More info:
* contents of lspci -v
* output of dmesg from working kernel
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio
Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600 GT]
(rev a2)
03:02.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
03:02.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
03:02.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
80:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
80:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
80:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
80:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
80:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
80:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
80:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
Bootdata ok (command line is root=/dev/md0 ro )
Linux version 2.6.18-5-amd64 (Debian 2.6.18.dfsg.1-13) ([EMAIL PROTECTED]) (gcc
version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Thu May 31
23:51:05 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffd0000 (usable)
BIOS-e820: 00000000bffd0000 - 00000000bffde000 (ACPI data)
BIOS-e820: 00000000bffde000 - 00000000c0000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
DMI 2.3 present.
ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000f88c0
ACPI: XSDT (v001 A M I OEMXSDT 0x07000625 MSFT 0x00000097) @
0x00000000bffd0100
ACPI: FADT (v003 A M I OEMFACP 0x07000625 MSFT 0x00000097) @
0x00000000bffd0290
ACPI: MADT (v001 A M I OEMAPIC 0x07000625 MSFT 0x00000097) @
0x00000000bffd0390
ACPI: OEMB (v001 A M I AMI_OEM 0x07000625 MSFT 0x00000097) @
0x00000000bffde040
ACPI: SRAT (v001 A M I OEMSRAT 0x07000625 MSFT 0x00000097) @
0x00000000bffd5be0
ACPI: MCFG (v001 A M I OEMMCFG 0x07000625 MSFT 0x00000097) @
0x00000000bffd5cf0
ACPI: DSDT (v001 1ACAI 1ACAI003 0x00000003 INTL 0x02002026) @
0x0000000000000000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 1 -> APIC 1 -> Node 1
SRAT: Node 0 PXM 0 100000-c0000000
SRAT: Node 1 PXM 1 140000000-240000000
SRAT: Node 0 PXM 0 100000-140000000
SRAT: Node 0 PXM 0 0-140000000
NUMA: Using 30 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000140000000
Bootmem setup node 1 0000000140000000-0000000240000000
On node 0 totalpages: 1029618
DMA zone: 3050 pages, LIFO batch:0
DMA32 zone: 768008 pages, LIFO batch:31
Normal zone: 258560 pages, LIFO batch:31
On node 1 totalpages: 1034240
Normal zone: 1034240 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xdfefc000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 17, address 0xdfefc000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
Built 2 zonelists. Total pages: 2063858
Kernel command line: root=/dev/md0 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Disabling vsyscall due to use of PM timer
time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
time.c: Detected 2000.042 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
CPU 0: aperture @ 0 size 32 MB
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 4000000
Memory: 8170532k/9437184k available (1927k kernel code, 217496k reserved, 868k
data, 176k init)
Calibrating delay using timer specific routine.. 4003.22 BogoMIPS (lpj=8006447)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12500279
Detected 12.500 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4000.27 BogoMIPS (lpj=8000556)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 1
AMD Opteron(tm) Processor 246 stepping 08
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff -117 cycles, maxerr 1005 cycles)
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=0,503
checking if image is initramfs... it is
Freeing initrd memory: 6641k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Root Bridge [PCIB] (0000:80)
PCI: Probing PCI hardware (bus 80)
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *9
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *9
ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
ACPI: PCI Interrupt Link [LN2A] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2B] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LK2N] (IRQs 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LT3D] (IRQs 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LT2E] (IRQs 44 45 46 47) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0400
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: ACPI device : hid PNP0A03
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:08' and the driver 'system'
pnp: match found with the PnP device '00:09' and the driver 'system'
pnp: match found with the PnP device '00:0a' and the driver 'system'
pnp: 00:0a: ioport range 0x680-0x6ff has been reserved
pnp: 00:0a: ioport range 0x295-0x296 has been reserved
pnp: 00:0a: ioport range 0x778-0x77f has been reserved
pnp: 00:0a: ioport range 0xb78-0xb7f has been reserved
pnp: 00:0a: ioport range 0xf78-0xf7f has been reserved
pnp: match found with the PnP device '00:0b' and the driver 'system'
pnp: match found with the PnP device '00:0c' and the driver 'system'
PCI: Bridge: 0000:00:09.0
IO window: 8000-8fff
MEM window: cfb00000-cfbfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: c5a00000-cfafffff
PREFETCH window: cfd00000-dfcfffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Bridge: 0000:80:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:80:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:80:0d.0 to 64
PCI: Setting latency timer of device 0000:80:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1189385877.224:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
PCI: Setting latency timer of device 0000:80:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:80:0d.0:pcie00]
PCI: Setting latency timer of device 0000:80:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:80:0e.0:pcie00]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:05' and the driver 'serial'
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: match found with the PnP device '00:06' and the driver 'serial'
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
pnp: the driver 'i8042 kbd' has been registered
pnp: the driver 'i8042 aux' has been registered
pnp: the driver 'i8042 kbd' has been unregistered
pnp: the driver 'i8042 aux' has been unregistered
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 176k freed
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not
present [20060707]
ACPI: Getting cpuindex for acpiid 0x3
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not
present [20060707]
ACPI: Getting cpuindex for acpiid 0x4
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
GSI 16 sharing vector 0xD9 and IRQ 16
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, low) ->
IRQ 217
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 217, io mem 0xcfce0000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
GSI 17 sharing vector 0xE1 and IRQ 17
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LKLN] -> GSI 21 (level, low) ->
IRQ 225
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
SCSI subsystem initialized
libata version 2.00 loaded.
usb 1-3: new high speed USB device using ehci_hcd and address 2
usb 1-3: configuration #1 chosen from 1 choice
eth0: forcedeth.c: subsystem: 015d9:1011 bound to 0000:00:0a.0
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
GSI 18 sharing vector 0xE9 and IRQ 18
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) ->
IRQ 233
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 233, io mem 0xcfcfb000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 3
ACPI: PCI Interrupt Link [LK2N] enabled at IRQ 47
GSI 19 sharing vector 0x32 and IRQ 19
ACPI: PCI Interrupt 0000:80:0a.0[A] -> Link [LK2N] -> GSI 47 (level, low) ->
IRQ 50
PCI: Setting latency timer of device 0000:80:0a.0 to 64
forcedeth: using HIGHDMA
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 2 ports detected
usb 1-4.1: new high speed USB device using ehci_hcd and address 4
usb 1-4.1: configuration #1 chosen from 1 choice
hub 1-4.1:1.0: USB hub found
hub 1-4.1:1.0: 4 ports detected
eth1: forcedeth.c: subsystem: 015d9:1011 bound to 0000:80:0a.0
Probing IDE interface ide1...
usb 1-4.2: new high speed USB device using ehci_hcd and address 5
usb 1-4.2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
sata_nv 0000:00:07.0: version 2.0
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 22 (level, low) ->
IRQ 217
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0xCC00 ctl 0xC802 bmdma 0xBC00 irq 217
ata2: SATA max UDMA/133 cmd 0xC400 ctl 0xC002 bmdma 0xBC08 irq 217
scsi0 : sata_nv
usb 1-4.1.1: new low speed USB device using ehci_hcd and address 6
usb 1-4.1.1: configuration #1 chosen from 1 choice
usb 1-4.1.2: new low speed USB device using ehci_hcd and address 7
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
ata1: EH pending after completion, repeating EH (cnt=4)
scsi1 : sata_nv
usb 1-4.1.2: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input0
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:02.1-4.1.1
input: HID 0430:0005 as /class/input/input1
input: USB HID v1.00 Keyboard [HID 0430:0005] on usb-0000:00:02.1-4.1.2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata2.00: ata2: dev 0 multi count 16
ata2.00: configured for UDMA/133
ata2: EH pending after completion, repeating EH (cnt=4)
Vendor: ATA Model: ST3250823AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3250823AS Rev: 3.02
Type: Direct-Access ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 21 (level, low) ->
IRQ 225
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA400 irq 225
ata4: SATA max UDMA/133 cmd 0xAC00 ctl 0xA802 bmdma 0xA408 irq 225
scsi3 : sata_nv
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata3.00: ata3: dev 0 multi count 16
ata3.00: configured for UDMA/133
scsi4 : sata_nv
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata4.00: ata4: dev 0 multi count 16
ata4.00: configured for UDMA/133
Vendor: ATA Model: ST3250823AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3250823AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [LT3D] enabled at IRQ 46
GSI 20 sharing vector 0x3A and IRQ 20
ACPI: PCI Interrupt 0000:80:07.0[A] -> Link [LT3D] -> GSI 46 (level, low) ->
IRQ 58
PCI: Setting latency timer of device 0000:80:07.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
GSI 21 sharing vector 0x42 and IRQ 21
ACPI: PCI Interrupt 0000:03:02.2[B] -> Link [LNKA] -> GSI 19 (level, low) ->
IRQ 66
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66] MMIO=[cfbff800-cfbfffff]
Max Packet=[2048] IR/IT contexts=[4/8]
ata5: SATA max UDMA/133 cmd 0xF800 ctl 0xF402 bmdma 0xE800 irq 58
ata6: SATA max UDMA/133 cmd 0xF000 ctl 0xEC02 bmdma 0xE808 irq 58
scsi5 : sata_nv
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATA-6, max UDMA/100, 625142448 sectors: LBA48
ata5.00: ata5: dev 0 multi count 0
ata5.00: configured for UDMA/100
scsi6 : sata_nv
ata6: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: WDC WD3200JD-00K Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [LT2E] enabled at IRQ 45
GSI 22 sharing vector 0x4A and IRQ 22
ACPI: PCI Interrupt 0000:80:08.0[A] -> Link [LT2E] -> GSI 45 (level, low) ->
IRQ 74
PCI: Setting latency timer of device 0000:80:08.0 to 64
ata7: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xD400 irq 74
ata8: SATA max UDMA/133 cmd 0xDC00 ctl 0xD802 bmdma 0xD408 irq 74
scsi7 : sata_nv
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata7.00: configured for UDMA/133
scsi8 : sata_nv
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0151049482]
ata8: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: ST3250823AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: Attached scsi disk sdb
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2 sdc3
sd 3:0:0:0: Attached scsi disk sdc
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
sdd: sdd1 sdd2 sdd3
sd 4:0:0:0: Attached scsi disk sdd
SCSI device sde: 625142448 512-byte hdwr sectors (320073 MB)
sde: Write Protect is off
sde: Mode Sense: 00 3a 00 00
SCSI device sde: drive cache: write back
SCSI device sde: 625142448 512-byte hdwr sectors (320073 MB)
sde: Write Protect is off
sde: Mode Sense: 00 3a 00 00
SCSI device sde: drive cache: write back
sde: sde1 sde2
sd 5:0:0:0: Attached scsi disk sde
SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB)
sdf: Write Protect is off
sdf: Mode Sense: 00 3a 00 00
SCSI device sdf: drive cache: write back
SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB)
sdf: Write Protect is off
sdf: Mode Sense: 00 3a 00 00
SCSI device sdf: drive cache: write back
sdf: sdf1 sdf2 sdf3
sd 7:0:0:0: Attached scsi disk sdf
Probing IDE interface ide0...
Probing IDE interface ide1...
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
md: raid1 personality registered for level 1
raid5: automatically using best checksumming function: generic_sse
generic_sse: 6139.000 MB/sec
raid5: using function: generic_sse (6139.000 MB/sec)
raid6: int64x1 1806 MB/s
raid6: int64x2 2407 MB/s
raid6: int64x4 2353 MB/s
raid6: int64x8 1524 MB/s
Vendor: SMSC Model: 223 U HS-CF Rev: 3.60
Type: Direct-Access ANSI SCSI revision: 00
sd 2:0:0:0: Attached scsi removable disk sdg
Vendor: SMSC Model: 223 U HS-MS Rev: 3.60
Type: Direct-Access ANSI SCSI revision: 00
sd 2:0:0:1: Attached scsi removable disk sdh
Vendor: SMSC Model: 223 U HS-SM Rev: 3.60
Type: Direct-Access ANSI SCSI revision: 00
raid6: sse2x1 2421 MB/s
sd 2:0:0:2: Attached scsi removable disk sdi
Vendor: SMSC Model: 223 U HS-SD/MMC Rev: 3.60
Type: Direct-Access ANSI SCSI revision: 00
raid6: sse2x2 3378 MB/s
sd 2:0:0:3: Attached scsi removable disk sdj
raid6: sse2x4 3677 MB/s
raid6: using algorithm sse2x4 (3677 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: md0 stopped.
md: bind<sdb1>
md: bind<sdf1>
md: bind<sdc1>
md: bind<sda1>
md: bind<sdd1>
md: kicking non-fresh sdf1 from array!
md: unbind<sdf1>
md: export_rdev(sdf1)
raid1: raid set md0 active with 4 out of 5 mirrors
md: md1 stopped.
usb-storage: device scan complete
md: bind<sda3>
md: bind<sdb3>
md: bind<sdc3>
md: bind<sdf3>
md: bind<sdd3>
md: kicking non-fresh sdf3 from array!
md: unbind<sdf3>
md: export_rdev(sdf3)
raid5: device sdd3 operational as raid disk 0
raid5: device sdc3 operational as raid disk 4
raid5: device sdb3 operational as raid disk 3
raid5: device sda3 operational as raid disk 2
raid5: allocated 5312kB for md1
raid5: raid level 5 set md1 active with 4 out of 5 devices, algorithm 2
RAID5 conf printout:
--- rd:5 wd:4 fd:1
disk 0, o:1, dev:sdd3
disk 2, o:1, dev:sda3
disk 3, o:1, dev:sdb3
disk 4, o:1, dev:sdc3
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED]
Attempting manual resume
ReiserFS: md0: found reiserfs format "3.6" with standard journal
ReiserFS: md0: using ordered data mode
ReiserFS: md0: journal params: device md0, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md0: checking transaction log (md0)
ReiserFS: md0: Using r5 hash to sort names
ts: Compaq touchscreen protocol output
eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
gameport: EMU10K1 is pci0000:03:02.1/gameport0, io 0x8c00, speed 1205kHz
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:07' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP]
input: PC Speaker as /class/input/input2
ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LAUI] -> GSI 20 (level, low) ->
IRQ 233
PCI: Setting latency timer of device 0000:00:04.0 to 64
intel8x0_measure_ac97_clock: measured 56837 usecs
intel8x0: clocking to 46903
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
GSI 23 sharing vector 0x52 and IRQ 23
ACPI: PCI Interrupt 0000:03:02.0[A] -> Link [LNKD] -> GSI 18 (level, low) ->
IRQ 82
Installing spdif_bug patch: Audigy 2 ZS [SB0350]
Adding 248996k swap on /dev/sda2. Priority:-1 extents:1 across:248996k
Adding 248996k swap on /dev/sdb2. Priority:-2 extents:1 across:248996k
Adding 248996k swap on /dev/sdc2. Priority:-3 extents:1 across:248996k
Adding 248996k swap on /dev/sdd2. Priority:-4 extents:1 across:248996k
loop: loaded (max 8 devices)
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
fuse init (API version 7.7)
ReiserFS: dm-3: found reiserfs format "3.6" with standard journal
ReiserFS: dm-3: using ordered data mode
ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-3: checking transaction log (dm-3)
ReiserFS: dm-3: Using r5 hash to sort names
ReiserFS: dm-2: found reiserfs format "3.6" with standard journal
ReiserFS: dm-2: using ordered data mode
ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-2: checking transaction log (dm-2)
ReiserFS: dm-2: Using r5 hash to sort names
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
ReiserFS: dm-0: using ordered data mode
ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-0: checking transaction log (dm-0)
ReiserFS: dm-0: Using r5 hash to sort names
ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
ReiserFS: dm-1: using ordered data mode
ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-1: checking transaction log (dm-1)
ReiserFS: dm-1: Using r5 hash to sort names
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
ClusterIP Version 0.8 loaded successfully
Bridge firewalling registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
eth0: no IPv6 routers present
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17
GSI 24 sharing vector 0x5A and IRQ 24
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKC] -> GSI 17 (level, low) ->
IRQ 90
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.11 Wed Jun 13 16:33:22
PDT 2007
Losing some ticks... checking if CPU frequency changed.
