Your message dated Tue, 20 Nov 2007 21:12:46 +0100
with message-id <[EMAIL PROTECTED]>
and subject line [solved] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action
0x2 frozen
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: linux-image-2.6.22-2-amd64
Version: 2.6.22-4
Severity: normal
When smartd starts up the kernel logs a lot of exceptions. Smartd can only
collect information from /dev/sda, not from /dev/sdb.
HDD information for /dev/sda and /dev/sdb:
ATA device, with non-removable media
Model Number: WDC WD5000ABYS-01TNA0
Serial Number: WD-WCAPW[snipped]
Firmware Revision: 12.01C01
Storage Controller:
IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA
Storage Controller IDE [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP
PriO])
on a Supermicro PDSMU board.
-- Package-specific info:
** Version:
Linux version 2.6.22-2-amd64 (Debian 2.6.22-4) ([EMAIL PROTECTED]) (gcc version
4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug 31 02:15:40 UTC
2007
** Not tainted
** Kernel log:
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM violation)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
** Loaded modules:
Module Size Used by
ipv6 296840 10
ipt_REJECT 9216 2
xt_tcpudp 7808 2
iptable_filter 7552 1
ip_tables 24680 1 iptable_filter
x_tables 24712 3 ipt_REJECT,xt_tcpudp,ip_tables
button 13472 0
ac 10376 0
battery 15496 0
dm_snapshot 21320 0
dm_mirror 26240 0
dm_mod 64112 2 dm_snapshot,dm_mirror
coretemp 12544 0
w83627hf 33048 0
w83793 42264 0
hwmon_vid 7296 2 w83627hf,w83793
loop 23044 0
iTCO_wdt 15824 0
i2c_i801 13468 0
evdev 15232 0
i2c_core 31488 2 w83793,i2c_i801
pcspkr 7680 0
ext3 137232 3
jbd 68080 1 ext3
mbcache 13832 1 ext3
raid1 27520 3
md_mod 83996 5 raid1
ide_generic 5504 0 [permanent]
ide_cd 44832 0
cdrom 39848 1 ide_cd
sd_mod 33280 10
piix 14980 0 [permanent]
generic 10372 0 [permanent]
ide_core 147728 4 ide_generic,ide_cd,piix,generic
ata_piix 19844 10
ata_generic 13188 0
ehci_hcd 37900 0
e1000 127552 0
libata 132016 2 ata_piix,ata_generic
scsi_mod 164536 2 sd_mod,libata
uhci_hcd 29856 0
thermal 19600 0
processor 39784 1 thermal
fan 9992 0
** PCI devices:
not available
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (x86_64)
Kernel: Linux 2.6.22-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.22-2-amd64 depends on:
ii e2fsprogs 1.40.2-1 ext2 file system utilities and lib
ii initramfs-tools [linux-initr 0.90a tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
linux-image-2.6.22-2-amd64 recommends no packages.
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.22-2-amd64/preinst/initrd-2.6.22-2-amd64:
linux-image-2.6.22-2-amd64/prerm/would-invalidate-boot-loader-2.6.22-2-amd64:
true
linux-image-2.6.22-2-amd64/preinst/already-running-this-2.6.22-2-amd64:
linux-image-2.6.22-2-amd64/preinst/bootloader-initrd-2.6.22-2-amd64: true
linux-image-2.6.22-2-amd64/postinst/old-system-map-link-2.6.22-2-amd64: true
linux-image-2.6.22-2-amd64/postinst/old-initrd-link-2.6.22-2-amd64: true
linux-image-2.6.22-2-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.22-2-amd64/prerm/removing-running-kernel-2.6.22-2-amd64: true
linux-image-2.6.22-2-amd64/preinst/abort-install-2.6.22-2-amd64:
linux-image-2.6.22-2-amd64/postinst/bootloader-test-error-2.6.22-2-amd64:
linux-image-2.6.22-2-amd64/preinst/lilo-initrd-2.6.22-2-amd64: true
linux-image-2.6.22-2-amd64/preinst/elilo-initrd-2.6.22-2-amd64: true
linux-image-2.6.22-2-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.22-2-amd64/preinst/failed-to-move-modules-2.6.22-2-amd64:
linux-image-2.6.22-2-amd64/postinst/old-dir-initrd-link-2.6.22-2-amd64: true
linux-image-2.6.22-2-amd64/postinst/depmod-error-initrd-2.6.22-2-amd64: false
linux-image-2.6.22-2-amd64/preinst/overwriting-modules-2.6.22-2-amd64: true
linux-image-2.6.22-2-amd64/postinst/depmod-error-2.6.22-2-amd64: false
linux-image-2.6.22-2-amd64/preinst/abort-overwrite-2.6.22-2-amd64:
linux-image-2.6.22-2-amd64/postinst/bootloader-error-2.6.22-2-amd64:
linux-image-2.6.22-2-amd64/postinst/create-kimage-link-2.6.22-2-amd64: true
--- End Message ---
--- Begin Message ---
Sorry for this noice.
After upgrading smartmontools from 5.37-5 to 5.37-6 all the trouble is gone.
Regards,
Pascal
--- End Message ---
