Package: linux-image-2.6.25-1-amd64
Version: 2.6.25-1
Severity: normal
After a suspend to ram and a wake up cycle the sound board does not
output any sound.
It worked with linux-image-2.6.24-1-amd64 and does not with
linux-image-2.6.25-1-amd64.
Unloading snd_hda_intel and reloading it makes the sound work again.
Cheers,
--
Arnaud Cornet
-- Package-specific info:
** Version:
Linux version 2.6.25-1-amd64 (Debian 2.6.25-1) ([EMAIL PROTECTED]) (gcc version
4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Fri Apr 25 14:38:55 UTC
2008
** Command line:
root=/dev/mapper/main_vg-root_lv ro vga=791
** Not tainted
** Kernel log:
[ 50.999581] ACPI: Preparing to enter system sleep state S3
[ 51.000063] Disabling non-boot CPUs ...
[ 51.000075] CPU0 attaching NULL sched-domain.
[ 51.000078] CPU1 attaching NULL sched-domain.
[ 51.031252] CPU 1 is now offline
[ 51.031255] SMP alternatives: switching to UP code
[ 51.032479] CPU0 attaching sched-domain:
[ 51.032482] domain 0: span 00000001
[ 51.032483] groups: 00000001
[ 51.032652] CPU1 is down
[ 51.032652] Back to C!
[ 51.033116] Force enabled HPET at resume
[ 51.033163] Enabling non-boot CPUs ...
[ 51.033282] CPU0 attaching NULL sched-domain.
[ 51.043337] SMP alternatives: switching to SMP code
[ 51.044247] Booting processor 1/2 APIC 0x1
[ 41.306597] Initializing CPU#1
[ 41.306597] Calibrating delay using timer specific routine.. 4267.94
BogoMIPS (lpj=8535896)
[ 41.306597] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 41.306597] CPU: L2 cache: 2048K
[ 41.306597] CPU 1/1 -> Node 0
[ 41.306597] CPU: Physical Processor ID: 0
[ 41.306597] CPU: Processor Core ID: 1
[ 41.306597] Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
[ 51.135625] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 51.139328] CPU0 attaching sched-domain:
[ 51.139330] domain 0: span 00000003
[ 51.139332] groups: 00000001 00000002
[ 51.139334] domain 1: span 00000003
[ 51.139335] groups: 00000003
[ 51.139338] CPU1 attaching sched-domain:
[ 51.139339] domain 0: span 00000003
[ 51.139340] groups: 00000002 00000001
[ 51.139342] domain 1: span 00000003
[ 51.139344] groups: 00000003
[ 41.306606] microcode: Could not apply microcode to CPU1: sig=0x6f6, pf=0x1,
rev=0xcb
[ 41.306606] CPU1 is up
[ 41.306606] ACPI: Unable to turn cooling device [ffff81007f361670] 'off'
[ 41.306606] PM: Writing back config space on device 0000:00:02.0 at offset 1
(was 900007, writing 900003)
[ 41.306610] Switched to high resolution mode on CPU 1
[ 41.319677] PM: Writing back config space on device 0000:00:02.1 at offset 4
(was 0, writing fde80000)
[ 41.319682] PM: Writing back config space on device 0000:00:02.1 at offset 1
(was 900000, writing 900006)
[ 41.326631] PM: Writing back config space on device 0000:00:1b.0 at offset f
(was 100, writing 10b)
[ 41.326645] PM: Writing back config space on device 0000:00:1b.0 at offset 4
(was 4, writing fdff8004)
[ 41.326650] PM: Writing back config space on device 0000:00:1b.0 at offset 3
(was 0, writing 10)
[ 41.326655] PM: Writing back config space on device 0000:00:1b.0 at offset 1
(was 100000, writing 100002)
[ 41.326673] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 41.326680] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 41.367058] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) ->
IRQ 23
[ 41.367064] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 41.367094] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 19
[ 41.367099] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 41.367128] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 18
[ 41.367133] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 41.367163] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) ->
IRQ 16
[ 41.367168] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 41.370618] PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
[ 41.370621] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) ->
IRQ 23
[ 41.370627] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 41.370639] PM: Writing back config space on device 0000:00:1d.7 at offset f
(was 100, writing 105)
[ 41.370655] PM: Writing back config space on device 0000:00:1d.7 at offset 4
(was 0, writing fdfff000)
[ 41.370702] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 41.370748] PM: Writing back config space on device 0000:00:1f.1 at offset 8
(was f001, writing fa01)
[ 41.370764] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) ->
IRQ 18
[ 41.374644] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) ->
IRQ 19
[ 41.374649] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 41.410628] PM: Writing back config space on device 0000:01:0b.0 at offset f
(was 1f170100, writing 1f17010f)
[ 41.410648] PM: Writing back config space on device 0000:01:0b.0 at offset 5
(was 1, writing ec01)
[ 41.410652] PM: Writing back config space on device 0000:01:0b.0 at offset 4
(was 0, writing fddf8000)
[ 41.410656] PM: Writing back config space on device 0000:01:0b.0 at offset 3
(was 0, writing 1710)
[ 41.410661] PM: Writing back config space on device 0000:01:0b.0 at offset 1
(was 2b00000, writing 2b00007)
[ 41.410700] skge eth1: enabling interface
[ 41.413997] pnp: Res cnt 2
[ 41.414636] pnp: res cnt 2
[ 41.414637] pnp: Encode io
[ 41.414638] pnp: Encode irq
[ 41.414924] serial 00:07: activated
[ 41.415161] pnp: Res cnt 2
[ 41.415394] pnp: res cnt 2
[ 41.415396] pnp: Encode io
[ 41.415397] pnp: Encode irq
[ 41.415688] parport_pc 00:08: activated
[ 51.212987] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 51.213501] hda: UDMA/33 mode selected
[ 51.213806] sd 0:0:0:0: [sda] Starting disk
[ 44.222981] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[ 44.222984] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[ 44.222987] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 54.023747] ata1.00: configured for UDMA/133
[ 54.027441] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 54.027441] sd 0:0:0:0: [sda] Write Protect is off
[ 54.027441] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 54.027441] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 54.027467] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 54.029764] Restarting tasks ... done.
[ 55.259518] skge eth1: Link is up at 100 Mbps, full duplex, flow control both
[ 65.565823] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 67.115384] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 67.115410] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 67.146129] hda_codec: Unknown model for ALC882, trying auto-probe from
BIOS...
** Loaded modules:
Module Size Used by
snd_hda_intel 414296 1
binfmt_misc 17164 1
i915 37632 1
drm 99112 2 i915
cpufreq_conservative 13320 2
ppdev 13832 0
lp 17540 0
ac 9344 0
battery 14208 0
microcode 17336 0
firmware_class 14976 1 microcode
ipv6 294248 24
nfs 261232 3
lockd 73904 1 nfs
nfs_acl 8192 1 nfs
sunrpc 206984 15 nfs,lockd,nfs_acl
fuse 53440 3
coretemp 13056 0
it87 31256 0
hwmon_vid 7680 1 it87
eeprom 12560 0
acpi_cpufreq 14096 0
freq_table 9728 1 acpi_cpufreq
firewire_sbp2 22808 0
loop 23044 0
snd_pcm_oss 46752 0
snd_mixer_oss 21376 1 snd_pcm_oss
snd_pcm 88072 2 snd_hda_intel,snd_pcm_oss
iTCO_wdt 17360 0
snd_timer 29328 1 snd_pcm
snd 66888 7
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
rng_core 9864 0
intel_agp 34160 1
soundcore 13088 1 snd
button 13856 0
parport_pc 34344 1
i2c_i801 15260 0
snd_page_alloc 15120 2 snd_hda_intel,snd_pcm
parport 44848 3 ppdev,lp,parport_pc
evdev 17408 3
i2c_core 30752 2 eeprom,i2c_i801
pcspkr 7808 0
ext3 139280 3
jbd 55336 1 ext3
mbcache 13956 1 ext3
dm_mirror 31748 0
dm_snapshot 22472 0
dm_mod 68536 10 dm_mirror,dm_snapshot
sd_mod 33728 4
ide_cd_mod 41504 0
cdrom 39464 1 ide_cd_mod
ata_piix 28676 3
usbhid 49632 0
hid 44736 1 usbhid
ff_memless 10248 1 usbhid
ata_generic 13572 0
libata 165808 2 ata_piix,ata_generic
scsi_mod 170360 3 firewire_sbp2,sd_mod,libata
dock 16288 1 libata
piix 12808 0 [permanent]
floppy 66984 0
skge 47248 0
ide_pci_generic 9476 0 [permanent]
ide_core 138160 3 ide_cd_mod,piix,ide_pci_generic
firewire_ohci 27908 0
firewire_core 45920 2 firewire_sbp2,firewire_ohci
crc_itu_t 6656 1 firewire_core
ehci_hcd 40076 0
uhci_hcd 29472 0
thermal 26656 0
processor 49388 2 acpi_cpufreq,thermal
fan 10760 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller
Hub [8086:2770] (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ
Integrated Graphics Controller [8086:2772] (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdf00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ff00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at fdf80000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation 82945G/GZ Integrated
Graphics Controller [8086:2776] (rev 02)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fde80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at fe00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fd00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at fb00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
e1) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge [8086:27b8] (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fa00 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: ide-pci-generic, piix, ata_generic
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family)
SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f900 [size=8]
Region 1: I/O ports at f800 [size=4]
Region 2: I/O ports at f700 [size=8]
Region 3: I/O ports at f600 [size=4]
Region 4: I/O ports at f500 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ide-pci-generic, ata_generic, ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller
[8086:27da] (rev 01)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3093]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:0a.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host
Controller [1106:3044] (rev c0) (prog-if 10)
Subsystem: Elitegroup Computer Systems Device [1019:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at ef00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
01:0b.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:5093]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 23 (5750ns min, 7750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fddf8000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at ec00 [size=256]
Capabilities: <access denied>
Kernel driver in use: skge
Kernel modules: skge
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.25-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.25-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.25-1-amd64 recommends no packages.
-- debconf information:
linux-image-2.6.25-1-amd64/preinst/abort-install-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/preinst/overwriting-modules-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/prerm/removing-running-kernel-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.25-1-amd64/prerm/would-invalidate-boot-loader-2.6.25-1-amd64:
true
linux-image-2.6.25-1-amd64/postinst/bootloader-test-error-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/preinst/abort-overwrite-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/postinst/create-kimage-link-2.6.25-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-1-amd64/postinst/bootloader-error-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/postinst/old-initrd-link-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/postinst/depmod-error-initrd-2.6.25-1-amd64: false
linux-image-2.6.25-1-amd64/preinst/lilo-initrd-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/preinst/bootloader-initrd-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.25-1-amd64/preinst/initrd-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/postinst/depmod-error-2.6.25-1-amd64: false
linux-image-2.6.25-1-amd64/preinst/failed-to-move-modules-2.6.25-1-amd64:
linux-image-2.6.25-1-amd64/postinst/old-system-map-link-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/postinst/old-dir-initrd-link-2.6.25-1-amd64: true
linux-image-2.6.25-1-amd64/preinst/elilo-initrd-2.6.25-1-amd64: true
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
