Hi Martin, thank you very much for looking into my problem.
> Could you try to upgrade to the 2.6.24 kernel from sid? Basically, I > recommend you first make a backup of your flash content so you can go > back to your current kernel in case the upgrade to 2.6.24 fails. Do: > cat /dev/mtdblock? > backup > and save the file somewhere. > > Then upgrade to 2.6.24: > wget > http://ftp.de.debian.org/debian/pool/main/l/linux-2.6/linux-image-2.6.22-3-ixp4xx_2.6.22-6_arm.deb > sudo dpkg -i linux-image-2.6.22-3-ixp4xx_2.6.22-6_arm.deb > reboot I'll be happy to try that, but since I am not familiar with Debian, could you please answer a few questions beforehand: 1) Does the kernel you recommend contain all the necessary hardware drivers/microcode for the NSLU2? I remember there being a problem with the current etch distribution requiring to use an "unofficial" image containing proprietary Intel microcode. 2) Could there be problems with upgrading packages in my etch-based system via apt when I have such a mixed installation? 3) How do I reverse the upgrade, i.e. install the backup of the flash content in case there are problems? Regards, Richard Spitz -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
