Your message dated Wed, 30 Jan 2008 19:32:33 +0100
with message-id <[EMAIL PROTECTED]>
and subject line linux-2.6: hangs reading sysfs files
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: lm-sensors
Version: 1:2.10.3-1+b1
Severity: important
*** Please type your report below this line ***
After upgrading lm-sensors:
libsensors3 1:2.10.3-1 -> 1:2.10.3-1+b1
lm-sensors 1:2.10.3-1 -> 1:2.10.3-1+b1
sensord 1:2.10.3-1 -> 1:2.10.3-1+b1
sensors command is stuck (process status is D+) for more than one minute
and can't read w83782d chip data:
w83782d-i2c-0-2d
Adapter: SMBus AMD766 adapter at 80e0
chs1 Fan: 0 RPM (min = 0 RPM, div = 128)
chs2 Fan: 0 RPM (min = 0 RPM, div = 128)
chs3 Fan: 0 RPM (min = 0 RPM, div = 128) (beep)
VRM2 Temp: -1°C (high = -1°C, hyst = -1°C) sensor =
transistor
CPU1 Temp: +0.0°C (high = +0°C, hyst = +0°C) sensor =
transistor
CPU0 Temp: +0.0°C (high = +0°C, hyst = +0°C) sensor =
transistor (beep)
alarms:
beep_enable:
Sound alarm enabled
w83627hf-isa-0c00
Adapter: ISA adapter
CPU1 Fan: 1360 RPM (min = 998 RPM, div = 8)
CPU2 Fan: 168750 RPM (min = 998 RPM, div = 8)
VRM1 Temp: +48°C (high = +50°C, hyst = +45°C) sensor =
transistor ALARM
AGP Temp: +54.0°C (high = +52°C, hyst = +47°C) sensor =
transistor ALARM
DDR Temp: +48.0°C (high = +52°C, hyst = +47°C) sensor =
transistor
vid: +1.650 V (VRM Version 9.0)
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm disabled
previous release was ok and work as expected. Nothing special show in
changelog.
The running kernel is the same, with same modules, as used with older
release before upgrade.
MB is a Tyan s2460 with 2 Athlon MP2200+
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.18-1 (SMP w/2 CPU cores; PREEMPT)
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Versions of packages lm-sensors depends on:
ii libc6 2.5-9+b1 GNU C Library: Shared libraries
ii libsensors3 1:2.10.3-1+b1 library to read
temperature/voltag
ii perl 5.8.8-7 Larry Wall's Practical
Extraction
ii sed 4.1.5-2 The GNU sed stream editor
ii ucf 3.001 Update Configuration File:
preserv
lm-sensors recommends no packages.
-- no debconf information
--- End Message ---
--- Begin Message ---
Version: 2.6.21-1
> tested on 2.6.21, result = success (sensors isn't stucked and hardware
> sensors reading is ok)
thus closing
--- End Message ---
