Package: linux-image-2.6.24-1-686 Version: 2.6.24-5 Severity: critical Justification: breaks the whole system
I first reported the following bug to samba: see https://bugzilla.samba.org/show_bug.cgi?id=5386 This is a copy of what I submitted: I am using GNOME (2.22.0 Debian) and I used the Network Settings GUI to change my IP address from 192.168.0.100 to 192.168.1.100. I do not believe I changed anything else, including the gateway address. I was attempting to communicate with a network device I had connected to my LAN. I was sharing some files with a Windows XP computer on the network. I believe the above was the cause. A few moments later I noticed that the system was very slow and that the hard drive was continually active. Eventually I ran out of space. I noticed that many log files had become very large and I found the following repetitive entries (1000s of them): [2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239) reload_interfaces: No subnets to listen to. Waiting.. [2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239) reload_interfaces: No subnets to listen to. Waiting.. .... .... .... [2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239) reload_interfaces: No subnets to listen to. Waiting.. [2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239) reload_interfaces: No subnets to listen to. Waiting.. [2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239) reload_interfaces: No subnets to listen to. Waiting.. [2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239) reload_interfaces: No subnets to listen to. Waiting.. [2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239) reload_interfaces: No subnets to listen to. Waiting.. [2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239) reload_interfaces: No subnets to listen to. Waiting.. [2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239) reload_interfaces: No subnets to listen to. Waiting.. [2008/04/10 22:04:11, 0] nmbd/nmbd.c:reload_interfaces(239) reload_interfaces: No subnets to listen to. Waiting.. [2008/04/10 22:06:52, 0] nsswitch/winbindd_cache.c:initialize_winbindd_cache(2222) initialize_winbindd_cache: clearing cache and re-creating with version number 1 I hope this helps to find the problem. Some of the log files which were very large were samba.log, daemon.log, syslog, log.nmbd. -------- End of Samba report ---------- What I did not report to samba was the fact that the ext3 drive which was mounted at the root (/) became corrupted. At the end of this report you will see entries from the kernel log for hda6 which is mounted on /home. THese are similar to what I experienced on hda3. I could not start X as the font files were corrupted and I had to reinstall them. I suspect there may be other files which I have yet to find which are corrupted; although all seems to be working for now. When I ran fsck on /dev/hda3 to fix the problems there were 100s of errors similar to the log below. Then after that it began reporting many errors about inode - something to the effect that it was reporting 2, but only finding 1. Sorry, I did not write down the errors. There were 100s and 100s of them (I just kept pressing the space bar) to overwrite. There is a possibility that this was caused by the fact that once the disk began to run out of space because of the log files, I could not get a response from the computer but the disks remained active. I then powered down the machine while it was running. The reason I report this is because I would have assumed that the ext3 system with journaling would have been able to pick up from this type of problem. -- Package-specific info: ** Version: Linux version 2.6.24-1-686 (Debian 2.6.24-5) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Thu Mar 27 17:45:04 UTC 2008 ** Command line: root=/dev/hda3 ro ** Not tainted ** Kernel log: EXT3-fs error (device hda6) in ext3_new_inode: IO failure hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=23595078, sector=23595078 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 23595078 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=294975, block=589830 EXT3-fs error (device hda6) in ext3_reserve_inode_write: IO failure hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=23595078, sector=23595078 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 23595078 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=294976, block=589830 EXT3-fs error (device hda6) in ext3_reserve_inode_write: IO failure EXT3-fs error (device hda6) in ext3_new_inode: IO failure hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=23595078, sector=23595078 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 23595078 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=294976, block=589830 EXT3-fs error (device hda6) in ext3_reserve_inode_write: IO failure hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=34080830, sector=34080830 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 34080830 EXT3-fs error (device hda6): ext3_get_inode_loc: unable to read inode block - inode=950275, block=1900549 ** Loaded modules: Module Size Used by binfmt_misc 11240 1 ppdev 8804 0 lp 11076 0 ipv6 240836 27 xt_limit 2656 8 xt_tcpudp 3136 55 ipt_LOG 5952 8 ipt_MASQUERADE 3776 0 ipt_TOS 2240 5 ipt_REJECT 4480 1 nf_conntrack_irc 6776 0 nf_conntrack_ftp 8896 0 xt_state 2464 6 iptable_nat 6916 0 nf_nat 18316 2 ipt_MASQUERADE,iptable_nat nf_conntrack_ipv4 17352 8 iptable_nat nf_conntrack 62272 7 ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4 iptable_mangle 2784 1 iptable_filter 2976 1 ip_tables 13188 3 iptable_nat,iptable_mangle,iptable_filter x_tables 14244 9 xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,ipt_TOS,ipt_REJECT,xt_state,iptable_nat,ip_tables nls_iso8859_1 4128 1 nls_cp437 5792 1 vfat 12224 1 fat 48764 1 vfat dm_snapshot 16964 0 dm_mirror 21600 0 dm_mod 55812 2 dm_snapshot,dm_mirror psmouse 36464 0 3c509 12148 0 snd_hda_intel 275264 3 snd_pcm_oss 38272 0 snd_pcm 71780 3 snd_hda_intel,snd_pcm_oss snd_mixer_oss 15296 1 snd_pcm_oss snd_seq_dummy 3780 0 snd_seq_oss 29472 0 snd_seq_midi 8160 0 snd_rawmidi 22624 1 snd_seq_midi snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi snd_seq 46544 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 21092 3 snd_pcm,snd_seq snd_seq_device 7820 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 48612 13 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device button 8432 0 soundcore 7552 1 snd parport_pc 33668 1 parport 34280 3 ppdev,lp,parport_pc i2c_nforce2 6464 0 snd_page_alloc 10056 2 snd_hda_intel,snd_pcm i2c_core 22432 1 i2c_nforce2 evdev 11104 3 pcspkr 3200 0 rtc 13052 0 ext3 122888 2 jbd 43732 1 ext3 mbcache 8288 1 ext3 ide_cd 36224 0 cdrom 32512 1 ide_cd ide_disk 15648 5 sata_nv 25000 0 usbhid 28096 1 hid 34272 1 usbhid ata_generic 7428 0 amd74xx 8752 0 [permanent] ehci_hcd 32524 0 ohci_hcd 21988 0 libata 144464 2 sata_nv,ata_generic scsi_mod 141164 1 libata generic 4388 0 [permanent] ide_core 108292 4 ide_cd,ide_disk,amd74xx,generic skge 39184 0 usbcore 132940 5 usbhid,ehci_hcd,ohci_hcd thermal 16028 0 processor 36520 1 thermal fan 4772 0 ** PCI devices: 00:00.0 Host bridge [0600]: nVidia Corporation Unknown device [10de:0070] (rev c1) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8189] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:00.1 RAM memory [0500]: nVidia Corporation Unknown device [10de:007f] (rev a1) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.2 RAM memory [0500]: nVidia Corporation Unknown device [10de:0075] (rev a1) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.3 RAM memory [0500]: nVidia Corporation Unknown device [10de:006f] (rev a1) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.4 RAM memory [0500]: nVidia Corporation Unknown device [10de:00b4] (rev a1) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.0 RAM memory [0500]: nVidia Corporation Unknown device [10de:0076] (rev a1) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.1 RAM memory [0500]: nVidia Corporation Unknown device [10de:0078] (rev a1) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.2 RAM memory [0500]: nVidia Corporation Unknown device [10de:0079] (rev a1) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.3 RAM memory [0500]: nVidia Corporation Unknown device [10de:007a] (rev a1) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.4 RAM memory [0500]: nVidia Corporation Unknown device [10de:007b] (rev a1) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.5 RAM memory [0500]: nVidia Corporation Unknown device [10de:007c] (rev a1) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.6 RAM memory [0500]: nVidia Corporation Unknown device [10de:007d] (rev a1) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:02.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: d0000000-d2ffffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:04.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:05.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:06.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:07.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:007e] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2) Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a2) Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a2) Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at 5000 [size=64] Region 5: I/O ports at 5100 [size=64] Capabilities: <access denied> Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:0a.2 RAM memory [0500]: nVidia Corporation MCP51 Memory Controller 0 [10de:0272] (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81bc] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a2) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at d5006000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a2) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 18 Region 0: Memory at d5007000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at f000 [size=16] Capabilities: <access denied> Kernel driver in use: AMD_IDE Kernel modules: amd74xx 00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 09f0 [size=8] Region 1: I/O ports at 0bf0 [size=4] Region 2: I/O ports at 0970 [size=8] Region 3: I/O ports at 0b70 [size=4] Region 4: I/O ports at d400 [size=16] Region 5: Memory at d5004000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv Kernel modules: sata_nv 00:0f.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0267] (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard [1043:81bc] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at 09e0 [size=8] Region 1: I/O ports at 0be0 [size=4] Region 2: I/O ports at 0960 [size=8] Region 3: I/O ports at 0b60 [size=4] Region 4: I/O ports at e800 [size=16] Region 5: Memory at d5005000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv Kernel modules: sata_nv 00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=128 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: d3000000-d4ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+ BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2) Subsystem: ASUSTeK Computer Inc. Unknown device [1043:818f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 17 Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 7100 GS [10de:016a] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. Unknown device [3842:c412] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at d1000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at d2000000 [disabled] [size=128K] Capabilities: <access denied> Kernel modules: nvidiafb 06:0c.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13) Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (5750ns min, 7750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16K] Region 1: I/O ports at b000 [size=256] Expansion ROM at d3000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: skge Kernel modules: skge -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.24-1-686 (SMP w/2 CPU cores) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.24-1-686 depends on: ii debconf [debconf-2.0] 1.5.20 Debian configuration management sy ii initramfs-tools [linux-initr 0.91e tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo Versions of packages linux-image-2.6.24-1-686 recommends: ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i -- debconf information: linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686: linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk: linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686: linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686: linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686: linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true linux-image-2.6.24-1-686/postinst/kimage-is-a-directory: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
