Package: linux-image-2.6.24-1-686 Version: 2.6.24-2 Severity: normal Ever since I resumed my laptop from sleep this morning, /sys/class/power_supply/CMB1 has had nonsensical values for *_now:
[EMAIL PROTECTED]:/sys/class/power_supply/CMB1>cat charge_now
0
[EMAIL PROTECTED]:/sys/class/power_supply/CMB1>cat current_now
0
[EMAIL PROTECTED]:/sys/class/power_supply/CMB1>cat voltage_now
0
I tried removing and reloading the battery module, didn't help.
I don't think my laptop is running on an empty battety, since it charged
all night, and since the low battery LED is not on. I also doubt that it's
using 0 volts.
I never had this kind of trouble out of /proc/acpi, and /sys/class/power_supply/
had been working accurately for a couple of days before this happened.
Rest of the info seems ok:
[EMAIL PROTECTED]:/sys/class/power_supply/CMB1>cat charge_full
7800000
[EMAIL PROTECTED]:/sys/class/power_supply/CMB1>cat voltage_min_design
7200000
[EMAIL PROTECTED]:/sys/class/power_supply/CMB1>cat manufacturer
Fujitsu
[EMAIL PROTECTED]:/sys/class/power_supply/CMB1>cat model_name
CP234020
[EMAIL PROTECTED]:/sys/class/power_supply/CMB1>cat present
1
[EMAIL PROTECTED]:/sys/class/power_supply/CMB1>cat status
Discharging
[EMAIL PROTECTED]:/sys/class/power_supply/CMB1>cat technology
Li-ion
[EMAIL PROTECTED]:/sys/class/power_supply/CMB1>cat type
Battery
-- Package-specific info:
** Version:
Linux version 2.6.24-1-686 (Debian 2.6.24-2) ([EMAIL PROTECTED]) (gcc version
4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Thu Jan 31 20:35:50 UTC
2008
** Command line:
root=/dev/mapper/kodama-root ro acpi_sleep=s3_bios splash
** Not tainted
** Kernel log:
ACPI handle has no context!
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.3 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
Disabling non-boot CPUs ...
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Back to C!
Force enabled HPET at resume
PM: Writing back config space on device 0000:00:02.0 at offset f (was 100,
writing 10b)
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PM: Writing back config space on device 0000:00:02.1 at offset 4 (was 0,
writing 30000000)
PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0,
writing 8)
PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006,
writing 100002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
usb usb1: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
usb usb2: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
usb usb3: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
usb usb4: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PM: Writing back config space on device 0000:00:1e.0 at offset f (was 40000,
writing 400ff)
PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001,
writing 1fff1)
PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0,
writing b010b010)
PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000,
writing 22802020)
PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20070600,
writing 200a0600)
PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100004,
writing 100107)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.2 to 64
PM: Writing back config space on device 0000:06:03.0 at offset f (was 7000100,
writing 580010b)
PM: Writing back config space on device 0000:06:03.0 at offset e (was 0,
writing 28fc)
PM: Writing back config space on device 0000:06:03.0 at offset d (was 0,
writing 2800)
PM: Writing back config space on device 0000:06:03.0 at offset c (was 0,
writing 24fc)
PM: Writing back config space on device 0000:06:03.0 at offset b (was 0,
writing 2400)
PM: Writing back config space on device 0000:06:03.0 at offset a (was 0,
writing 3bfff000)
PM: Writing back config space on device 0000:06:03.0 at offset 9 (was 0,
writing 38000000)
PM: Writing back config space on device 0000:06:03.0 at offset 8 (was 0,
writing 37fff000)
PM: Writing back config space on device 0000:06:03.0 at offset 7 (was 0,
writing 34000000)
PM: Writing back config space on device 0000:06:03.0 at offset 6 (was 0,
writing b00a0706)
PM: Writing back config space on device 0000:06:03.0 at offset 4 (was 0,
writing b0103000)
PM: Writing back config space on device 0000:06:03.0 at offset 3 (was 820000,
writing 82a800)
PM: Writing back config space on device 0000:06:03.0 at offset 1 (was 2100000,
writing 2100007)
PM: Writing back config space on device 0000:06:03.1 at offset 4 (was 0,
writing b0100000)
PM: Writing back config space on device 0000:06:03.1 at offset 3 (was 800000,
writing 802000)
PM: Writing back config space on device 0000:06:03.1 at offset 1 (was 2100000,
writing 2100106)
PM: Writing back config space on device 0000:06:03.2 at offset 4 (was 0,
writing b0100800)
PM: Writing back config space on device 0000:06:03.2 at offset 3 (was 800000,
writing 802000)
PM: Writing back config space on device 0000:06:03.2 at offset 1 (was 2100000,
writing 2100106)
ACPI: PCI Interrupt 0000:06:03.2[A] -> GSI 16 (level, low) -> IRQ 16
PM: Writing back config space on device 0000:06:03.3 at offset 4 (was 0,
writing b0100c00)
PM: Writing back config space on device 0000:06:03.3 at offset 1 (was 2100000,
writing 2100102)
PM: Writing back config space on device 0000:06:03.4 at offset 4 (was 0,
writing b0101000)
PM: Writing back config space on device 0000:06:03.4 at offset 1 (was 2100000,
writing 2100102)
PM: Writing back config space on device 0000:06:04.0 at offset 5 (was 0,
writing b0101400)
PM: Writing back config space on device 0000:06:04.0 at offset 4 (was 1,
writing 2001)
PM: Writing back config space on device 0000:06:04.0 at offset 3 (was 0,
writing 2000)
PM: Writing back config space on device 0000:06:04.0 at offset 1 (was 2900000,
writing 2900107)
eth0: link down
wlan0: Coming out of suspend...
PCI: Enabling device 0000:06:05.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 18 (level, low) -> IRQ 19
PM: Writing back config space on device 0000:06:05.0 at offset f (was 18030100,
writing 1803010b)
PM: Writing back config space on device 0000:06:05.0 at offset 4 (was 0,
writing b0102000)
PM: Writing back config space on device 0000:06:05.0 at offset 3 (was 0,
writing 2008)
PM: Writing back config space on device 0000:06:05.0 at offset 1 (was 2900002,
writing 2900116)
i8042 kbd 00:07: activation failed
i8042 aux 00:08: activation failed
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 0)
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Restarting tasks ... <6>usb 3-1: USB disconnect, address 2
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
done.
usb 4-2: USB disconnect, address 2
ata1.00: configured for UDMA/33
usb 3-1: new full speed USB device using uhci_hcd and address 3
usb 3-1: configuration #1 chosen from 1 choice
usb 4-2: new full speed USB device using uhci_hcd and address 3
usb 4-2: configuration #1 chosen from 1 choice
tun0: Disabled Privacy Extensions
ACPI: Battery Slot [CMB1] (battery present)
ACPI: Battery Slot [CMB2] (battery absent)
** Loaded modules:
Module Size Used by
battery 8640 0
i915 22048 2
drm 74036 3 i915
rfcomm 36784 2
l2cap 22880 9 rfcomm
tun 10976 1
ppdev 8804 0
parport_pc 33668 0
lp 11076 0
parport 34280 3 ppdev,parport_pc,lp
acpi_cpufreq 9260 0
cpufreq_stats 5184 0
cpufreq_conservative 7560 0
cpufreq_powersave 1856 0
cpufreq_ondemand 8492 1
cpufreq_userspace 4260 0
freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
ipv6 240772 30
nfs 228168 6
lockd 60744 2 nfs
nfs_acl 3520 1 nfs
sunrpc 170780 24 nfs,lockd,nfs_acl
joydev 11360 0
pcmcia 37036 0
ipw2200 134568 0
ieee80211 31048 1 ipw2200
ieee80211_crypt 5888 1 ieee80211
sdhci 16836 0
firmware_class 9408 2 pcmcia,ipw2200
mmc_core 47300 1 sdhci
yenta_socket 24844 1
rsrc_nonstatic 11872 1 yenta_socket
pcmcia_core 36884 3 pcmcia,yenta_socket,rsrc_nonstatic
rtc 13052 0
serio_raw 6660 0
pcspkr 3200 0
psmouse 36464 0
i2c_i801 9232 0
iTCO_wdt 11268 0
i2c_core 22432 1 i2c_i801
hci_usb 14780 2
bluetooth 53220 7 rfcomm,l2cap,hci_usb
snd_hda_intel 275264 2
video 18672 0
output 3744 1 video
snd_pcm_oss 38272 0
snd_mixer_oss 15296 2 snd_pcm_oss
snd_pcm 71780 2 snd_hda_intel,snd_pcm_oss
snd_timer 21092 1 snd_pcm
ac 4544 0
button 8432 0
snd 48612 7
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
intel_agp 23412 1
soundcore 7552 2 snd
agpgart 31688 3 drm,intel_agp
snd_page_alloc 10056 2 snd_hda_intel,snd_pcm
evdev 11104 6
ext3 122920 2
jbd 43732 1 ext3
mbcache 8288 1 ext3
sha256_generic 11040 0
aes_i586 33376 2
aes_generic 27776 0
geode_aes 6024 0
cbc 4416 1
blkcipher 6724 2 geode_aes,cbc
dm_crypt 13220 1
dm_mirror 21600 0
dm_snapshot 16964 0
dm_mod 55812 10 dm_crypt,dm_mirror,dm_snapshot
sg 33264 0
sr_mod 16708 0
cdrom 32512 1 sr_mod
ide_disk 15648 3
ata_piix 17092 0
8139cp 21856 0
ata_generic 7428 0
ahci 26116 0
libata 144464 3 ata_piix,ata_generic,ahci
scsi_mod 141196 3 sg,sr_mod,libata
8139too 25600 0
mii 5312 2 8139cp,8139too
firewire_ohci 17760 0
firewire_core 39232 1 firewire_ohci
crc_itu_t 2176 1 firewire_core
generic 4388 0 [permanent]
piix 7492 0 [permanent]
ide_core 108292 3 ide_disk,generic,piix
ehci_hcd 32524 0
uhci_hcd 23376 0
usbcore 132940 4 hci_usb,ehci_hcd,uhci_hcd
thermal 16028 0
processor 36520 3 acpi_cpufreq,thermal
fan 4772 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML
Express Processor to DRAM Controller [8086:2590] (rev 04)
Subsystem: Fujitsu Limited. Unknown device [10cf:12d7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00
[VGA controller])
Subsystem: Fujitsu Limited. Unknown device [10cf:12e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1400 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at b0040000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML
Express Graphics Controller [8086:2792] (rev 04)
Subsystem: Fujitsu Limited. Unknown device [10cf:12e2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at 30000000 (32-bit, non-prefetchable) [disabled]
[size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: Fujitsu Limited. Unknown device [10cf:1326]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Unknown device [10cf:12e8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 4: I/O ports at 1420 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Unknown device [10cf:12e8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at 1440 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Unknown device [10cf:12e8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 1460 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Unknown device [10cf:12e8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1480 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
Subsystem: Fujitsu Limited. Unknown device [10cf:12e9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at b0004000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: b0100000-b01fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface
Bridge [8086:2641] (rev 04)
Subsystem: Fujitsu Limited. Unknown device [10cf:12e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) IDE Controller [8086:266f] (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Limited. Unknown device [10cf:12e5]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1410 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA
Controller [8086:2653] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Fujitsu Limited. Unknown device [10cf:12e6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 14b8 [size=8]
Region 1: I/O ports at 140c [size=4]
Region 2: I/O ports at 14b0 [size=8]
Region 3: I/O ports at 1408 [size=4]
Region 4: I/O ports at 14a0 [size=16]
Region 5: Memory at b0004400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci, ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
SMBus Controller [8086:266a] (rev 04)
Subsystem: Fujitsu Limited. Unknown device [10cf:12e7]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at 14c0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
06:03.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
Subsystem: Fujitsu Limited. Unknown device [10cf:1254]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b0103000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 34000000-37fff000 (prefetchable)
Memory window 1: 38000000-3bfff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
06:03.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller
[1180:0552] (rev 08) (prog-if 10 [OHCI])
Subsystem: Fujitsu Limited. Unknown device [10cf:1255]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at b0100000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
06:03.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter [1180:0822] (rev 17)
Subsystem: Fujitsu Limited. Unknown device [10cf:1323]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci
Kernel modules: sdhci
06:03.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter [1180:0592] (rev 08)
Subsystem: Fujitsu Limited. Unknown device [10cf:1257]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 0: Memory at b0100c00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
06:03.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller
[1180:0852] (rev 03)
Subsystem: Fujitsu Limited. Unknown device [10cf:1324]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 0: Memory at b0101000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
06:04.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Fujitsu Limited. Unknown device [10cf:12ce]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at b0101400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp
06:05.0 Network controller [0280]: Intel Corporation PRO/Wireless 2915ABG
Network Connection [8086:4223] (rev 05)
Subsystem: Intel Corporation Unknown device [8086:1030]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at b0102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
Kernel modules: ipw2200
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1,
'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-686 depends on:
ii debconf [debconf-2.0] 1.5.19 Debian configuration management sy
ii initramfs-tools [linux-initr 0.91d tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.24-1-686 recommends:
ii libc6-i686 2.7-6 GNU C Library: Shared libraries [i
-- debconf information excluded
--
see shy jo
signature.asc
Description: Digital signature
