--- Begin Message ---
Package: linux-image-2.6.26-rc5-686
Version: 2.6.26~rc5-1~experimental.1~snapshot.11582
Severity: normal
Hi,
I just installed 2.6.26-rc5-686 on my laptop and after booting, when I
login in GDM the system start to do a fuzzy sound (like
interferences).
Sound stops when I kill esd, but that doesn't happen with any other
kernel versions (I can use it on 2.6.25) so I suppose it's something
that came on 2.6.26
The laptop is a Dell Precision M65. I can provide any information you
want as it's easylly reproducible by just running "esd" ;)
Regards,
Marc
-- Package-specific info:
** Version:
Linux version 2.6.26-rc5-686 (Debian
2.6.26~rc5-1~experimental.1~snapshot.11582) ([EMAIL PROTECTED]) (gcc version
4.1.3 20070718 (prerelease) (Debian 4.1.2-14+2)) #1 SMP Mon Jun 9 02:25:46 UTC
2008
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.26-rc5-686 root=/dev/mapper/castor-root ro
** Not tainted
** Kernel log:
[ 17.618136] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 17.807554] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 17.808671] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 17.808787] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 17.923056] intel_rng: FWH not detected
[ 18.194378] input: PC Speaker as /class/input/input7
[ 18.325566] ACPI: PCI interrupt for device 0000:0c:00.0 disabled
[ 18.327157] cannot find the slot for index 0 (range 0-0), error: -16
[ 18.327157] hda-intel: Error creating card!
[ 18.327157] HDA Intel: probe of 0000:00:1b.0 failed with error -12
[ 18.327157] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) ->
IRQ 17
[ 18.328759] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01c8]
[ 18.328861] PCI: Bus 4, cardbus bridge: 0000:03:01.0
[ 18.328928] IO window: 0x00002000-0x000020ff
[ 18.328994] IO window: 0x00002400-0x000024ff
[ 18.329061] PREFETCH window: 0x8c000000-0x8c3fffff
[ 18.329131] MEM window: 0x88000000-0x8bffffff
[ 18.329205] Yenta O2: res at 0x94/0xD4: 00/ea
[ 18.329269] Yenta O2: enabling read prefetch/write burst
[ 18.456131] Yenta: ISA IRQ mask 0x0cb8, PCI irq 19
[ 18.456207] Socket status: 30000006
[ 18.456271] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to
#07
[ 18.456357] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 18.456428] cs: IO port probe 0x2000-0x2fff: clean.
[ 18.456970] pcmcia: parent PCI bridge Memory window: 0xecb00000 - 0xecbfffff
[ 18.477755] input: PS/2 Mouse as /class/input/input8
[ 18.535365] udev: renamed network interface wlan0 to eth2
[ 18.549908] input: AlpsPS/2 ALPS GlidePoint as /class/input/input9
[ 19.076002] cs: IO port probe 0x100-0x3af: clean.
[ 19.077732] cs: IO port probe 0x3e0-0x4ff: clean.
[ 19.078689] cs: IO port probe 0x820-0x8ff: clean.
[ 19.080372] cs: IO port probe 0xc00-0xcf7: excluding 0xcb0-0xcbf
[ 19.080698] cs: IO port probe 0xa00-0xaff: clean.
[ 22.466139] EXT3 FS on dm-1, internal journal
[ 22.826705] loop: module loaded
[ 24.595889] kjournald starting. Commit interval 5 seconds
[ 24.601963] EXT3 FS on sda1, internal journal
[ 24.602078] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.674138] Adding 2715640k swap on /dev/mapper/castor-swap_1. Priority:-1
extents:1 across:2715640k
[ 26.591141] fuse init (API version 7.9)
[ 28.105126] tun: Universal TUN/TAP device driver, 1.6
[ 28.105126] tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]>
[ 29.494015] NET: Registered protocol family 10
[ 29.494769] lo: Disabled Privacy Extensions
[ 40.602649] tap0: no IPv6 routers present
[ 47.237423] warning: `avahi-daemon' uses 32-bit capabilities (legacy support
in use)
[ 47.495180] Bluetooth: Core ver 2.11
[ 47.497423] NET: Registered protocol family 31
[ 47.497492] Bluetooth: HCI device and connection manager initialized
[ 47.497561] Bluetooth: HCI socket layer initialized
[ 47.690783] Bluetooth: L2CAP ver 2.9
[ 47.690783] Bluetooth: L2CAP socket layer initialized
[ 47.816919] Bluetooth: RFCOMM socket layer initialized
[ 47.816919] Bluetooth: RFCOMM TTY layer initialized
[ 47.816919] Bluetooth: RFCOMM ver 1.8
[ 51.220654] lp: driver loaded but no devices found
[ 51.362437] ppdev: user-space parallel port driver
[ 51.386931] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 51.387262] PM: Writing back config space on device 0000:0c:00.0 at offset 1
(was 100102, writing 100106)
[ 51.387558] firmware: requesting iwlwifi-3945-1.ucode
[ 51.680485] iwl3945: Radio disabled by HW RF Kill switch
[ 51.680509] ACPI: PCI interrupt for device 0000:0c:00.0 disabled
[ 53.913304] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 54.435652] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 54.438903] PM: Writing back config space on device 0000:0c:00.0 at offset 1
(was 100102, writing 100106)
[ 54.438903] iwl3945: Radio disabled by HW RF Kill switch
[ 54.438903] ACPI: PCI interrupt for device 0000:0c:00.0 disabled
[ 263.827038] warning: `zsh' uses deprecated v2 capabilities in a way that may
be insecure.
[ 324.378012] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 324.378179] PM: Writing back config space on device 0000:0c:00.0 at offset 1
(was 100102, writing 100106)
[ 324.378476] iwl3945: Radio disabled by HW RF Kill switch
[ 324.378589] ACPI: PCI interrupt for device 0000:0c:00.0 disabled
[ 326.644769] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 351.621700] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on
isa0060/serio0).
[ 351.621700] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
[ 351.929320] usb 1-2.3: new full speed USB device using uhci_hcd and address 5
[ 352.099126] usb 1-2.3: configuration #1 chosen from 1 choice
[ 352.112219] usb 1-2.3: New USB device found, idVendor=413c, idProduct=8103
[ 352.112219] usb 1-2.3: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 352.518864] Bluetooth: HCI USB driver ver 2.9
[ 352.524950] usbcore: registered new interface driver hci_usb
[ 355.403430] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 355.403603] PM: Writing back config space on device 0000:0c:00.0 at offset 1
(was 100102, writing 100106)
[ 355.449386] Registered led device: iwl-phy0:radio
[ 355.449386] Registered led device: iwl-phy0:assoc
[ 355.449386] Registered led device: iwl-phy0:RX
[ 355.449386] Registered led device: iwl-phy0:TX
[ 355.459219] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 408.971715] eth2: Initial auth_alg=1
[ 408.971715] eth2: authenticate with AP 00:1b:11:d2:81:da
[ 408.981988] eth2: RX authentication from 00:1b:11:d2:81:da (alg=1
transaction=2 status=0)
[ 408.981988] eth2: replying to auth challenge
[ 408.986385] eth2: RX authentication from 00:1b:11:d2:81:da (alg=1
transaction=4 status=0)
[ 408.986396] eth2: authenticated
[ 408.986401] eth2: associate with AP 00:1b:11:d2:81:da
[ 408.991262] eth2: RX AssocResp from 00:1b:11:d2:81:da (capab=0x471 status=0
aid=4)
[ 408.991262] eth2: associated
[ 408.991262] eth2: switched to short barker preamble (BSSID=00:1b:11:d2:81:da)
[ 408.995191] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 424.165639] eth2: no IPv6 routers present
** Loaded modules:
Module Size Used by
hci_usb 12252 2
ppdev 6468 0
parport_pc 22500 0
lp 8164 0
parport 30988 3 ppdev,parport_pc,lp
rfcomm 28272 4
l2cap 17248 9 rfcomm
bluetooth 44900 7 hci_usb,rfcomm,l2cap
inet_diag 8392 1
sbs 6688 0
container 3456 0
sbshc 5184 1 sbs
binfmt_misc 7528 1
acpi_cpufreq 6796 1
cpufreq_conservative 5960 0
cpufreq_stats 3776 0
cpufreq_ondemand 6476 1
freq_table 4224 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_userspace 3172 0
cpufreq_powersave 1856 0
ipv6 234980 18
tun 8228 1
fuse 42908 1
kvm_intel 30816 0
kvm 105724 1 kvm_intel
coretemp 5504 0
eeprom 5232 0
firewire_sbp2 12756 0
loop 12748 0
pcmcia 29548 0
arc4 1824 2
ecb 2624 2
snd_pcsp 8576 1
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_hda_intel 321368 0
yenta_socket 20620 1
rsrc_nonstatic 9504 1 yenta_socket
snd_pcm 62628 3 snd_pcsp,snd_pcm_oss,snd_hda_intel
pcmcia_core 31892 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_seq_dummy 2660 0
rng_core 3940 0
psmouse 32336 0
iTCO_wdt 9508 0
serio_raw 4740 0
i2c_i801 7920 0
i2c_core 19828 2 eeprom,i2c_i801
snd_seq_oss 24960 0
iwl3945 79028 0
snd_seq_midi 5728 0
snd_rawmidi 18560 1 snd_seq_midi
firmware_class 6816 2 pcmcia,iwl3945
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
video 16464 0
output 2912 1 video
bay 4096 0
mac80211 139484 1 iwl3945
snd_seq 41456 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
led_class 3908 1 iwl3945
snd_timer 17832 2 snd_pcm,snd_seq
snd_seq_device 6380 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
button 6064 0
wmi 6440 0
ac 3296 0
cfg80211 21384 2 iwl3945,mac80211
battery 6272 0
snd 45636 12
snd_pcsp,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
intel_agp 21532 0
agpgart 28776 1 intel_agp
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
evdev 8000 7
dcdbas 6272 0
joydev 8480 0
ext3 105224 2
jbd 39380 1 ext3
mbcache 7108 1 ext3
sha256_generic 11360 0
aes_i586 7744 2
aes_generic 29256 1 aes_i586
cbc 3264 1
dm_crypt 11108 1
crypto_blkcipher 15140 4 ecb,cbc,dm_crypt
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_snapshot 14340 0
dm_mod 46184 11 dm_crypt,dm_mirror,dm_log,dm_snapshot
sg 26964 0
sr_mod 13316 0
cdrom 30176 1 sr_mod
sd_mod 22200 3
ide_pci_generic 3908 0 [permanent]
ide_core 92532 1 ide_pci_generic
ata_piix 14116 2
ata_generic 4676 0
firewire_ohci 18084 0
firewire_core 31776 2 firewire_sbp2,firewire_ohci
crc_itu_t 2080 1 firewire_core
libata 140128 2 ata_piix,ata_generic
scsi_mod 129100 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
ehci_hcd 28428 0
uhci_hcd 18672 0
usbcore 117872 4 hci_usb,ehci_hcd,uhci_hcd
tg3 84420 0
dock 8240 2 bay,libata
thermal 15164 0
processor 32548 4 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: Dell Device [1028:01c8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: ed000000-efefffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Dell Device [1028:01c8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at efffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: ecf00000-ecffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 [8086:27d4] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: ece00000-ecefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 [8086:27d6] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: ecc00000-ecdfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01c8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01c8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at bf60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01c8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at bf40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01c8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at bf20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01c8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: ecb00000-ecbfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 01)
Subsystem: Dell Device [1028:01c8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-rng, iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
IDE Controller [8086:27c4] (rev 01) (prog-if 80 [Master])
Subsystem: Dell Device [1028:01c8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at bfa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller
[8086:27da] (rev 01)
Subsystem: Dell Device [1028:01c8]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 VGA compatible controller [0300]: nVidia Corporation G72GL [Quadro FX
350M] [10de:01dc] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:01c8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at ed000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ee000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at ef000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: nvidiafb
03:01.0 CardBus bridge [0607]: O2 Micro, Inc. Cardbus bridge [1217:7135] (rev
21)
Subsystem: Dell Device [1028:01c8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ecb00000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 8c000000-8c3ff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
03:01.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394)
[1217:00f7] (rev 02) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01c8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ecbff000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at ecbfe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752
Gigabit Ethernet PCI Express [14e4:1600] (rev 02)
Subsystem: Dell Device [1028:01c8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 218
Region 0: Memory at ecef0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG
Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Device [8086:1021]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 217
Region 0: Memory at ecfff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
Kernel modules: iwl3945
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (900, 'testing'), (500, 'gutsy'), (300, 'unstable'), (150,
'experimental'), (100, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-rc5-686 (SMP w/2 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-rc5-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92b tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-rc5-686 recommends:
ii libc6-i686 2.7-12 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.26-rc5-686/postinst/bootloader-error-2.6.26-rc5-686:
linux-image-2.6.26-rc5-686/prerm/removing-running-kernel-2.6.26-rc5-686: true
linux-image-2.6.26-rc5-686/postinst/bootloader-test-error-2.6.26-rc5-686:
linux-image-2.6.26-rc5-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-rc5-686/preinst/bootloader-initrd-2.6.26-rc5-686: true
linux-image-2.6.26-rc5-686/preinst/failed-to-move-modules-2.6.26-rc5-686:
linux-image-2.6.26-rc5-686/postinst/depmod-error-initrd-2.6.26-rc5-686: false
linux-image-2.6.26-rc5-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-rc5-686/preinst/abort-overwrite-2.6.26-rc5-686:
linux-image-2.6.26-rc5-686/preinst/overwriting-modules-2.6.26-rc5-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-rc5-686/postinst/create-kimage-link-2.6.26-rc5-686: true
linux-image-2.6.26-rc5-686/preinst/abort-install-2.6.26-rc5-686:
linux-image-2.6.26-rc5-686/prerm/would-invalidate-boot-loader-2.6.26-rc5-686:
true
linux-image-2.6.26-rc5-686/preinst/initrd-2.6.26-rc5-686:
linux-image-2.6.26-rc5-686/postinst/old-initrd-link-2.6.26-rc5-686: true
linux-image-2.6.26-rc5-686/postinst/old-system-map-link-2.6.26-rc5-686: true
linux-image-2.6.26-rc5-686/postinst/depmod-error-2.6.26-rc5-686: false
linux-image-2.6.26-rc5-686/preinst/elilo-initrd-2.6.26-rc5-686: true
linux-image-2.6.26-rc5-686/preinst/lilo-initrd-2.6.26-rc5-686: true
linux-image-2.6.26-rc5-686/postinst/old-dir-initrd-link-2.6.26-rc5-686: true
--- End Message ---
