On Fri, Sep 07, 2007 at 05:41:51PM +0200, maximilian attems wrote: > On Fri, Sep 07, 2007 at 05:21:24PM +0200, maximilian attems wrote: > ahh just noticed please 2.6.23-rc5-k7 is available and > will be the updated build tomorrow. > (shouldn't make a diff with current build)
I installed 2.6.23-rc5-k7 and bingo: the HD is recognized ! Here are the syslog messages now: Sep 7 13:01:17 monk kernel: scsi0 : SBP-2 IEEE-1394 Sep 7 13:01:17 monk kernel: firewire_sbp2: logged in to sbp2 unit fw1.1 (0 retries) Sep 7 13:01:17 monk kernel: firewire_sbp2: - management_agent_address: 0xfffff0030000 Sep 7 13:01:17 monk kernel: firewire_sbp2: - command_block_agent_address: 0xfffff0100000 Sep 7 13:01:17 monk kernel: firewire_sbp2: - status write address: 0x000100000000 Sep 7 13:01:17 monk kernel: firewire_sbp2: sbp2_scsi_abort Sep 7 13:01:17 monk kernel: scsi 0:0:0:0: Direct-Access WD 5000AAKS Externa 107a PQ: 0 ANSI: 4 Sep 7 13:01:17 monk kernel: sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) Sep 7 13:01:17 monk kernel: sd 0:0:0:0: [sda] Write Protect is off Sep 7 13:01:17 monk kernel: sd 0:0:0:0: [sda] Mode Sense: 11 00 00 00 Sep 7 13:01:17 monk kernel: sd 0:0:0:0: [sda] Cache data unavailable Sep 7 13:01:17 monk kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through Sep 7 13:01:17 monk kernel: sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) Sep 7 13:01:17 monk kernel: sd 0:0:0:0: [sda] Write Protect is off Sep 7 13:01:17 monk kernel: sd 0:0:0:0: [sda] Mode Sense: 11 00 00 00 Sep 7 13:01:17 monk kernel: sd 0:0:0:0: [sda] Cache data unavailable Sep 7 13:01:17 monk kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through Sep 7 13:01:17 monk kernel: sda: sda1 sda2 Sep 7 13:01:17 monk kernel: sd 0:0:0:0: [sda] Attached SCSI disk > also you can now load > modprobe firewire-sbp2 workaround=1 > to enable some workarounds that were in the old sbp2 driver. I tried that but the module wasn't loaded. Here's the error message (from dmesg): firewire_sbp2: Unknown parameter `workaround' Thank you very much, Maks, for the speed-lightning responses and the fix ! Paulo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
