via email to