Package: linux-image-2.6.23-1-amd64
Version: 2.6.23-2
Severity: important
the media changer device doesn't work. on startup an error -EEXIST for a ch
kobject gets triggered.
linux-image-2.6.21-2-amd64 (2.6.21-6) works
every kernel later (even upstream) doesn't
the working snippet ...
ch0: type #1 (mt): 0x1+1 [medium transport]
ch0: type #2 (st): 0x1000+81 [storage]
ch0: type #3 (ie): 0x10+6 [import/export]
ch0: type #4 (dt): 0x100+2 [data transfer]
ch0: dt 0x100: ID/LUN unknown
ch0: dt 0x101: ID/LUN unknown
ch0: INITIALIZE ELEMENT STATUS, may take some time ...
ch0: ... finished
ch 2:0:0:1: Attached scsi changer ch0
sd 1:0:0:0: Attached scsi generic sg0 type 0
st 0:0:0:0: Attached scsi generic sg1 type 1
sd 3:0:0:0: Attached scsi generic sg2 type 0
st 2:0:0:0: Attached scsi generic sg3 type 1
ch 2:0:0:1: Attached scsi generic sg4 type 8
the failing snippet ...
scsi 2:0:0:1: Medium Changer ADIC Scalar i500 400G PQ: 0 ANSI: 3
kobject_add failed for 2:0:0:1 with -EEXIST, don't try to register things with
the same name in the same directory.
Call Trace:
[<ffffffff802febc0>] kobject_shadow_add+0x16e/0x1a2
[<ffffffff80365450>] device_add+0x99/0x614
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: disabled, doesn't support
DPO or FUA
[<ffffffff8805955a>] :scsi_mod:scsi_sysfs_add_sdev+0x35/0x218
[<ffffffff88057640>] :scsi_mod:scsi_probe_and_add_lun+0x953/0xa95
[<ffffffff88055f7f>] :scsi_mod:scsi_execute_req+0x82/0xde
[<ffffffff88058041>] :scsi_mod:__scsi_scan_target+0x407/0x5c3
[<ffffffff880587d0>] :scsi_mod:scsi_scan_target+0x96/0xbb
[<ffffffff880b49ed>] :scsi_transport_fc:fc_scsi_scan_rport+0x59/0x7a
[<ffffffff880b4994>] :scsi_transport_fc:fc_scsi_scan_rport+0x0/0x7a
[<ffffffff80243481>] run_workqueue+0x7f/0x10b
[<ffffffff80243db8>] worker_thread+0x0/0xe4
[<ffffffff80243e92>] worker_thread+0xda/0xe4
[<ffffffff80246b96>] autoremove_wake_function+0x0/0x2e
[<ffffffff80246a79>] kthread+0x47/0x76
[<ffffffff8020cc08>] child_rip+0xa/0x12
[<ffffffff80246a32>] kthread+0x0/0x76
[<ffffffff8020cbfe>] child_rip+0x0/0x12
error 1
st 2:0:0:0: Unexpected response from lun 1 while scanning, scan aborted
sd 3:0:0:0: [sdb] 1874933760 512-byte hardware sectors (959966 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: disabled, doesn't support
DPO or FUA
sdb: sdb4 < sdb5 >
sd 3:0:0:0: [sdb] Attached SCSI disk
SCSI Media Changer driver v0.25
ch 2:0:0:1: rejecting I/O to dead device
ch0: type #1 (mt): 0x0+0 [medium transport]
ch0: type #2 (st): 0x0+0 [storage]
ch0: type #3 (ie): 0x0+0 [import/export]
ch0: type #4 (dt): 0x0+0 [data transfer]
ch0: INITIALIZE ELEMENT STATUS, may take some time ...
ch 2:0:0:1: rejecting I/O to dead device
ch0: ... finished
ch 2:0:0:1: Attached scsi changer ch0
st 1:0:0:0: Attached scsi generic sg0 type 1
sd 0:0:0:0: Attached scsi generic sg1 type 0
st 2:0:0:0: Attached scsi generic sg2 type 1
ch 2:0:0:1: Attached scsi generic sg3 type 8
sd 3:0:0:0: Attached scsi generic sg4 type 0
the device gets listed but has the state set to deleted.
thanks for your help!
thomas
-- Package-specific info:
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (800, 'testing'), (700, 'stable'), (500,
'testing-proposed-updates'), (500, 'proposed-updates'), (70, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.21-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_AT.UTF-8, LC_CTYPE=de_AT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.23-1-amd64 depends on:
ii e2fsprogs 1.40.3-1 ext2 file system utilities and lib
ii initramfs-tools [linux-initr 0.91d tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
linux-image-2.6.23-1-amd64 recommends no packages.
-- debconf information excluded
Linux version 2.6.21-2-amd64 (Debian 2.6.21-6) ([EMAIL PROTECTED]) (gcc version
4.1.3 20070629 (prerelease) (Debian 4.1.2-13)) #1 SMP Tue Jul 10 21:39:38 UTC
2007
Command line: root=/dev/sda2 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bff10000 (usable)
BIOS-e820: 00000000bff10000 - 00000000bff1c000 (ACPI data)
BIOS-e820: 00000000bff1c000 - 00000000bff80000 (ACPI NVS)
BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 786192) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used
end_pfn_map = 2359296
DMI present.
ACPI: RSDP 000F6F50, 0014 (r0 PTLTD )
ACPI: RSDT BFF17D77, 0038 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP BFF1BA8E, 0074 (r1 NVIDIA CK8S 6040000 PTL_ F4240)
ACPI: DSDT BFF17DAF, 3CDF (r1 NVIDIA CK8 6040000 MSFT 100000E)
ACPI: FACS BFF1CFC0, 0040
ACPI: SSDT BFF1BB02, 03F4 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: SPCR BFF1BEF6, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
ACPI: APIC BFF1BF46, 0092 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT BFF1BFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
Scanning NUMA topology in Northbridge 24
Number of nodes 2
Node 0 using interleaving mode 1/0
No NUMA configuration found
Faking a node at 0000000000000000-0000000240000000
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 786192) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used
Bootmem setup node 0 0000000000000000-0000000240000000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 2359296
early_node_map[3] active PFN ranges
0: 0 -> 157
0: 256 -> 786192
0: 1048576 -> 2359296
On node 0 totalpages: 2096813
DMA zone: 56 pages used for memmap
DMA zone: 984 pages reserved
DMA zone: 2957 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 767816 pages, LIFO batch:31
Normal zone: 17920 pages used for memmap
Normal zone: 1292800 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xda400000] gsi_base[24])
IOAPIC[1]: apic_id 5, address 0xda400000, GSI 24-27
ACPI: IOAPIC (id[0x06] address[0xda401000] gsi_base[28])
IOAPIC[2]: apic_id 6, address 0xda401000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009d000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000c2000
Nosave address range: 00000000000c2000 - 0000000000100000
Nosave address range: 00000000bff10000 - 00000000bff1c000
Nosave address range: 00000000bff1c000 - 00000000bff80000
Nosave address range: 00000000bff80000 - 00000000c0000000
Nosave address range: 00000000c0000000 - 00000000e0000000
Nosave address range: 00000000e0000000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000fff80000
Nosave address range: 00000000fff80000 - 0000000100000000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 37504 bytes of per cpu data
Built 1 zonelists. Total pages: 2063573
Kernel command line: root=/dev/sda2 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2411.116 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
CPU 0: aperture @ c0000000 size 256 MB
CPU 1: aperture @ c0000000 size 256 MB
Memory: 8235196k/9437184k available (1976k kernel code, 152056k reserved, 931k
data, 296k init)
Calibrating delay using timer specific routine.. 4825.14 BogoMIPS (lpj=9650283)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12557907
Detected 12.557 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4822.60 BogoMIPS (lpj=9645200)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual Core AMD Opteron(tm) Processor 280 stepping 02
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x2
Initializing CPU#2
Calibrating delay using timer specific routine.. 4822.65 BogoMIPS (lpj=9645300)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/2 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
Dual Core AMD Opteron(tm) Processor 280 stepping 02
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x3
Initializing CPU#3
Calibrating delay using timer specific routine.. 4822.55 BogoMIPS (lpj=9645109)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/3 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
Dual Core AMD Opteron(tm) Processor 280 stepping 02
Brought up 4 CPUs
migration_cost=458
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:06.0
PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Root Bridge [PCI2] (0000:18)
PCI: Probing PCI hardware (bus 18)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0C01
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0F13
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0A03
pnp: PnP ACPI: found 14 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 4 of device 0000:00:01.1
PCI: Cannot allocate resource region 5 of device 0000:00:01.1
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c0000000 size 262144 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 256MB of IOMMU area in the AGP aperture
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:00' and the driver 'system'
pnp: 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
pnp: 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
pnp: 00:00: iomem range 0xfefff000-0xfeffffff has been reserved
pnp: match found with the PnP device '00:02' and the driver 'system'
pnp: 00:02: ioport range 0x8000-0x807f has been reserved
pnp: 00:02: ioport range 0x8080-0x80ff has been reserved
pnp: 00:02: ioport range 0x8400-0x847f has been reserved
pnp: 00:02: ioport range 0x8480-0x84ff has been reserved
pnp: 00:02: ioport range 0x8800-0x887f has been reserved
pnp: 00:02: ioport range 0x8880-0x88ff has been reserved
pnp: 00:02: ioport range 0x5000-0x503f has been reserved
pnp: 00:02: ioport range 0x5040-0x507f has been reserved
pnp: match found with the PnP device '00:03' and the driver 'system'
PCI: Bridge: 0000:00:09.0
IO window: 2000-2fff
MEM window: d8100000-d9ffffff
PREFETCH window: d0000000-d00fffff
PCI: Bridge: 0000:00:0d.0
IO window: 3000-3fff
MEM window: da000000-da0fffff
PREFETCH window: d0100000-d01fffff
PCI: Bridge: 0000:00:0e.0
IO window: 4000-4fff
MEM window: da100000-da1fffff
PREFETCH window: d0200000-d02fffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Bridge: 0000:18:0a.0
IO window: 5000-5fff
MEM window: da500000-da5fffff
PREFETCH window: dc000000-dfffffff
Time: acpi_pm clocksource has been installed.
PCI: Bridge: 0000:18:0b.0
IO window: disabled.
MEM window: da600000-da6fffff
PREFETCH window: d0300000-d03fffff
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6407k freed
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
audit(1199787212.768:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:18:0a.0 subordinate
bus.
PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:18:0b.0 subordinate
bus.
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:0a' and the driver 'serial'
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: match found with the PnP device '00:0b' and the driver 'serial'
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:08' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 296k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 23 (level, high) ->
IRQ 23
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 23, io mem 0xd8001000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
SCSI subsystem initialized
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
pnp: the driver 'ide' has been registered
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Floppy drive(s): fd0 is 1.44M
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
QLogic Fibre Channel HBA Driver
FDC 0 is a post-1991 82077
tg3.c:v3.75.2 (June 5, 2007)
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK4] -> GSI 19 (level, high) ->
IRQ 19
ACPI: PCI Interrupt 0000:1a:09.0[A] -> <6>qla2xxx 0000:02:00.0: Found an
ISP2432, irq 19, iobase 0xffffc2000001a000
GSI 28 (level, low) -> IRQ 28
qla2xxx 0000:02:00.0: Configuring PCI space...
PCI: Setting latency timer of device 0000:02:00.0 to 64
qla2xxx 0000:02:00.0: Configure NVRAM parameters...
qla2xxx 0000:02:00.0: Verifying loaded RISC code...
eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit)
10/100/1000Base-T Ethernet 00:e0:81:33:6e:5c
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:1a:09.1[B] -> GSI 29 (level, low) -> IRQ 29
eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit)
10/100/1000Base-T Ethernet 00:e0:81:33:6e:5d
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:19:02.0[A] -> GSI 26 (level, low) -> IRQ 26
udev: renamed network interface eth1 to giga1
udev: renamed network interface eth0 to giga2
qla2xxx 0000:02:00.0: Allocated (64 KB) for EFT...
qla2xxx 0000:02:00.0: Allocated (1413 KB) for firmware dump...
3w-9xxx: scsi1: AEN: WARNING (0x04:0x0008): Unclean shutdown detected:unit=0.
scsi0 : qla2xxx
qla2xxx 0000:02:00.0:
QLogic Fibre Channel HBA Driver: 8.01.07-k5
QLogic QLE2460 - PCI-Express to 4Gb FC, Single Channel
ISP2432: PCIe (2.5Gb/s x4) @ 0000:02:00.0 hdma+, host#=0, fw=4.03.00 [IP]
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNK3] -> GSI 18 (level, high) ->
IRQ 18
qla2xxx 0000:03:00.0: Found an ISP2432, irq 18, iobase 0xffffc2000001e000
qla2xxx 0000:03:00.0: Configuring PCI space...
PCI: Setting latency timer of device 0000:03:00.0 to 64
qla2xxx 0000:03:00.0: Configure NVRAM parameters...
qla2xxx 0000:03:00.0: Verifying loaded RISC code...
scsi1 : 3ware 9000 Storage Controller
3w-9xxx: scsi1: Found a 3ware 9000 Storage Controller at 0xda500000, IRQ: 26.
qla2xxx 0000:02:00.0: LIP reset occured (f7f7).
qla2xxx 0000:03:00.0: Allocated (64 KB) for EFT...
qla2xxx 0000:03:00.0: Allocated (1413 KB) for firmware dump...
qla2xxx 0000:02:00.0: LIP occured (f7f7).
qla2xxx 0000:02:00.0: LOOP UP detected (4 Gbps).
Probing IDE interface ide1...
scsi2 : qla2xxx
qla2xxx 0000:03:00.0:
QLogic Fibre Channel HBA Driver: 8.01.07-k5
QLogic QLE2460 - PCI-Express to 4Gb FC, Single Channel
ISP2432: PCIe (2.5Gb/s x4) @ 0000:03:00.0 hdma+, host#=2, fw=4.03.00 [IP]
3w-9xxx: scsi1: Firmware FE9X 3.08.00.016, BIOS BE9X 3.08.00.004, Ports: 4.
ACPI: PCI Interrupt 0000:19:03.0[A] -> GSI 27 (level, low) -> IRQ 27
scsi 1:0:0:0: Direct-Access AMCC 9550SX-4LP DISK 3.08 PQ: 0 ANSI: 5
3w-9xxx: scsi3: AEN: WARNING (0x04:0x0008): Unclean shutdown detected:unit=0.
qla2xxx 0000:03:00.0: LIP reset occured (f7f7).
qla2xxx 0000:03:00.0: LIP occured (f7f7).
qla2xxx 0000:03:00.0: LOOP UP detected (4 Gbps).
scsi3 : 3ware 9000 Storage Controller
3w-9xxx: scsi3: Found a 3ware 9000 Storage Controller at 0xda501000, IRQ: 27.
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, high) ->
IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xd8000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
scsi 0:0:0:0: Sequential-Access IBM ULTRIUM-TD3 6B20 PQ: 0 ANSI: 3
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] -> GSI 18 (level, high) ->
IRQ 18
e100: eth0: e100_probe: addr 0xd8101000, irq 18, MAC addr 00:E0:81:33:6F:28
3w-9xxx: scsi3: Firmware FE9X 3.08.00.016, BIOS BE9X 3.08.00.004, Ports: 4.
scsi 3:0:0:0: Direct-Access AMCC 9550SX-4LP DISK 3.08 PQ: 0 ANSI: 5
libata version 2.20 loaded.
scsi 2:0:0:0: Sequential-Access IBM ULTRIUM-TD3 6B20 PQ: 0 ANSI: 3
scsi 2:0:0:1: Medium Changer ADIC Scalar i500 400G PQ: 0 ANSI: 3
SCSI device sda: 2343684096 512-byte hdwr sectors (1199966 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
udev: renamed network interface eth0 to mega1
SCSI device sda: write cache: enabled, read cache: disabled, doesn't support
DPO or FUA
SCSI device sda: 2343684096 512-byte hdwr sectors (1199966 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
SCSI device sda: write cache: enabled, read cache: disabled, doesn't support
DPO or FUA
sda:<6>st: Version 20070203, fixed bufsize 32768, s/g segs 256
SCSI Media Changer driver v0.25
sda1 sda2 sda3
sd 1:0:0:0: Attached scsi disk sda
st 0:0:0:0: Attached scsi tape st0
st 0:0:0:0: st0: try direct i/o: yes (alignment 512 B)
SCSI device sdb: 1874933760 512-byte hdwr sectors (959966 MB)
sdb: Write Protect is off
sdb: Mode Sense: 23 00 00 00
SCSI device sdb: write cache: enabled, read cache: disabled, doesn't support
DPO or FUA
SCSI device sdb: 1874933760 512-byte hdwr sectors (959966 MB)
sdb: Write Protect is off
sdb: Mode Sense: 23 00 00 00
SCSI device sdb: write cache: enabled, read cache: disabled, doesn't support
DPO or FUA
sdb: sdb4 < sdb5 >
sd 3:0:0:0: Attached scsi disk sdb
st 2:0:0:0: Attached scsi tape st1
st 2:0:0:0: st1: try direct i/o: yes (alignment 512 B)
ch0: type #1 (mt): 0x1+1 [medium transport]
ch0: type #2 (st): 0x1000+81 [storage]
ch0: type #3 (ie): 0x10+6 [import/export]
ch0: type #4 (dt): 0x100+2 [data transfer]
ch0: dt 0x100: ID/LUN unknown
ch0: dt 0x101: ID/LUN unknown
ch0: INITIALIZE ELEMENT STATUS, may take some time ...
ch0: ... finished
ch 2:0:0:1: Attached scsi changer ch0
sd 1:0:0:0: Attached scsi generic sg0 type 0
st 0:0:0:0: Attached scsi generic sg1 type 1
sd 3:0:0:0: Attached scsi generic sg2 type 0
st 2:0:0:0: Attached scsi generic sg3 type 1
ch 2:0:0:1: Attached scsi generic sg4 type 8
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED]
Attempting manual resume
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no
debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
st0: Block limits 1 - 16777215 bytes.
st1: Block limits 1 - 16777215 bytes.
input: PC Speaker as /class/input/input1
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1040
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
loop: loaded (max 8 devices)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Filesystem "dm-3": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-3
Ending clean XFS mount for filesystem: dm-3
Filesystem "dm-2": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-2
Ending clean XFS mount for filesystem: dm-2
Filesystem "dm-4": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-4
Ending clean XFS mount for filesystem: dm-4
Filesystem "dm-0": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-0
Ending clean XFS mount for filesystem: dm-0
Filesystem "dm-1": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-1
Ending clean XFS mount for filesystem: dm-1
Filesystem "dm-5": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-5
Ending clean XFS mount for filesystem: dm-5
Filesystem "dm-8": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-8
Ending clean XFS mount for filesystem: dm-8
Filesystem "dm-7": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-7
Ending clean XFS mount for filesystem: dm-7
Adding 2097144k swap on /dev/mapper/system_vg-swap1_lv. Priority:-1 extents:1
across:2097144k
PM: Writing back config space on device 0000:1a:09.0 at offset b (was 164814e4,
writing 164414e4)
PM: Writing back config space on device 0000:1a:09.0 at offset 3 (was 804000,
writing 804010)
PM: Writing back config space on device 0000:1a:09.0 at offset 2 (was 2000000,
writing 2000003)
PM: Writing back config space on device 0000:1a:09.0 at offset 1 (was 2b00000,
writing 2b00106)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): giga2: link is not ready
PM: Writing back config space on device 0000:1a:09.1 at offset b (was 164814e4,
writing 164414e4)
PM: Writing back config space on device 0000:1a:09.1 at offset 3 (was 804000,
writing 804010)
PM: Writing back config space on device 0000:1a:09.1 at offset 2 (was 2000000,
writing 2000003)
PM: Writing back config space on device 0000:1a:09.1 at offset 1 (was 2b00000,
writing 2b00106)
ADDRCONF(NETDEV_UP): giga1: link is not ready
Linux version 2.6.23-1-amd64 (Debian 2.6.23-2) ([EMAIL PROTECTED]) (gcc version
4.1.3 20071209 (prerelease) (Debian 4.1.2-18)) #1 SMP Fri Dec 21 12:00:17 UTC
2007
Command line: root=/dev/sda2 ro scsi_mod.scan=sync
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bff10000 (usable)
BIOS-e820: 00000000bff10000 - 00000000bff1c000 (ACPI data)
BIOS-e820: 00000000bff1c000 - 00000000bff80000 (ACPI NVS)
BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 786192) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used
end_pfn_map = 2359296
DMI present.
ACPI: RSDP 000F6F50, 0014 (r0 PTLTD )
ACPI: RSDT BFF17D77, 0038 (r1 PTLTD RSDT 6040000 LTP 0)
ACPI: FACP BFF1BA8E, 0074 (r1 NVIDIA CK8S 6040000 PTL_ F4240)
ACPI: DSDT BFF17DAF, 3CDF (r1 NVIDIA CK8 6040000 MSFT 100000E)
ACPI: FACS BFF1CFC0, 0040
ACPI: SSDT BFF1BB02, 03F4 (r1 PTLTD POWERNOW 6040000 LTP 1)
ACPI: SPCR BFF1BEF6, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
ACPI: APIC BFF1BF46, 0092 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT BFF1BFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
Scanning NUMA topology in Northbridge 24
CPU has 2 num_cores
Number of nodes 2
Node 0 using interleaving mode 1/0
No NUMA configuration found
Faking a node at 0000000000000000-0000000240000000
Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Entering add_active_range(0, 256, 786192) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used
Bootmem setup node 0 0000000000000000-0000000240000000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 2359296
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0 -> 157
0: 256 -> 786192
0: 1048576 -> 2359296
On node 0 totalpages: 2096813
DMA zone: 56 pages used for memmap
DMA zone: 1041 pages reserved
DMA zone: 2900 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 767816 pages, LIFO batch:31
Normal zone: 17920 pages used for memmap
Normal zone: 1292800 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xda400000] gsi_base[24])
IOAPIC[1]: apic_id 5, address 0xda400000, GSI 24-27
ACPI: IOAPIC (id[0x06] address[0xda401000] gsi_base[28])
IOAPIC[2]: apic_id 6, address 0xda401000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009d000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000c2000
swsusp: Registered nosave memory region: 00000000000c2000 - 0000000000100000
swsusp: Registered nosave memory region: 00000000bff10000 - 00000000bff1c000
swsusp: Registered nosave memory region: 00000000bff1c000 - 00000000bff80000
swsusp: Registered nosave memory region: 00000000bff80000 - 00000000c0000000
swsusp: Registered nosave memory region: 00000000c0000000 - 00000000e0000000
swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000
swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000
swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fee00000
swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000
swsusp: Registered nosave memory region: 00000000fee01000 - 00000000fff80000
swsusp: Registered nosave memory region: 00000000fff80000 - 0000000100000000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 35176 bytes of per cpu data
Built 1 zonelists in Zone order. Total pages: 2063516
Policy zone: Normal
Kernel command line: root=/dev/sda2 ro scsi_mod.scan=sync
Unknown boot option `scsi_mod.scan=sync': ignoring
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2411.121 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
CPU 0: aperture @ c0000000 size 256 MB
CPU 1: aperture @ c0000000 size 256 MB
Memory: 8247284k/9437184k available (2060k kernel code, 139968k reserved, 969k
data, 304k init)
Calibrating delay using timer specific routine.. 4825.17 BogoMIPS (lpj=9650351)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12557933
Detected 12.557 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4822.57 BogoMIPS (lpj=9645146)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual Core AMD Opteron(tm) Processor 280 stepping 02
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x2
Initializing CPU#2
Calibrating delay using timer specific routine.. 4822.57 BogoMIPS (lpj=9645153)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/2 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
Dual Core AMD Opteron(tm) Processor 280 stepping 02
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x3
Initializing CPU#3
Calibrating delay using timer specific routine.. 4822.49 BogoMIPS (lpj=9644983)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/3 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
Dual Core AMD Opteron(tm) Processor 280 stepping 02
Brought up 4 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Root Bridge [PCI2] (0000:18)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0
ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: ACPI device : hid PNP0C01
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0F13
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0700
pnp: ACPI device : hid PNP0A03
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 4 of device 0000:00:01.1
PCI: Cannot allocate resource region 5 of device 0000:00:01.1
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c0000000 size 262144 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 256MB of IOMMU area in the AGP aperture
ACPI: RTC can wake from S4
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:00' and the driver 'system'
pnp: 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
pnp: 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
pnp: 00:00: iomem range 0xfefff000-0xfeffffff has been reserved
pnp: match found with the PnP device '00:02' and the driver 'system'
pnp: 00:02: ioport range 0x8000-0x807f has been reserved
pnp: 00:02: ioport range 0x8080-0x80ff has been reserved
pnp: 00:02: ioport range 0x8400-0x847f has been reserved
pnp: 00:02: ioport range 0x8480-0x84ff has been reserved
pnp: 00:02: ioport range 0x8800-0x887f has been reserved
pnp: 00:02: ioport range 0x8880-0x88ff has been reserved
pnp: 00:02: ioport range 0x5000-0x503f has been reserved
pnp: 00:02: ioport range 0x5040-0x507f has been reserved
pnp: match found with the PnP device '00:03' and the driver 'system'
PCI: Bridge: 0000:00:09.0
IO window: 2000-2fff
MEM window: d8100000-d9ffffff
PREFETCH window: d0000000-d00fffff
PCI: Bridge: 0000:00:0d.0
IO window: 3000-3fff
MEM window: da000000-da0fffff
PREFETCH window: d0100000-d01fffff
PCI: Bridge: 0000:00:0e.0
IO window: 4000-4fff
MEM window: da100000-da1fffff
PREFETCH window: d0200000-d02fffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Bridge: 0000:18:0a.0
IO window: 5000-5fff
MEM window: da500000-da5fffff
PREFETCH window: dc000000-dfffffff
PCI: Bridge: 0000:18:0b.0
IO window: disabled.
MEM window: da600000-da6fffff
PREFETCH window: d0300000-d03fffff
NET: Registered protocol family 2
Time: acpi_pm clocksource has been installed.
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 1048576 (order: 12, 25165824 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 1048576 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6377k freed
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
audit(1199786432.052:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
Boot video device is 0000:01:06.0
PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:18:0a.0 subordinate
bus.
AMD8131 rev 12 detected, disabling PCI-X MMRBC
PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:18:0b.0 subordinate
bus.
AMD8131 rev 12 detected, disabling PCI-X MMRBC
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:0a' and the driver 'serial'
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: match found with the PnP device '00:0b' and the driver 'serial'
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
input: Macintosh mouse button emulation as /class/input/input0
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:08' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 304k freed
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 23 (level, high) ->
IRQ 23
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 23, io mem 0xd8001000
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
pnp: the driver 'ide' has been registered
SCSI subsystem initialized
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
QLogic Fibre Channel HBA Driver
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, high) ->
IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xd8000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ACPI: PCI Interrupt 0000:19:02.0[A] -> GSI 26 (level, low) -> IRQ 26
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK3] -> GSI 19 (level, high) ->
IRQ 19
e100: eth0: e100_probe: addr 0xd8101000, irq 19, MAC addr 00:E0:81:33:6F:28
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK4] -> GSI 18 (level, high) ->
IRQ 18
qla2xxx 0000:02:00.0: Found an ISP2432, irq 18, iobase 0xffffc2000273a000
qla2xxx 0000:02:00.0: Configuring PCI space...
PCI: Setting latency timer of device 0000:02:00.0 to 64
qla2xxx 0000:02:00.0: Configure NVRAM parameters...
qla2xxx 0000:02:00.0: Verifying loaded RISC code...
3w-9xxx: scsi0: AEN: WARNING (0x04:0x0008): Unclean shutdown detected:unit=0.
scsi0 : 3ware 9000 Storage Controller
3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xda500000, IRQ: 26.
qla2xxx 0000:02:00.0: Allocated (64 KB) for EFT...
qla2xxx 0000:02:00.0: Allocated (1413 KB) for firmware dump...
scsi1 : qla2xxx
qla2xxx 0000:02:00.0:
QLogic Fibre Channel HBA Driver: 8.02.00-k3
QLogic QLE2460 - PCI-Express to 4Gb FC, Single Channel
ISP2432: PCIe (2.5Gb/s x4) @ 0000:02:00.0 hdma+, host#=1, fw=4.03.00 [IP]
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNK3] -> GSI 19 (level, high) ->
IRQ 19
qla2xxx 0000:03:00.0: Found an ISP2432, irq 19, iobase 0xffffc2000273c000
qla2xxx 0000:03:00.0: Configuring PCI space...
PCI: Setting latency timer of device 0000:03:00.0 to 64
qla2xxx 0000:03:00.0: Configure NVRAM parameters...
qla2xxx 0000:03:00.0: Verifying loaded RISC code...
qla2xxx 0000:02:00.0: LIP reset occured (f7f7).
qla2xxx 0000:02:00.0: LIP occured (f7f7).
qla2xxx 0000:02:00.0: LOOP UP detected (4 Gbps).
qla2xxx 0000:03:00.0: Allocated (64 KB) for EFT...
qla2xxx 0000:03:00.0: Allocated (1413 KB) for firmware dump...
3w-9xxx: scsi0: Firmware FE9X 3.08.00.016, BIOS BE9X 3.08.00.004, Ports: 4.
ACPI: PCI Interrupt 0000:19:03.0[A] -> GSI 27 (level, low) -> IRQ 27
scsi 0:0:0:0: Direct-Access AMCC 9550SX-4LP DISK 3.08 PQ: 0 ANSI: 5
scsi2 : qla2xxx
qla2xxx 0000:03:00.0:
QLogic Fibre Channel HBA Driver: 8.02.00-k3
QLogic QLE2460 - PCI-Express to 4Gb FC, Single Channel
ISP2432: PCIe (2.5Gb/s x4) @ 0000:03:00.0 hdma+, host#=2, fw=4.03.00 [IP]
3w-9xxx: scsi3: AEN: WARNING (0x04:0x0008): Unclean shutdown detected:unit=0.
scsi3 : 3ware 9000 Storage Controller
3w-9xxx: scsi3: Found a 3ware 9000 Storage Controller at 0xda501000, IRQ: 27.
qla2xxx 0000:03:00.0: LIP reset occured (f7f7).
qla2xxx 0000:03:00.0: LIP occured (f7f7).
qla2xxx 0000:03:00.0: LOOP UP detected (4 Gbps).
3w-9xxx: scsi3: Firmware FE9X 3.08.00.016, BIOS BE9X 3.08.00.004, Ports: 4.
tg3.c:v3.81.1 (October 18, 2007)
ACPI: PCI Interrupt 0000:1a:09.0[A] -> GSI 28 (level, low) -> IRQ 28
scsi 3:0:0:0: Direct-Access AMCC 9550SX-4LP DISK 3.08 PQ: 0 ANSI: 5
net mega1: device_rename: sysfs_create_symlink failed (-17)
udev: renamed network interface eth0 to mega1
eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit)
10/100/1000Base-T Ethernet 00:e0:81:33:6e:5c
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:1a:09.1[B] -> GSI 29 (level, low) -> IRQ 29
scsi 1:0:0:0: Sequential-Access IBM ULTRIUM-TD3 6B20 PQ: 0 ANSI: 3
eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit)
10/100/1000Base-T Ethernet 00:e0:81:33:6e:5d
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
sd 0:0:0:0: [sda] 2343684096 512-byte hardware sectors (1199966 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
sd 0:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support
DPO or FUA
sd 0:0:0:0: [sda] 2343684096 512-byte hardware sectors (1199966 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
net giga1: device_rename: sysfs_create_symlink failed (-17)
udev: renamed network interface eth1 to giga1
sd 0:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support
DPO or FUA
sda:<3>net giga2: device_rename: sysfs_create_symlink failed (-17)
udev: renamed network interface eth0 to giga2
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
st: Version 20070203, fixed bufsize 32768, s/g segs 256
st 1:0:0:0: Attached scsi tape st0
st 1:0:0:0: st0: try direct i/o: yes (alignment 512 B)
scsi 2:0:0:0: Sequential-Access IBM ULTRIUM-TD3 6B20 PQ: 0 ANSI: 3
st 2:0:0:0: Attached scsi tape st1
st 2:0:0:0: st1: try direct i/o: yes (alignment 512 B)
sd 3:0:0:0: [sdb] 1874933760 512-byte hardware sectors (959966 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
scsi 2:0:0:1: Medium Changer ADIC Scalar i500 400G PQ: 0 ANSI: 3
kobject_add failed for 2:0:0:1 with -EEXIST, don't try to register things with
the same name in the same directory.
Call Trace:
[<ffffffff802febc0>] kobject_shadow_add+0x16e/0x1a2
[<ffffffff80365450>] device_add+0x99/0x614
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: disabled, doesn't support
DPO or FUA
[<ffffffff8805955a>] :scsi_mod:scsi_sysfs_add_sdev+0x35/0x218
[<ffffffff88057640>] :scsi_mod:scsi_probe_and_add_lun+0x953/0xa95
[<ffffffff88055f7f>] :scsi_mod:scsi_execute_req+0x82/0xde
[<ffffffff88058041>] :scsi_mod:__scsi_scan_target+0x407/0x5c3
[<ffffffff880587d0>] :scsi_mod:scsi_scan_target+0x96/0xbb
[<ffffffff880b49ed>] :scsi_transport_fc:fc_scsi_scan_rport+0x59/0x7a
[<ffffffff880b4994>] :scsi_transport_fc:fc_scsi_scan_rport+0x0/0x7a
[<ffffffff80243481>] run_workqueue+0x7f/0x10b
[<ffffffff80243db8>] worker_thread+0x0/0xe4
[<ffffffff80243e92>] worker_thread+0xda/0xe4
[<ffffffff80246b96>] autoremove_wake_function+0x0/0x2e
[<ffffffff80246a79>] kthread+0x47/0x76
[<ffffffff8020cc08>] child_rip+0xa/0x12
[<ffffffff80246a32>] kthread+0x0/0x76
[<ffffffff8020cbfe>] child_rip+0x0/0x12
error 1
st 2:0:0:0: Unexpected response from lun 1 while scanning, scan aborted
sd 3:0:0:0: [sdb] 1874933760 512-byte hardware sectors (959966 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: disabled, doesn't support
DPO or FUA
sdb: sdb4 < sdb5 >
sd 3:0:0:0: [sdb] Attached SCSI disk
SCSI Media Changer driver v0.25
ch 2:0:0:1: rejecting I/O to dead device
ch0: type #1 (mt): 0x0+0 [medium transport]
ch0: type #2 (st): 0x0+0 [storage]
ch0: type #3 (ie): 0x0+0 [import/export]
ch0: type #4 (dt): 0x0+0 [data transfer]
ch0: INITIALIZE ELEMENT STATUS, may take some time ...
ch 2:0:0:1: rejecting I/O to dead device
ch0: ... finished
ch 2:0:0:1: Attached scsi changer ch0
st 1:0:0:0: Attached scsi generic sg0 type 1
sd 0:0:0:0: Attached scsi generic sg1 type 0
st 2:0:0:0: Attached scsi generic sg2 type 1
ch 2:0:0:1: Attached scsi generic sg3 type 8
sd 3:0:0:0: Attached scsi generic sg4 type 0
Probing IDE interface ide1...
libata version 2.21 loaded.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED]
Attempting manual resume
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no
debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
st1: Block limits 1 - 16777215 bytes.
st0: Block limits 1 - 16777215 bytes.
input: PC Speaker as /class/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1000
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1040
input: ImPS/2 Generic Wheel Mouse as /class/input/input5
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Filesystem "dm-3": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-3
Ending clean XFS mount for filesystem: dm-3
Filesystem "dm-2": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-2
Ending clean XFS mount for filesystem: dm-2
Filesystem "dm-4": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-4
Ending clean XFS mount for filesystem: dm-4
Filesystem "dm-0": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-0
Ending clean XFS mount for filesystem: dm-0
Filesystem "dm-1": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-1
Ending clean XFS mount for filesystem: dm-1
Filesystem "dm-5": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-5
Ending clean XFS mount for filesystem: dm-5
Filesystem "dm-8": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-8
Ending clean XFS mount for filesystem: dm-8
Filesystem "dm-7": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-7
Ending clean XFS mount for filesystem: dm-7
Adding 2097144k swap on /dev/mapper/system_vg-swap1_lv. Priority:-1 extents:1
across:2097144k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): giga2: link is not ready
ADDRCONF(NETDEV_UP): giga1: link is not ready
