Package: linux-image-2.6.24-1-686
Version: 2.6.24-4
Severity: normal
For about a year, I've been using a small portable MP3 player which
I synchronize using a mountable VFAT filesystem over USB. During that
time, I've had problems with the free cluster count never being
decreased properly when I delete files (which has the effect of making
the available free space appear to shrink as I add and remove podcasts).
I assumed it was due to buggy firmware, since surely someone would have
noticed this if it was a Linux thing....but I just tested this theory
and in fact it looks like it's Linux that's corrupting the file-system.
Essentially, if I do the sequence of
(1) fsck the device
(2) mount it
(3) transfer files
(4) unmount it
(5) fsck it again
the second fsck will detect a free cluster summary mismatch fairly
reliably:
[EMAIL PROTECTED]:~$ sudo fsck -r /dev/sdd
fsck 1.40.8 (13-Mar-2008)
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Free cluster summary wrong (51586 vs. really 49855)
1) Correct
2) Don't correct
? 1
Perform changes ? (y/n) y
/dev/sdd: 1139 files, 197825/247680 clusters
At this point the device has been continuously connected to the
computer via a USB cable -- I haven't even unplugged it, so that's not a
factor.
I also wonder whether this is related to something else I've noticed:
sometimes podcasts will get corrupted, for instance by bits of other
podcasts being mixed with them. It's as if part of one MP3 file has
been overwritten with another.
JFTR, the device is a Cowon iAUDIO U3.
Daniel
-- Package-specific info:
** Version:
Linux version 2.6.24-1-686 (Debian 2.6.24-4) ([EMAIL PROTECTED]) (gcc version
4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Mon Feb 11 14:37:45 UTC
2008
** Command line:
root=/dev/md1 ro
** Not tainted
** Kernel log:
ppdev: user-space parallel port driver
usb 4-5: new high speed USB device using ehci_hcd and address 7
usb 4-5: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
usb-storage: device scan complete
scsi 7:0:0:0: Direct-Access COWON iAUDIO U3 0100 PQ: 0 ANSI: 0
sd 7:0:0:0: [sdd] 7929856 512-byte hardware sectors (4060 MB)
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 37 00 00 08
sd 7:0:0:0: [sdd] Assuming drive cache: write through
sd 7:0:0:0: [sdd] 7929856 512-byte hardware sectors (4060 MB)
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 37 00 00 08
sd 7:0:0:0: [sdd] Assuming drive cache: write through
sdd:
sd 7:0:0:0: [sdd] Attached SCSI removable disk
Clocksource tsc unstable (delta = -333324006 ns)
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
[drm] Initialized via 2.11.1 20070202 on minor 0
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
ip_tables: (C) 2000-2006 Netfilter Core Team
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will
be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will
be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will
be case sensitive!
usb 4-5: USB disconnect, address 7
usb 4-5: new high speed USB device using ehci_hcd and address 8
usb 4-5: device not accepting address 8, error -71
usb 4-5: new high speed USB device using ehci_hcd and address 10
usb 4-5: configuration #1 chosen from 1 choice
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 10
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 8:0:0:0: Direct-Access COWON iAUDIO U3 0100 PQ: 0 ANSI: 0
sd 8:0:0:0: [sdd] 7929856 512-byte hardware sectors (4060 MB)
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 37 00 00 08
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sd 8:0:0:0: [sdd] 7929856 512-byte hardware sectors (4060 MB)
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 37 00 00 08
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sdd:
sd 8:0:0:0: [sdd] Attached SCSI removable disk
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will
be case sensitive!
usb 4-5: USB disconnect, address 10
usb 4-5: new high speed USB device using ehci_hcd and address 11
usb 4-5: configuration #1 chosen from 1 choice
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 11
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 9:0:0:0: Direct-Access COWON iAUDIO U3 0100 PQ: 0 ANSI: 0
sd 9:0:0:0: [sdd] 7929856 512-byte hardware sectors (4060 MB)
sd 9:0:0:0: [sdd] Write Protect is off
sd 9:0:0:0: [sdd] Mode Sense: 37 00 00 08
sd 9:0:0:0: [sdd] Assuming drive cache: write through
sd 9:0:0:0: [sdd] 7929856 512-byte hardware sectors (4060 MB)
sd 9:0:0:0: [sdd] Write Protect is off
sd 9:0:0:0: [sdd] Mode Sense: 37 00 00 08
sd 9:0:0:0: [sdd] Assuming drive cache: write through
sdd:
sd 9:0:0:0: [sdd] Attached SCSI removable disk
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will
be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will
be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will
be case sensitive!
usb 4-5: USB disconnect, address 11
usb 4-5: new high speed USB device using ehci_hcd and address 12
usb 4-5: configuration #1 chosen from 1 choice
scsi10 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 12
usb-storage: waiting for device to settle before scanning
usb 4-5: USB disconnect, address 12
usb 4-5: new high speed USB device using ehci_hcd and address 13
usb 4-5: configuration #1 chosen from 1 choice
scsi11 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 13
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 11:0:0:0: Direct-Access COWON iAUDIO U3 0100 PQ: 0 ANSI: 0
sd 11:0:0:0: [sdd] 7929856 512-byte hardware sectors (4060 MB)
sd 11:0:0:0: [sdd] Write Protect is off
sd 11:0:0:0: [sdd] Mode Sense: 37 00 00 08
sd 11:0:0:0: [sdd] Assuming drive cache: write through
sd 11:0:0:0: [sdd] 7929856 512-byte hardware sectors (4060 MB)
sd 11:0:0:0: [sdd] Write Protect is off
sd 11:0:0:0: [sdd] Mode Sense: 37 00 00 08
sd 11:0:0:0: [sdd] Assuming drive cache: write through
sdd:
sd 11:0:0:0: [sdd] Attached SCSI removable disk
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will
be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will
be case sensitive!
** Loaded modules:
Module Size Used by
nls_utf8 2080 0
nls_cp437 5792 0
vfat 12224 0
fat 48764 1 vfat
xt_multiport 3040 1
iptable_filter 2976 1
ip_tables 13188 1 iptable_filter
x_tables 14244 2 xt_multiport,ip_tables
via 38976 2
drm 74132 3 via
binfmt_misc 11240 1
cpufreq_userspace 4260 1
nfsd 203984 13
auth_rpcgss 39744 1 nfsd
exportfs 4736 1 nfsd
ppdev 8804 0
parport_pc 33668 0
lp 11076 0
parport 34280 3 ppdev,parport_pc,lp
ac 6116 0
battery 13572 0
nfs 228168 0
lockd 60744 3 nfsd,nfs
nfs_acl 3520 2 nfsd,nfs
sunrpc 170780 11 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
ipv6 240772 24
w83627hf 20756 0
hwmon_vid 3040 1 w83627hf
eeprom 7184 0
acpi_cpufreq 9260 0
freq_table 4512 1 acpi_cpufreq
firewire_sbp2 14252 0
loop 16804 0
snd_via82xx 26840 1
gameport 14472 1 snd_via82xx
snd_ac97_codec 92932 1 snd_via82xx
ac97_bus 2176 1 snd_ac97_codec
snd_mpu401_uart 8000 1 snd_via82xx
snd_pcm_oss 38272 0
snd_pcm 71780 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 10056 2 snd_via82xx,snd_pcm
snd_mixer_oss 15296 2 snd_pcm_oss
snd_seq_dummy 3780 0
snd_seq_oss 29472 0
snd_seq_midi 8160 0
snd_rawmidi 22624 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 6976 2 snd_seq_oss,snd_seq_midi
pcspkr 3200 0
snd_seq 46544 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
rtc 13052 0
snd_timer 21092 2 snd_pcm,snd_seq
snd_seq_device 7820 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 48612 11
snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 7552 2 snd
button 8432 0
i2c_viapro 8372 0
i2c_core 22432 2 eeprom,i2c_viapro
shpchp 31028 0
pci_hotplug 27712 1 shpchp
via_agp 9952 1
agpgart 31688 2 drm,via_agp
evdev 11104 5
ext3 122920 2
jbd 43732 1 ext3
mbcache 8288 1 ext3
dm_mirror 21600 0
dm_snapshot 16964 0
dm_mod 55812 10 dm_mirror,dm_snapshot
raid456 122128 1
async_xor 2752 1 raid456
async_memcpy 2016 1 raid456
async_tx 2560 1 raid456
xor 14344 2 raid456,async_xor
raid1 22240 1
md_mod 73716 4 raid456,raid1
ide_cd 36224 0
cdrom 32512 1 ide_cd
generic 4388 0 [permanent]
usbhid 28096 0
hid 34272 1 usbhid
sd_mod 27104 9
usb_storage 77504 0
via82cxxx 7940 0 [permanent]
ide_core 108292 3 ide_cd,generic,via82cxxx
sata_via 11492 0
sata_promise 12996 9
ata_generic 7428 0
ehci_hcd 32524 0
uhci_hcd 23376 0
libata 144464 3 sata_via,sata_promise,ata_generic
usbcore 132940 5 usbhid,usb_storage,ehci_hcd,uhci_hcd
scsi_mod 141196 4 firewire_sbp2,sd_mod,usb_storage,libata
via_velocity 29476 0
crc_ccitt 2176 1 via_velocity
firewire_ohci 17760 0
firewire_core 39232 2 firewire_sbp2,firewire_ohci
crc_itu_t 2176 1 firewire_core
thermal 16028 0
processor 36520 3 acpi_cpufreq,thermal
fan 4772 0
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro
Host Bridge [1106:0314]
Subsystem: VIA Technologies, Inc. Unknown device [1106:aa08]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 8
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro
Host Bridge [1106:1314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro
Host Bridge [1106:2314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 Host bridge [0600]: VIA Technologies, Inc. PT890 Host Bridge [1106:3208]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: via-agp
00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro
Host Bridge [1106:4314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro
Host Bridge [1106:7314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI Bridge [1106:b198]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fb000000-fcffffff
Prefetchable memory behind bridge: f4000000-f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR+ <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:0d.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host
Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at fc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
00:0e.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6120/VT6121/VT6122
Gigabit Ethernet Adapter [1106:3119] (rev 11)
Subsystem: VIA Technologies, Inc. Unknown device [1106:0110]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at f800 [size=256]
Region 1: Memory at fdffe000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-velocity
Kernel modules: via-velocity
00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID
Controller [1106:3149] (rev 80)
Subsystem: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller
[1106:3149]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f400 [size=8]
Region 1: I/O ports at f000 [size=4]
Region 2: I/O ports at ec00 [size=8]
Region 3: I/O ports at e800 [size=4]
Region 4: I/O ports at e400 [size=16]
Region 5: I/O ports at e000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sata_via
Kernel modules: sata_via
00:0f.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at dc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 4: I/O ports at d400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
86) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South] [1106:3227]
Subsystem: VIA Technologies, Inc. Unknown device [1106:aa08]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: i2c-viapro
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
Subsystem: VIA Technologies, Inc. Unknown device [1106:aa08]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at c800 [size=256]
Capabilities: <access denied>
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx
00:14.0 Mass storage controller [0180]: Promise Technology, Inc. PDC40718 (SATA
300 TX4) [105a:3d17] (rev 02)
Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4) [105a:3d17]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at c000 [size=128]
Region 2: I/O ports at bc00 [size=256]
Region 3: Memory at fdffc000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fdfc0000 (32-bit, non-prefetchable) [size=128K]
[virtual] Expansion ROM at 40000000 [disabled] [size=32K]
Capabilities: <access denied>
Kernel driver in use: sata_promise
Kernel modules: sata_promise
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. UniChrome Pro
IGP [1106:3344] (rev 01) (prog-if 00 [VGA controller])
Subsystem: VIA Technologies, Inc. UniChrome Pro IGP [1106:3344]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fc000000 [disabled] [size=64K]
Capabilities: <access denied>
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-686 depends on:
ii debconf [debconf-2.0] 1.5.20 Debian configuration management sy
ii initramfs-tools [linux-initr 0.91e tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.24-1-686 recommends:
ii libc6-i686 2.7-6 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
