Package: linux-image-2.6.22-3-amd64 Version: 2.6.22-6 Severity: normal
The last report on the console is "disable non boot CPUs". I don't recall that from earlier versions. Console reponds to show_memory combination. Problem occurs with ndiswrapper removed, also and gdm stopped. Significantly 2.6.22-2 was just fine -- Package-specific info: ** Version: Linux version 2.6.22-3-amd64 (Debian 2.6.22-6) ([EMAIL PROTECTED]) (gcc version 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 SMP Sun Nov 4 18:18:09 UTC 2007 ** Tainted: P (1) ** Kernel log: Adding 5654840k swap on /dev/sda7. Priority:-1 extents:1 across:5654840k EXT3 FS on sda2, internal journal loop: module loaded device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. ndiswrapper version 1.49 loaded (smp=yes, preempt=no) ndiswrapper (link_pe_images:576): fixing KI_USER_SHARED_DATA address in the driver ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:30:00.0 to 64 ndiswrapper: using IRQ 18 PM: Writing back config space on device 0000:10:00.0 at offset c (was 81000000, writing 0) wlan0: ethernet device 00:1a:73:a6:38:9d using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4312.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK usbcore: registered new interface driver ndiswrapper ACPI: Battery Slot [C1ED] (battery present) ACPI: Battery Slot [C1EC] (battery absent) ACPI: AC Adapter [C1EB] (on-line) input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input4 ACPI: Sleep Button (CM) [C28D] input: Lid Switch as /class/input/input5 ACPI: Lid Switch [C265] lp: driver loaded but no devices found ppdev: user-space parallel port driver tsdev (compaq touchscreen emulation) is scheduled for removal. See Documentation/feature-removal-schedule.txt for details. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (version 2.00.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x15 powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x17 powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e powernow-k8: ph2 null fid transition 0xc /dev/vmmon[4039]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[4039]: Module vmmon: initialized /dev/vmnet: open called by PID 4078 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-wlan0: enabling the bridge bridge-wlan0: is a Wireless Adapter bridge-wlan0: up bridge-wlan0: already up bridge-wlan0: attached /dev/vmnet: open called by PID 4093 (vmnet-bridge) /dev/vmnet: hub 2 does not exist, allocating memory. /dev/vmnet: port on hub 2 successfully opened bridge-eth0: enabling the bridge bridge-eth0: up bridge-eth0: already up bridge-eth0: attached wlan0: no IPv6 routers present APIC error on CPU0: 00(40) APIC error on CPU1: 00(40) ACPI: Transitioning device [C39C] to D0 ACPI: Transitioning device [C39C] to D0 ACPI: Unable to turn cooling device [ffff81000118ded0] 'on' ACPI: Transitioning device [C39C] to D0 ACPI: Transitioning device [C39C] to D0 ACPI: Unable to turn cooling device [ffff81000118ded0] 'on' APIC error on CPU1: 40(40) APIC error on CPU0: 40(40) APIC error on CPU0: 40(40) APIC error on CPU1: 40(40) ACPI: Transitioning device [C39C] to D0 ACPI: Transitioning device [C39C] to D0 ACPI: Unable to turn cooling device [ffff81000118ded0] 'on' ACPI: Transitioning device [C39C] to D0 ACPI: Transitioning device [C39C] to D0 ACPI: Unable to turn cooling device [ffff81000118ded0] 'on' ACPI: Transitioning device [C39C] to D0 ACPI: Transitioning device [C39C] to D0 ACPI: Unable to turn cooling device [ffff81000118ded0] 'on' APIC error on CPU0: 40(40) APIC error on CPU1: 40(40) ACPI: Transitioning device [C39C] to D0 ACPI: Transitioning device [C39C] to D0 ACPI: Unable to turn cooling device [ffff81000118ded0] 'on' ** Loaded modules: Module Size Used by vmnet 53184 6 vmmon 146668 0 cpufreq_ondemand 13328 1 cpufreq_userspace 9472 0 cpufreq_powersave 6272 0 powernow_k8 18464 1 freq_table 9600 2 cpufreq_ondemand,powernow_k8 rfcomm 49448 0 l2cap 32768 5 rfcomm ipv6 296840 19 ppdev 13704 0 lp 17352 0 button 13472 0 ac 10376 0 battery 15496 0 autofs4 28552 1 ndiswrapper 226592 0 dm_snapshot 21704 0 dm_mirror 26240 0 dm_mod 64112 2 dm_snapshot,dm_mirror firewire_sbp2 18180 0 loop 23044 0 joydev 15616 0 tsdev 13312 0 pcmcia 45976 0 firmware_class 15360 1 pcmcia snd_hda_intel 311968 1 snd_pcm_oss 48288 0 snd_mixer_oss 21376 1 snd_pcm_oss snd_pcm 89992 2 snd_hda_intel,snd_pcm_oss snd_timer 28424 1 snd_pcm pcspkr 7680 0 hci_usb 22684 2 yenta_socket 31756 1 rsrc_nonstatic 16128 1 yenta_socket serio_raw 11780 0 snd 65896 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer parport_pc 42664 0 parport 44428 3 ppdev,lp,parport_pc bluetooth 64516 7 rfcomm,l2cap,hci_usb i2c_piix4 13836 0 pcmcia_core 46628 3 pcmcia,yenta_socket,rsrc_nonstatic psmouse 45468 0 shpchp 38428 0 soundcore 13088 1 snd snd_page_alloc 15376 2 snd_hda_intel,snd_pcm i2c_core 31488 1 i2c_piix4 k8temp 10496 0 pci_hotplug 37252 1 shpchp evdev 15232 4 ext3 137232 5 jbd 68080 1 ext3 mbcache 13832 1 ext3 ide_cd 44832 0 cdrom 39848 1 ide_cd generic 10372 0 [permanent] atiixp 10640 0 [permanent] ide_core 147728 3 ide_cd,generic,atiixp sd_mod 33280 7 ahci 28804 7 ata_generic 13188 0 libata 132528 2 ahci,ata_generic scsi_mod 164536 3 firewire_sbp2,sd_mod,libata firewire_ohci 22784 0 firewire_core 49728 2 firewire_sbp2,firewire_ohci crc_itu_t 6656 1 firewire_core ehci_hcd 37900 0 ohci_hcd 25860 0 tg3 111364 0 thermal 19600 0 processor 39912 2 powernow_k8,thermal fan 9992 0 ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc Unknown device [1002:7910] Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 00:01.0 PCI bridge [0604]: ATI Technologies Inc Unknown device [1002:7912] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: d0400000-d05fffff Prefetchable memory behind bridge: 00000000c0000000-00000000c7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:04.0 PCI bridge [0604]: ATI Technologies Inc Unknown device [1002:7914] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=10, subordinate=10, sec-latency=0 Memory behind bridge: d0000000-d00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:05.0 PCI bridge [0604]: ATI Technologies Inc Unknown device [1002:7915] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=20, subordinate=20, sec-latency=0 I/O behind bridge: 00002000-00003fff Memory behind bridge: cc000000-cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:06.0 PCI bridge [0604]: ATI Technologies Inc Unknown device [1002:7916] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=30, subordinate=30, sec-latency=0 Memory behind bridge: c8000000-c80fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 9000 [size=8] Region 1: I/O ports at 9008 [size=4] Region 2: I/O ports at 9010 [size=8] Region 3: I/O ports at 5018 [size=4] Region 4: I/O ports at 5020 [size=16] Region 5: Memory at d0609000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at d0601000 (32-bit, non-prefetchable) [size=4K] 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at d0602000 (32-bit, non-prefetchable) [size=4K] 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 17 Region 0: Memory at d0603000 (32-bit, non-prefetchable) [size=4K] 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at d0604000 (32-bit, non-prefetchable) [size=4K] 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 17 Region 0: Memory at d0605000 (32-bit, non-prefetchable) [size=4K] 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 23 Region 0: Memory at d0606000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 00:14.0 SMBus [0c05]: ATI Technologies Inc SB600 SMBus [1002:4385] (rev 14) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: I/O ports at 8200 [size=16] Capabilities: <access denied> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 82 [Master PriP]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 5040 [size=16] 00:14.2 Audio device [0403]: ATI Technologies Inc SB600 Azalia [1002:4383] Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at 8c000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SB600 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=02, subordinate=06, sec-latency=64 I/O behind bridge: 00001000-00001fff Memory behind bridge: d0100000-d03fffff Prefetchable memory behind bridge: 88000000-8bffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: <access denied> 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Unknown device [1002:791f] (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 11 Region 0: Memory at c0000000 (64-bit, prefetchable) [size=128M] Region 2: Memory at d0400000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at 4000 [size=256] Region 5: Memory at d0500000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b6) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 Interrupt: pin A routed to IRQ 20 Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 88000000-8bfff000 (prefetchable) Memory window 1: 90000000-93fff000 I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 02:04.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd Unknown device [1180:0832] (rev 02) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 21 Region 0: Memory at d0101000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> 10:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02) Subsystem: Hewlett-Packard Company Unknown device [103c:30c2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 30:00.0 Network controller [0280]: Broadcom Corporation BCM4310 UART [14e4:4312] (rev 02) Subsystem: Hewlett-Packard Company Unknown device [103c:1371] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable'), (250, 'testing') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.22-3-amd64 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Versions of packages linux-image-2.6.22-3-amd64 depends on: ii e2fsprog 1.39+1.40-WIP-2006.11.14+dfsg-2 ext2 file system utilities and lib ii initramf 0.85h tools for generating an initramfs ii module-i 3.3-pre4-2 tools for managing Linux kernel mo linux-image-2.6.22-3-amd64 recommends no packages. -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.22-3-amd64/postinst/create-kimage-link-2.6.22-3-amd64: true linux-image-2.6.22-3-amd64/prerm/would-invalidate-boot-loader-2.6.22-3-amd64: true linux-image-2.6.22-3-amd64/postinst/depmod-error-initrd-2.6.22-3-amd64: false linux-image-2.6.22-3-amd64/postinst/old-system-map-link-2.6.22-3-amd64: true linux-image-2.6.22-3-amd64/preinst/overwriting-modules-2.6.22-3-amd64: true linux-image-2.6.22-3-amd64/preinst/failed-to-move-modules-2.6.22-3-amd64: linux-image-2.6.22-3-amd64/prerm/removing-running-kernel-2.6.22-3-amd64: true linux-image-2.6.22-3-amd64/postinst/depmod-error-2.6.22-3-amd64: false linux-image-2.6.22-3-amd64/postinst/bootloader-error-2.6.22-3-amd64: linux-image-2.6.22-3-amd64/preinst/abort-overwrite-2.6.22-3-amd64: * linux-image-2.6.22-3-amd64/preinst/already-running-this-2.6.22-3-amd64: linux-image-2.6.22-3-amd64/postinst/old-initrd-link-2.6.22-3-amd64: true linux-image-2.6.22-3-amd64/postinst/bootloader-test-error-2.6.22-3-amd64: linux-image-2.6.22-3-amd64/preinst/bootloader-initrd-2.6.22-3-amd64: true linux-image-2.6.22-3-amd64/preinst/lilo-initrd-2.6.22-3-amd64: true linux-image-2.6.22-3-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.22-3-amd64/preinst/abort-install-2.6.22-3-amd64: linux-image-2.6.22-3-amd64/preinst/elilo-initrd-2.6.22-3-amd64: true linux-image-2.6.22-3-amd64/postinst/old-dir-initrd-link-2.6.22-3-amd64: true linux-image-2.6.22-3-amd64/preinst/initrd-2.6.22-3-amd64: linux-image-2.6.22-3-amd64/postinst/kimage-is-a-directory: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
