Package: linux-image-2.6.22-3-686
Version: 2.6.22-6
Severity: important
When I connect my Ipod, I get the following error messages in
/var/log/syslog.
Nov 20 22:20:10 brahman kernel: usb 2-1: new high speed USB device using
ehci_hcd and address 2
Nov 20 22:20:10 brahman kernel: usb 2-1: configuration #1 chosen from 1 choice
Nov 20 22:20:10 brahman kernel: Initializing USB Mass Storage driver...
Nov 20 22:20:10 brahman kernel: scsi2 : SCSI emulation for USB Mass Storage
devices
Nov 20 22:20:10 brahman kernel: usbcore: registered new interface driver
usb-storage
Nov 20 22:20:10 brahman kernel: USB Mass Storage support registered.
Nov 20 22:20:10 brahman kernel: usb-storage: device found at 2
Nov 20 22:20:10 brahman kernel: usb-storage: waiting for device to settle
before scanning
Nov 20 22:20:11 brahman kernel: usb 2-1: USB disconnect, address 2
Nov 20 22:20:11 brahman udevd-event[3578]: unlink_secure:
chown(/dev/bus/usb/002/002, 0, 0) failed: No such file or directory
Nov 20 22:20:11 brahman udevd-event[3578]: unlink_secure:
chmod(/dev/bus/usb/002/002, 0000) failed: No such file or directory
Nov 20 22:20:11 brahman kernel: usb 2-1: new high speed USB device using
ehci_hcd and address 3
Nov 20 22:20:11 brahman kernel: usb 2-1: configuration #1 chosen from 1 choice
Nov 20 22:20:11 brahman kernel: scsi3 : SCSI emulation for USB Mass Storage
devices
Nov 20 22:20:11 brahman kernel: usb-storage: device found at 3
Nov 20 22:20:11 brahman kernel: usb-storage: waiting for device to settle
before scanning
Nov 20 22:20:16 brahman kernel: usb-storage: device scan complete
Nov 20 22:20:16 brahman kernel: scsi 3:0:0:0: Direct-Access Apple iPod
1.62 PQ: 0 ANSI: 0
Nov 20 22:20:16 brahman kernel: usb 2-1: USB disconnect, address 3
Nov 20 22:20:16 brahman kernel: sd 3:0:0:0: [sdb] READ CAPACITY failed
Nov 20 22:20:16 brahman kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK,SUGGEST_OK
Nov 20 22:20:16 brahman kernel: sd 3:0:0:0: [sdb] Sense not available.
Nov 20 22:20:16 brahman kernel: sd 3:0:0:0: [sdb] Write Protect is off
Nov 20 22:20:16 brahman kernel: sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00
Nov 20 22:20:16 brahman kernel: sd 3:0:0:0: [sdb] Assuming drive cache: write
through
Nov 20 22:20:16 brahman kernel: sd 3:0:0:0: [sdb] Attached SCSI removable disk
Nov 20 22:20:16 brahman usb_id[3609]: usb_id: unable to access '/block/sdb'
Nov 20 22:20:16 brahman scsi_id[3610]: scsi_id: unable to access '/block/sdb'
Nov 20 22:20:16 brahman scsi_id[3611]: scsi_id: unable to access '/block/sdb'
Nov 20 22:20:16 brahman scsi_id[3613]: scsi_id: unable to access '/block/sdb'
Nov 20 22:20:17 brahman kernel: usb 2-1: new high speed USB device using
ehci_hcd and address 4
Nov 20 22:20:17 brahman kernel: usb 2-1: configuration #1 chosen from 1 choice
Nov 20 22:20:17 brahman kernel: scsi4 : SCSI emulation for USB Mass Storage
devices
Nov 20 22:20:17 brahman kernel: usb-storage: device found at 4
Due to this, I am unable to mount it and use it. On the same machine and
kernel, I can mount otehr usb keydrives and cards from my digicam.
Further, this behaviour is not seen under linux-image-2.6.18-686.
-- Package-specific info:
$ apt-cache show linux-image-2.6.22-3-686
Package: linux-image-2.6.22-3-686
Priority: optional
Section: admin
Installed-Size: 51696
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: i386
Source: linux-2.6
Version: 2.6.22-6
Provides: linux-image, linux-image-2.6, linux-modules-2.6.22-3-686
Depends: module-init-tools (>= 0.9.13), initramfs-tools (>= 0.55) |
yaird (>= 0.0.12-8) | linux-initramfs-tool
Recommends: libc6-i686
Suggests: linux-doc-2.6.22, grub (>= 0.97-3) | lilo (>= 19.1)
Conflicts: grub (<= 0.95+cvs20040624-17), initramfs-tools (<< 0.55),
yaird (<< 0.0.12-8)
Filename:
pool/main/l/linux-2.6/linux-image-2.6.22-3-686_2.6.22-6_i386.deb
Size: 18255066
MD5sum: 10f3d714d0f015d59296c51508f98eb6
SHA1: b29d816339bdc40bf1d063169f6e945073bb44a8
SHA256: 5f349b97b127ba519b07fe26e8f69552b30ff4ddf644e4b9c2b72e648d92129d
Description: Linux 2.6.22 image on PPro/Celeron/PII/PIII/P4
This package provides the binary image and pre-built loadable modules
for Linux kernel 2.6.22 on Pentium Pro/Celeron/Pentium II/Pentium
III/Pentium 4 machines.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (900, 'testing'), (600, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.23-mas (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.22-3-686 depends on:
ii initramfs-tools [linux-initr 0.90a tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.22-3-686 recommends:
pn libc6-i686 <none> (no description available)
-- debconf information:
linux-image-2.6.22-3-686/prerm/would-invalidate-boot-loader-2.6.22-3-686: true
linux-image-2.6.22-3-686/preinst/overwriting-modules-2.6.22-3-686: true
linux-image-2.6.22-3-686/postinst/kimage-is-a-directory:
linux-image-2.6.22-3-686/postinst/old-system-map-link-2.6.22-3-686: true
linux-image-2.6.22-3-686/postinst/old-dir-initrd-link-2.6.22-3-686: true
linux-image-2.6.22-3-686/preinst/bootloader-initrd-2.6.22-3-686: true
linux-image-2.6.22-3-686/prerm/removing-running-kernel-2.6.22-3-686: true
linux-image-2.6.22-3-686/postinst/bootloader-test-error-2.6.22-3-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.22-3-686/preinst/lilo-initrd-2.6.22-3-686: true
linux-image-2.6.22-3-686/preinst/elilo-initrd-2.6.22-3-686: true
linux-image-2.6.22-3-686/preinst/lilo-has-ramdisk:
linux-image-2.6.22-3-686/postinst/old-initrd-link-2.6.22-3-686: true
linux-image-2.6.22-3-686/preinst/initrd-2.6.22-3-686:
linux-image-2.6.22-3-686/preinst/already-running-this-2.6.22-3-686:
linux-image-2.6.22-3-686/postinst/depmod-error-2.6.22-3-686: false
linux-image-2.6.22-3-686/postinst/bootloader-error-2.6.22-3-686:
linux-image-2.6.22-3-686/preinst/failed-to-move-modules-2.6.22-3-686:
linux-image-2.6.22-3-686/preinst/abort-install-2.6.22-3-686:
linux-image-2.6.22-3-686/preinst/abort-overwrite-2.6.22-3-686:
linux-image-2.6.22-3-686/postinst/depmod-error-initrd-2.6.22-3-686: false
linux-image-2.6.22-3-686/postinst/create-kimage-link-2.6.22-3-686: true
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
