Package: linux-image-2.6.23-rc4-amd64 Version: 2.6.23~rc4-1~experimental.1~snapshot.9433 Followup-For: Bug #438663
see: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=438663 /var/log/dmesg - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - Linux version 2.6.23-rc4-amd64 (Debian 2.6.23~rc4-1~experimental.1~snapshot.9433) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14+1)) #1 SMP Sat Sep 1 00:55:23 UTC 2007 Command line: root=/dev/sdb2 ro video=nvidiafb:ywrap,mtrr vga=791 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000077fc0000 (usable) BIOS-e820: 0000000077fc0000 - 0000000077fce000 (ACPI data) BIOS-e820: 0000000077fce000 - 0000000077ff0000 (ACPI NVS) BIOS-e820: 0000000077ff0000 - 0000000078000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 491456) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP 000FB5A0, 0014 (r0 ACPIAM) ACPI: RSDT 77FC0000, 0030 (r1 A M I OEMRSDT 8000630 MSFT 97) ACPI: FACP 77FC0200, 0084 (r2 A M I OEMFACP 8000630 MSFT 97) ACPI: DSDT 77FC0440, 6087 (r1 A0588 A0588000 0 INTL 20060113) ACPI: FACS 77FCE000, 0040 ACPI: MCFG 77FC0400, 003C (r1 A M I OEMMCFG 8000630 MSFT 97) ACPI: OEMB 77FCE040, 0060 (r1 A M I AMI_OEM 8000630 MSFT 97) Scanning NUMA topology in Northbridge 24 CPU has 2 num_cores No NUMA configuration found Faking a node at 0000000000000000-0000000077fc0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 491456) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-0000000077fc0000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 491456 On node 0 totalpages: 491359 DMA zone: 56 pages used for memmap DMA zone: 1045 pages reserved DMA zone: 2898 pages, LIFO batch:0 DMA32 zone: 6663 pages used for memmap DMA32 zone: 480697 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x508 Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: ASUS MPTABLE: Product ID: MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) Processor #1 I/O APIC #2 at 0xFEC00000. Setting APIC routing to flat Processors: 2 swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 78000000:86c00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 35176 bytes of per cpu data Built 1 zonelists in Node order. Total pages: 483595 Policy zone: DMA32 Kernel command line: root=/dev/sdb2 ro video=nvidiafb:ywrap,mtrr vga=791 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2210.125 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... CPU 0: aperture @ c270000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 1927924k/1965824k available (2066k kernel code, 37512k reserved, 977k data, 304k init) Calibrating delay using timer specific routine.. 4424.07 BogoMIPS (lpj=8848148) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 8ca0) ExtINT not setup in hardware but reported by MP table Using local APIC timer interrupts. result 12557531 Detected 12.557 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4420.40 BogoMIPS (lpj=8840808) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01 Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3) ACPI: Using PIC for interrupt routing Error attaching device data Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:10.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNEA] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNEB] (IRQs *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNEC] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNED] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB0] (IRQs *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 10 11 14 *15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 10 11 14 *15) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMC9] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LSA0] (IRQs 5 *7 10 11 14 15) ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LATA] (IRQs 5 7 10 11 14 15) *0, disabled. ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - AF, should be AE [20070126] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0F03 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C01 pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: RTC can wake from S4 pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:05' and the driver 'system' pnp: 00:05: iomem range 0xfefe0000-0xfefe01ff has been reserved pnp: match found with the PnP device '00:06' and the driver 'system' pnp: 00:06: iomem range 0xdfd80000-0xdfdbffff has been reserved pnp: 00:06: iomem range 0xfee01000-0xfeefffff has been reserved pnp: 00:06: iomem range 0x78000000-0x7fffffff has been reserved pnp: match found with the PnP device '00:07' and the driver 'system' pnp: 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved pnp: 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved pnp: match found with the PnP device '00:0b' and the driver 'system' pnp: 00:0b: ioport range 0xa00-0xa0f has been reserved pnp: 00:0b: ioport range 0xa10-0xa1f has been reserved pnp: 00:0b: ioport range 0xa20-0xa2f has been reserved pnp: 00:0b: ioport range 0xa30-0xa3f has been reserved pnp: match found with the PnP device '00:0c' and the driver 'system' pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved pnp: match found with the PnP device '00:0d' and the driver 'system' pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0d: iomem range 0xc0000-0xcffff has been reserved pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0d: iomem range 0x100000-0x7fffffff could not be reserved PCI: Bridge: 0000:00:02.0 IO window: d000-dfff MEM window: dfe00000-dfefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:10.0 IO window: e000-efff MEM window: dff00000-dfffffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:10.0 to 64 NET: Registered protocol family 2 Time: acpi_pm clocksource has been installed. IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 6291456 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 6257k freed audit: initializing netlink socket (disabled) audit(1188674072.828:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:05.0 PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20000b00000, using 3072k, total 131072k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:08' and the driver 'serial' 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:0a' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 304k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI Exception (processor_core-0797): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0797): AE_NOT_FOUND, Processor Device is not present [20070126] SCSI subsystem initialized ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:0b.0: irq 5, io mem 0xdfdde000 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. libata version 2.21 loaded. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ahci 0000:01:00.0: version 2.3 ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 5 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 5 (level, low) -> IRQ 5 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx pnp: the driver 'ide' has been registered usb 1-1: new full speed USB device using ohci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice usb 1-2: new low speed USB device using ohci_hcd and address 3 ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:01:00.0: flags: 64bit ncq pm led clo pmp pio slum part PCI: Setting latency timer of device 0000:01:00.0 to 64 scsi0 : ahci scsi1 : ahci ata1: SATA max UDMA/133 cmd 0xffffc20000aac100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 5 ata2: SATA max UDMA/133 cmd 0xffffc20000aac180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 5 usb 1-2: configuration #1 chosen from 1 choice ata1: SATA link down (SStatus 0 SControl 300) usb 1-7: new full speed USB device using ohci_hcd and address 4 usb 1-7: configuration #1 chosen from 1 choice hub 1-7:1.0: USB hub found hub 1-7:1.0: 4 ports detected ata2: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 15 PCI: setting IRQ 15 as level-triggered ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 15 (level, low) -> IRQ 15 PCI: Setting latency timer of device 0000:00:14.0 to 64 forcedeth: using HIGHDMA usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver eth0: forcedeth.c: subsystem: 01043:81bc bound to 0000:00:14.0 sata_nv 0000:00:0e.0: version 3.4 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 7 net eth2: device_rename: sysfs_create_symlink failed (-17) udev: renamed network interface eth0 to eth2 PCI: setting IRQ 7 as level-triggered ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 7 (level, low) -> IRQ 7 PCI: Setting latency timer of device 0000:00:0e.0 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x000000000001c800 ctl 0x000000000001c482 bmdma 0x000000000001c000 irq 7 ata4: SATA max UDMA/133 cmd 0x000000000001c400 ctl 0x000000000001c082 bmdma 0x000000000001c008 irq 7 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATAPI: ASUS DRW-1814BLT, 1.04, max UDMA/66 ata4.00: configured for UDMA/66 scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 scsi 3:0:0:0: CD-ROM ASUS DRW-1814BLT 1.04 PQ: 0 ANSI: 5 ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LSA1] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:0f.0 to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0x000000000001bc00 ctl 0x000000000001b882 bmdma 0x000000000001b400 irq 11 ata6: SATA max UDMA/133 cmd 0x000000000001b800 ctl 0x000000000001b482 bmdma 0x000000000001b408 irq 11 ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ATA-7: ST3160812AS, 3.AAD, max UDMA/133 ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata5.00: configured for UDMA/133 ata6: SATA link down (SStatus 0 SControl 300) scsi 4:0:0:0: Direct-Access ATA ST3160812AS 3.AA PQ: 0 ANSI: 5 JMB363: IDE controller at PCI slot 0000:01:00.1 PCI: Enabling device 0000:01:00.1 (0000 -> 0001) ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:01:00.1[B] -> Link [LNEC] -> GSI 10 (level, low) -> IRQ 10 JMB363: chipset revision 2 JMB363: 100% native mode on irq 10 PCI: Setting latency timer of device 0000:01:00.1 to 64 ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... Probing IDE interface ide1... ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 15 ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 15 (level, low) -> IRQ 15 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:0b.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:0b.1 ehci_hcd 0000:00:0b.1: irq 15, io mem 0xdfddfc00 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb 1-1: USB disconnect, address 2 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found firewire_ohci: Added fw-ohci device 0000:04:05.0, OHCI version 1.10 hub 2-0:1.0: 8 ports detected sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>usb 1-2: USB disconnect, address 3 sda1 sda2 NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 NFORCE-MCP51: chipset revision 161 NFORCE-MCP51: not 100% native mode: will probe irqs later NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller ide2: BM-DMA at 0xffa0-0xffa7, BIOS settings: hde:pio, hdf:pio Probing IDE interface ide2... sd 2:0:0:0: [sda] Attached SCSI disk sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb:<6>usb 1-7: USB disconnect, address 4 sdb1 sdb2 sdb3 sd 4:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: Attached scsi generic sg0 type 0 sr 3:0:0:0: Attached scsi generic sg1 type 5 sd 4:0:0:0: Attached scsi generic sg2 type 0 firewire_core: created new fw device fw0 (0 config rom retries, S400) device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usb 2-7: new high speed USB device using ehci_hcd and address 4 usb 2-7: configuration #1 chosen from 1 choice hub 2-7:1.0: USB hub found hub 2-7:1.0: 4 ports detected usb 1-1: new full speed USB device using ohci_hcd and address 5 usb 1-1: configuration #1 chosen from 1 choice usb 1-2: new low speed USB device using ohci_hcd and address 6 usb 1-2: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-2 input: PC Speaker as /class/input/input3 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700 input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:10.1 to 64 hda_codec: Unknown model for AD1988, trying auto-probe from BIOS... Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1 across:1951856k Adding 1951856k swap on /dev/sdb1. Priority:-2 extents:1 across:1951856k EXT3 FS on sdb2, internal journal loop: module loaded it87: Found IT8716F chip at 0xa10, revision 1 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) fuse init (API version 7.8) kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - = - -- Package-specific info: -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.18-5-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, [EMAIL PROTECTED] (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.23-rc4-amd64 depends on: ii e2fsprogs 1.40.2-1 ext2 file system utilities and lib ii initramfs-tools [linux-initr 0.90a tools for generating an initramfs ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo linux-image-2.6.23-rc4-amd64 recommends no packages. -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.23-rc4-amd64/postinst/depmod-error-2.6.23-rc4-amd64: false linux-image-2.6.23-rc4-amd64/postinst/old-dir-initrd-link-2.6.23-rc4-amd64: true linux-image-2.6.23-rc4-amd64/postinst/old-system-map-link-2.6.23-rc4-amd64: true linux-image-2.6.23-rc4-amd64/postinst/depmod-error-initrd-2.6.23-rc4-amd64: false linux-image-2.6.23-rc4-amd64/postinst/create-kimage-link-2.6.23-rc4-amd64: true linux-image-2.6.23-rc4-amd64/preinst/elilo-initrd-2.6.23-rc4-amd64: true linux-image-2.6.23-rc4-amd64/postinst/kimage-is-a-directory: linux-image-2.6.23-rc4-amd64/preinst/lilo-initrd-2.6.23-rc4-amd64: true linux-image-2.6.23-rc4-amd64/preinst/failed-to-move-modules-2.6.23-rc4-amd64: linux-image-2.6.23-rc4-amd64/postinst/bootloader-error-2.6.23-rc4-amd64: linux-image-2.6.23-rc4-amd64/postinst/bootloader-test-error-2.6.23-rc4-amd64: linux-image-2.6.23-rc4-amd64/prerm/removing-running-kernel-2.6.23-rc4-amd64: true linux-image-2.6.23-rc4-amd64/preinst/initrd-2.6.23-rc4-amd64: linux-image-2.6.23-rc4-amd64/preinst/abort-install-2.6.23-rc4-amd64: linux-image-2.6.23-rc4-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.23-rc4-amd64/postinst/old-initrd-link-2.6.23-rc4-amd64: true linux-image-2.6.23-rc4-amd64/preinst/overwriting-modules-2.6.23-rc4-amd64: true linux-image-2.6.23-rc4-amd64/preinst/already-running-this-2.6.23-rc4-amd64: linux-image-2.6.23-rc4-amd64/prerm/would-invalidate-boot-loader-2.6.23-rc4-amd64: true linux-image-2.6.23-rc4-amd64/preinst/abort-overwrite-2.6.23-rc4-amd64: linux-image-2.6.23-rc4-amd64/preinst/bootloader-initrd-2.6.23-rc4-amd64: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
