Package: linux-image-2.6.24-1-686 Version: 2.6.24-5~snapshot.10625 Severity: important
Mixer is wrong for ALC262 in HP t5735. Resolved in alsa-driver-1.0.16 and<ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.16.tar.bz>patched in ftp://ftp.kernel.org/pub/linux/kernel/v2.6/snapshots/patch-2.6.24-git22.gz. Thanks! -- Package-specific info: ** Version: Linux version 2.6.24-1-686 (Debian 2.6.24-5~snapshot.10625) ( [EMAIL PROTECTED]) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14+2)) #1 SMP Sat Feb 23 01:32:48 UTC 2008 ** Command line: root=/dev/hda1 ro quiet splash vga=788 ** Not tainted ** Kernel log: hub 1-0:1.0: 2 ports detected SCSI subsystem initialized snd_hda_intel: Unknown symbol snd_ctl_add snd_hda_intel: Unknown symbol snd_pcm_new snd_hda_intel: Unknown symbol snd_pcm_limit_hw_rates snd_hda_intel: Unknown symbol snd_card_register snd_hda_intel: Unknown symbol snd_card_free snd_hda_intel: Unknown symbol snd_pcm_lib_preallocate_pages_for_all snd_hda_intel: Unknown symbol snd_card_proc_new snd_hda_intel: Unknown symbol snd_ctl_find_id snd_hda_intel: Unknown symbol snd_ctl_new1 snd_hda_intel: Unknown symbol snd_component_add snd_hda_intel: Unknown symbol snd_card_new snd_hda_intel: Unknown symbol snd_iprintf snd_hda_intel: Unknown symbol snd_pcm_lib_malloc_pages snd_hda_intel: Unknown symbol snd_ctl_boolean_mono_info snd_hda_intel: Unknown symbol snd_pcm_lib_ioctl snd_hda_intel: Unknown symbol snd_pcm_lib_free_pages snd_hda_intel: Unknown symbol snd_pcm_set_ops snd_hda_intel: Unknown symbol snd_pcm_hw_constraint_list snd_hda_intel: Unknown symbol snd_device_new snd_hda_intel: Unknown symbol snd_pcm_suspend_all snd_hda_intel: Unknown symbol snd_card_disconnect snd_hda_intel: Unknown symbol snd_pcm_hw_constraint_integer snd_hda_intel: Unknown symbol snd_pci_quirk_lookup snd_hda_intel: Unknown symbol snd_pcm_period_elapsed snd_hda_intel: Unknown symbol snd_pcm_hw_constraint_step snd_hda_intel: Unknown symbol snd_pcm_format_width libata version 3.00 loaded. ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02e000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02d000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02c000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02b000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe02a000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 10 ports detected piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00: 14.1 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 SB600_PATA: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfe00-0xfe07, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: 1024MB ATA Flash Disk, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: MWDMA2 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 2001888 sectors (1024 MB) w/1KiB Cache, CHS=1986/16/63 hda: cache flushes not supported hda: hda1 hda2 input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] input: PC Speaker as /class/input/input3 ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 hda_codec: Unknown model for ALC262, trying auto-probe from BIOS... input: ImPS/2 Logitech Wheel Mouse as /class/input/input4 lp: driver loaded but no devices found Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED] tg3: eth0: Link is up at 100 Mbps, half duplex. tg3: eth0: Flow control is off for TX and off for RX. tg3: eth0: Link is up at 100 Mbps, half duplex. tg3: eth0: Flow control is off for TX and off for RX. ** Loaded modules: Module Size Used by ac 6116 0 battery 13572 0 dm_snapshot 16964 0 dm_mirror 21600 0 dm_mod 55812 2 dm_snapshot,dm_mirror usb_storage 77536 0 parport_pc 33668 0 lp 11076 0 parport 34280 2 parport_pc,lp snd_hda_intel 275264 0 snd_pcm_oss 38272 0 snd_mixer_oss 15296 1 snd_pcm_oss psmouse 36464 0 snd_pcm 71780 2 snd_hda_intel,snd_pcm_oss snd_timer 21124 1 snd_pcm serio_raw 6660 0 pcspkr 3200 0 snd 48612 5 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 7552 1 snd button 8432 0 evdev 11104 1 joydev 11360 0 ext2 65608 2 mbcache 8288 1 ext2 ide_disk 15648 3 generic 4388 0 [permanent] atiixp 4592 0 [permanent] ide_core 108292 3 ide_disk,generic,atiixp ata_generic 7428 0 k8temp 5536 0 libata 144464 1 ata_generic scsi_mod 141196 2 usb_storage,libata i2c_piix4 8428 0 i2c_core 22432 1 i2c_piix4 ehci_hcd 32524 0 snd_page_alloc 10056 2 snd_hda_intel,snd_pcm ohci_hcd 21988 0 usbcore 132940 4 usb_storage,ehci_hcd,ohci_hcd tg3 88996 0 shpchp 31028 0 pci_hotplug 27680 1 shpchp ati_agp 8684 0 agpgart 31720 1 ati_agp thermal 16028 0 processor 36552 1 thermal fan 4772 0 genrtc 9000 0 ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc Unknown device [1002:7910] Subsystem: ATI Technologies Inc Unknown device [1002:7910] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 00:01.0 PCI bridge [0604]: ATI Technologies Inc Unknown device [1002:7912] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 99 Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fdc00000-fddfffff Prefetchable memory behind bridge: 00000000fa000000-00000000fbffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:04.0 PCI bridge [0604]: ATI Technologies Inc Unknown device [1002:7914] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K] 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 00:14.0 SMBus [0c05]: ATI Technologies Inc SB600 SMBus [1002:4385] (rev 14) Subsystem: ATI Technologies Inc SB600 SMBus [1002:4385] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: I/O ports at 0b00 [size=16] Capabilities: <access denied> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: ATI Technologies Inc SB600 IDE [1002:438c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at fe00 [size=16] 00:14.2 Audio device [0403]: ATI Technologies Inc SB600 Azalia [1002:4383] Subsystem: Hewlett-Packard Company Unknown device [103c:302f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fe024000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SB600 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: fda00000-fdafffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Unknown device [1002:791f] (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company Unknown device [103c:302b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at fa000000 (64-bit, prefetchable) [size=32M] Region 2: Memory at fddf0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at ee00 [size=256] Region 5: Memory at fdc00000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02) Subsystem: Broadcom Corporation Unknown device [14e4:9693] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 222 Region 0: Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> -- System Information: Debian Release: 4.0 APT prefers proposed-updates APT policy: (500, 'proposed-updates'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.24-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages linux-image-2.6.24-1-686 depends on: ii debconf [debconf-2.0] 1.5.11etch1 Debian configuration management sy ii initramfs-tools [linux-initr 0.85h tools for generating an initramfs ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.24-1-686 recommends: ii libc6-i686 2.3.6.ds1-13etch5 GNU C Library: Shared libraries [i
