Hello Maximilian, thank you for answering. > how do you suspend?
I just close the lid of the laptop. Just to complete information: [EMAIL PROTECTED]:~$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) > did you try: > echo mem > /sys/power/state I did and the machine went properly in sleep. When I woke it up, this is all I could find in /var/log/messages: May 9 13:47:38 vasquez kernel: [ 186.601919] PM: Syncing filesystems ... done. May 9 13:47:54 vasquez kernel: [ 188.092004] Freezing user space processes ... (elapsed 0.00 seconds) done. May 9 13:47:54 vasquez kernel: [ 188.092813] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. May 9 13:47:54 vasquez kernel: [ 188.092974] Suspending console(s) May 9 13:47:54 vasquez kernel: [ 188.093498] ACPI: PCI interrupt for device 0000:00:02.0 disabled May 9 13:47:54 vasquez kernel: [ 192.182003] sd 0:0:0:0: [sda] Synchronizing SCSI cache May 9 13:47:54 vasquez kernel: [ 192.182122] sd 0:0:0:0: [sda] Stopping disk May 9 13:47:54 vasquez kernel: [ 189.435728] ricoh-mmc: Suspending. May 9 13:47:54 vasquez kernel: [ 189.435755] ricoh-mmc: Controller is now re-enabled. May 9 13:47:54 vasquez kernel: [ 189.435855] ACPI: PCI interrupt for device 0000:06:01.1 disabled May 9 13:47:54 vasquez kernel: [ 189.474817] sky2 eth1: disabling interface May 9 13:47:54 vasquez kernel: [ 189.506943] ACPI: PCI interrupt for device 0000:02:00.0 disabled May 9 13:47:54 vasquez kernel: [ 189.566994] ACPI: PCI interrupt for device 0000:03:00.0 disabled May 9 13:47:54 vasquez kernel: [ 190.104859] ACPI: PCI interrupt for device 0000:00:1d.7 disabled May 9 13:47:54 vasquez kernel: [ 190.281801] ACPI: PCI interrupt for device 0000:00:1d.2 disabled May 9 13:47:54 vasquez kernel: [ 190.281854] ACPI: PCI interrupt for device 0000:00:1d.1 disabled May 9 13:47:54 vasquez kernel: [ 190.281907] ACPI: PCI interrupt for device 0000:00:1d.0 disabled May 9 13:47:54 vasquez kernel: [ 190.491171] ACPI: PCI interrupt for device 0000:00:1b.0 disabled May 9 13:47:54 vasquez kernel: [ 190.667848] ACPI: PCI interrupt for device 0000:00:1a.7 disabled May 9 13:47:54 vasquez kernel: [ 190.758960] ACPI: PCI interrupt for device 0000:00:1a.1 disabled May 9 13:47:54 vasquez kernel: [ 190.758992] ACPI: PCI interrupt for device 0000:00:1a.0 disabled May 9 13:47:54 vasquez kernel: [ 190.762897] ACPI: Preparing to enter system sleep state S3 May 9 13:47:54 vasquez kernel: [ 190.765106] Disabling non-boot CPUs ... May 9 13:47:54 vasquez kernel: [ 190.878894] CPU 1 is now offline May 9 13:47:54 vasquez kernel: [ 190.878900] SMP alternatives: switching to UP code May 9 13:47:54 vasquez kernel: [ 190.882813] CPU1 is down May 9 13:47:54 vasquez kernel: [ 190.882883] Enabling non-boot CPUs ... May 9 13:47:54 vasquez kernel: [ 190.899022] SMP alternatives: switching to SMP code May 9 13:47:54 vasquez kernel: [ 190.900485] Booting processor 1/2 APIC 0x1 May 9 13:47:54 vasquez kernel: [ 194.664936] Initializing CPU#1 May 9 13:47:54 vasquez kernel: [ 194.664936] Calibrating delay using timer specific routine.. 4389.13 BogoMIPS (lpj=8778263) May 9 13:47:54 vasquez kernel: [ 194.664936] CPU: L1 I cache: 32K, L1 D cache: 32K May 9 13:47:54 vasquez kernel: [ 194.664936] CPU: L2 cache: 4096K May 9 13:47:54 vasquez kernel: [ 194.664936] CPU 1/1 -> Node 0 May 9 13:47:54 vasquez kernel: [ 194.664936] CPU: Physical Processor ID: 0 May 9 13:47:54 vasquez kernel: [ 194.664936] CPU: Processor Core ID: 1 May 9 13:47:54 vasquez kernel: [ 194.664936] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a May 9 13:47:54 vasquez kernel: [ 194.664936] CPU1 is up May 9 13:47:54 vasquez kernel: [ 191.057619] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 May 9 13:47:54 vasquez kernel: [ 191.057675] usb usb3: root hub lost power or was reset May 9 13:47:54 vasquez kernel: [ 191.057706] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 May 9 13:47:54 vasquez kernel: [ 191.057758] usb usb4: root hub lost power or was reset May 9 13:47:54 vasquez kernel: [ 191.070907] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 May 9 13:47:54 vasquez kernel: [ 191.086954] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 May 9 13:47:54 vasquez kernel: [ 191.087263] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 May 9 13:47:54 vasquez kernel: [ 191.087314] usb usb5: root hub lost power or was reset May 9 13:47:54 vasquez kernel: [ 191.087332] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 May 9 13:47:54 vasquez kernel: [ 191.087383] usb usb6: root hub lost power or was reset May 9 13:47:54 vasquez kernel: [ 191.087401] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 May 9 13:47:54 vasquez kernel: [ 191.087452] usb usb7: root hub lost power or was reset May 9 13:47:54 vasquez kernel: [ 191.102905] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 May 9 13:47:54 vasquez kernel: [ 191.103077] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 May 9 13:47:54 vasquez kernel: [ 192.139041] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18 May 9 13:47:54 vasquez kernel: [ 192.163084] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19 May 9 13:47:54 vasquez kernel: [ 192.431018] ata2: SATA link down (SStatus 0 SControl 300) May 9 13:47:54 vasquez kernel: [ 192.431042] ata3: SATA link down (SStatus 0 SControl 300) May 9 13:47:54 vasquez kernel: [ 193.183266] sky2 eth1: enabling interface May 9 13:47:54 vasquez kernel: [ 193.295113] ACPI: PCI Interrupt 0000:06:01.1[B] -> GSI 17 (level, low) -> IRQ 17 May 9 13:47:54 vasquez kernel: [ 193.295138] ricoh-mmc: Resuming. May 9 13:47:54 vasquez kernel: [ 193.295153] ricoh-mmc: Controller is now disabled. May 9 13:47:54 vasquez kernel: [ 193.487075] ata4: SATA link down (SStatus 0 SControl 300) May 9 13:47:54 vasquez kernel: [ 193.883091] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 9 13:47:54 vasquez kernel: [ 193.896966] ata1.00: configured for UDMA/100 May 9 13:47:54 vasquez kernel: [ 193.911174] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) May 9 13:47:54 vasquez kernel: [ 193.911213] sd 0:0:0:0: [sda] Write Protect is off May 9 13:47:54 vasquez kernel: [ 193.911282] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 9 13:47:54 vasquez kernel: [ 193.943126] sd 0:0:0:0: [sda] Starting disk May 9 13:47:54 vasquez kernel: [ 194.656742] hda: UDMA/33 mode selected May 9 13:47:54 vasquez kernel: [ 194.672205] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 May 9 13:47:54 vasquez kernel: [ 194.676906] sky2 eth1: Link is up at 100 Mbps, full duplex, flow control rx May 9 13:47:54 vasquez kernel: [ 194.680135] Restarting tasks ... <6>usb 2-6: USB disconnect, address 3 May 9 13:47:54 vasquez kernel: [ 194.873866] done. May 9 13:47:54 vasquez kernel: [ 194.964158] usb 2-6: new high speed USB device using ehci_hcd and address 4 May 9 13:47:54 vasquez kernel: [ 195.115518] usb 2-6: configuration #1 chosen from 1 choice May 9 13:47:54 vasquez kernel: [ 195.116834] usb 2-6: New USB device found, idVendor=05e3, idProduct=0503 May 9 13:47:54 vasquez kernel: [ 195.116842] usb 2-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0 May 9 13:47:54 vasquez kernel: [ 195.116846] usb 2-6: Product: USB 2.0 PC Camera May 9 13:47:54 vasquez kernel: [ 195.116869] usb 3-1: USB disconnect, address 2 May 9 13:47:54 vasquez kernel: [ 195.243471] usb 4-2: USB disconnect, address 2 May 9 13:47:55 vasquez kernel: [ 195.519460] usb 4-2: new low speed USB device using uhci_hcd and address 3 May 9 13:47:55 vasquez kernel: [ 195.760952] usb 4-2: configuration #1 chosen from 1 choice May 9 13:47:55 vasquez kernel: [ 195.779452] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input10 May 9 13:47:55 vasquez kernel: [ 195.838743] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.1-2 May 9 13:47:55 vasquez kernel: [ 195.838856] usb 4-2: New USB device found, idVendor=045e, idProduct=0040 May 9 13:47:55 vasquez kernel: [ 195.838860] usb 4-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 May 9 13:47:55 vasquez kernel: [ 195.838864] usb 4-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) May 9 13:47:55 vasquez kernel: [ 195.838868] usb 4-2: Manufacturer: Microsoft May 9 13:47:55 vasquez kernel: [ 195.838914] usb 7-1: USB disconnect, address 2 May 9 13:47:55 vasquez kernel: [ 196.326301] usb 7-1: new full speed USB device using uhci_hcd and address 3 May 9 13:47:56 vasquez kernel: [ 196.569375] usb 7-1: configuration #1 chosen from 1 choice May 9 13:47:56 vasquez kernel: [ 196.576060] usb 7-1: New USB device found, idVendor=0b05, idProduct=1712 May 9 13:47:56 vasquez kernel: [ 196.576075] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3 May 9 13:47:56 vasquez kernel: [ 196.576083] usb 7-1: SerialNumber: 0194E8-5B-0002 May 9 13:47:56 vasquez kernel: [ 197.057371] usb 3-1: new full speed USB device using uhci_hcd and address 3 May 9 13:47:56 vasquez kernel: [ 197.235641] usb 3-1: configuration #1 chosen from 1 choice May 9 13:47:56 vasquez kernel: [ 201.123983] usb 3-1: New USB device found, idVendor=147e, idProduct=2016 May 9 13:47:56 vasquez kernel: [ 201.123993] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 9 13:47:56 vasquez kernel: [ 201.123997] usb 3-1: Product: Fingerprint Sensor May 9 13:47:56 vasquez kernel: [ 201.124000] usb 3-1: Manufacturer: TouchStrip > if that doesn't work please report upstream in bugzilla.kernel.org > and let us know the bug nr. I will look for similar bugs there and if I can't find anything I'll report back here. Thanks! -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: VINCI UNA CITROEN C1! Scopri il nuovo concorso Best Western, gioca e vinci buoni sconto per i tuoi soggiorni in hotel in palio anche una Citroen C1! Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=7800&d=20080509 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
