Benjamin Herrenschmidt <[EMAIL PROTECTED]> writes:
> The log is incomplete... looks like the bcm43xx driver is so verbose, it
> kicked useful things out. Thus I can't see the output from the video
> driver which is the interesting bit...
>
> Also, is it nvidiafb or rivafb ?
>
For a week or so I'm following linux-2.6 trunk kernels (thank's
Maximilian), but the problem I reported and opened Bug#435226 persists.
As Benjamin asked for it the kernel uses nvidiafb and seems to detect
the native resolution as you can see in these lines (I attach a complete
dmesg output in this mail):
...
nvidiafb: Panel is TMDS
fbcvt: [EMAIL PROTECTED]: CVT Name - .786M3-R
...
Also my trick about executing 'fbset 1024x768-60' still works.
Hope this information can help to detect what's happening.
A. Corbi
Using PowerMac machine description
Total memory = 1280MB; using 4096kB for hash table (at cfc00000)
Linux version 2.6.22-1-powerpc (Debian 2.6.22-trunk.1~snapshot.9248) ([EMAIL
PROTECTED]) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 Thu
Aug 2 23:21:13 UTC 2007
Found initrd at 0xc1900000:0xc1f40000
Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
Mapped at 0xfdfc0000
Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000
Processor NAP mode on idle enabled.
PowerMac motherboard: PowerBook G4 12"
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
Entering add_active_range(0, 0, 327680) 0 entries of 256 used
Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
nvram: Checking bank 0...
nvram: gen0=296, gen1=297
nvram: Active bank is: 1
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Top of RAM: 0x50000000, Total RAM: 0x50000000
Memory hole size: 0MB
Zone PFN ranges:
DMA 0 -> 196608
Normal 196608 -> 196608
HighMem 196608 -> 327680
early_node_map[1] active PFN ranges
0: 0 -> 327680
On node 0 totalpages: 327680
DMA zone: 1536 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 195072 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
HighMem zone: 1024 pages used for memmap
HighMem zone: 130048 pages, LIFO batch:31
Built 1 zonelists. Total pages: 325120
Kernel command line: root=/dev/hda3 ro quiet splash
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 64, shift: 6, mask: 3f
mpic: Initializing for 64 sources
PID hash table entries: 4096 (order: 12, 16384 bytes)
GMT Delta read from XPRAM: 0 minutes, DST: off
time_init: decrementer frequency = 18.432000 MHz
time_init: processor frequency = 1499.999994 MHz
Console: colour dummy device 80x25
console handover: boot [udbg0] -> real [tty0]
serial8250_console_init: nothing to do on PowerMac
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
High memory: 524288k
Memory: 1283972k/1310720k available (3356k kernel code, 550060k reserved, 148k
data, 294k bss, 196k init)
Calibrating delay loop... 36.73 BogoMIPS (lpj=73472)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
device-tree: Duplicate name in /cpus/PowerPC,[EMAIL PROTECTED], renamed to
"l2-cache#1"
NET: Registered protocol family 16
KeyWest i2c @0xf8001003 irq 42 /[EMAIL PROTECTED]/[EMAIL PROTECTED]
channel 1 bus /[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]
KeyWest i2c @0x80018000 irq 26 /[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL
PROTECTED]
channel 0 bus /[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL
PROTECTED]
PMU i2c /[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/pmu-i2c
channel 1 bus <multibus>
channel 2 bus <multibus>
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 0 of device 0001:10:18.0
PCI: Cannot allocate resource region 0 of device 0001:10:19.0
Apple USB OHCI 0001:10:18.0 disabled by firmware
Apple USB OHCI 0001:10:19.0 disabled by firmware
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6400k freed
Thermal assist unit not available
Registering PowerMac CPU frequency driver
Low: 749 Mhz, High: 1499 Mhz, Boot: 749 Mhz
audit: initializing netlink socket (disabled)
audit(1186126043.416:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
nvidiafb: Device ID: 10de0329
nvidiafb: CRTC0 analog not found
nvidiafb: CRTC1 analog found
i2c-adapter i2c-0: unable to read EDID block.
i2c-adapter i2c-0: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
nvidiafb: Found OF EDID for head 2
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 1 is currently programmed for DFP
nvidiafb: Using DFP on CRTC 1
nvidiafb: Panel size is 1024 x 768
nvidiafb: Panel is TMDS
fbcvt: [EMAIL PROTECTED]: CVT Name - .786M3-R
nvidia: Backlight initialized (nvidiabl0)
nvidiafb: Flat panel dithering enabled
Console: switching to colour frame buffer device 128x48
nvidiafb: PCI nVidia NV32 framebuffer (64MB @ 0xA0000000)
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
serial8250_init: nothing to do on PowerMac
pmac_zilog: 0.6 (Benjamin Herrenschmidt <[EMAIL PROTECTED]>)
ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
MacIO PCI driver attached to Intrepid chipset
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
adb: starting probe task...
PCI: Enabling device 0002:20:0d.0 (0000 -> 0002)
adb devices: [2]: 2 c4 [7]: 7 1f
ADB keyboard at 2, handler 1
Detected ADB keyboard, type ISO, swapping keys.
input: ADB keyboard as /class/input/input1
input: ADB Powerbook buttons as /class/input/input2
adb: finished probe task...
ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39
Probing IDE interface ide0...
hda: TOSHIBA MK8026GAX, ATA DISK drive
hda: Enabling Ultra DMA 5
ide0 at 0xf101a000-0xf101a007,0xf101a160 on irq 39
ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24
Probing IDE interface ide1...
hdc: MATSHITADVD-R UJ-835E, ATAPI CD/DVD-ROM drive
hdc: Enabling MultiWord DMA 2
ide1 at 0xf1012000-0xf1012007,0xf1012160 on irq 24
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Apple USB OHCI 0001:10:18.0 disabled by firmware
Apple USB OHCI 0001:10:19.0 disabled by firmware
PCI: Enabling device 0001:10:1a.0 (0000 -> 0002)
ohci_hcd 0001:10:1a.0: OHCI Host Controller
ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1
ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Enabling device 0001:10:1b.0 (0000 -> 0002)
ohci_hcd 0001:10:1b.0: OHCI Host Controller
ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
PCI: Enabling device 0001:10:1b.1 (0000 -> 0002)
ohci_hcd 0001:10:1b.1: OHCI Host Controller
ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 3
ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using ohci_hcd and address 2
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
input: PMU as /class/input/input3
Registered led device: pmu-front-led
Freeing unused kernel memory: 196k init
usb 1-1: configuration #1 chosen from 1 choice
PowerMac i2c bus pmu 2 registered
PowerMac i2c bus pmu 1 registered
PowerMac i2c bus mac-io 0 registered
PowerMac i2c bus uni-n 1 registered
usb 1-2: new full speed USB device using ohci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-1.4: new low speed USB device using ohci_hcd and address 3
PCI: Enabling device 0001:10:1b.2 (0004 -> 0006)
ehci_hcd 0001:10:1b.2: EHCI Host Controller
ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 4
usb 2-1.4: configuration #1 chosen from 1 choice
ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
usb 2-1: USB disconnect, address 2
usb 2-1.4: USB disconnect, address 3
PCI: Enabling device 0002:20:0e.0 (0000 -> 0002)
usb 4-1: new high speed USB device using ehci_hcd and address 2
hda: max request size: 512KiB
usb 4-1: configuration #1 chosen from 1 choice
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.10
sungem.c:v0.98 8/24/03 David S. Miller ([EMAIL PROTECTED])
PHY ID: 4061e4, addr: 0
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:72:42:50
eth0: Found BCM5221 PHY
hda: 156301488 sectors (80026 MB), CHS=16383/255/63, UDMA(100)
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.20
hda: cache flushes supported
hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7
usb 4-1.4: new low speed USB device using ehci_hcd and address 3
usb 4-1.4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: HID 05ac:1000 as /class/input/input4
input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1
input: HID 05ac:1000 as /class/input/input5
input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1
input: Logitech USB Receiver as /class/input/input6
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0001:10:1b.2-1.4
drivers/hid/usbhid/hid-core.c: Fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /class/input/input7
input,hiddev0: USB HID v1.10 Mouse [Logitech USB Receiver] on
usb-0001:10:1b.2-1.4
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
firewire_core: created new fw device fw0 (0 config rom retries)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED]
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected Apple UniNorth 2 chipset
agpgart: configuring for size idx: 8
agpgart: AGP aperture is 32M @ 0x0
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]>
bcm43xx driver
PCI: Enabling device 0001:10:12.0 (0004 -> 0006)
bcm43xx: Chip ID 0x4306, rev 0x3
bcm43xx: Number of cores: 5
bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243
bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243
bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243
bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243
bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243
bcm43xx: PHY connected
bcm43xx: Detected PHY: Analog: 2, Type 2, Revision 2
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
input: appletouch as /class/input/input8
usbcore: registered new interface driver appletouch
snd-aoa-fabric-layout: found bus with layout 72
snd-aoa-fabric-layout: Using PMF GPIOs
snd-aoa-codec-tas: found tas3004
snd-aoa-fabric-layout: can use this codec
snd-aoa-codec-tas: tas found, addr 0x35 on /[EMAIL PROTECTED]/[EMAIL
PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]
Adding 2441396k swap on /dev/hda6. Priority:-1 extents:1 across:2441396k
EXT3 FS on hda3, internal journal
loop: module loaded
SCSI subsystem initialized
adt746x: version 1 (supported)
adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1
sensor 0: HDD BOTTOMSIDE
sensor 1: CPU TOPSIDE
sensor 2: GPU ON DIE
adt746x: ADT7467 initializing
adt746x: Lowering max temperatures from 73, 80, 109 to 70, 50, 70
fuse init (API version 7.8)
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
snd-powermac no longer handles any machines with a layout-id property in the
device-tree, use snd-aoa.
NET: Registered protocol family 15
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
lp: driver loaded but no devices found
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62
usb 1-1: USB disconnect, address 2
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
usb 1-1: new full speed USB device using ohci_hcd and address 4
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x122, pl 0x99 (2005-01-22 22:40:08)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
usb 1-1: configuration #1 chosen from 1 choice
bcm43xx: Chip initialized
bcm43xx: 30-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
ADDRCONF(NETDEV_UP): eth2: link is not ready
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
ADDRCONF(NETDEV_UP): eth1: link is not ready
SoftMAC: Open Authentication completed with 00:40:10:10:00:03
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
hda: Enabling Ultra DMA 5
eth2: no IPv6 routers present
ondemand governor failed to load due to too long transition latency
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: Radio turned off
bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64
bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512
bcm43xx: DMA-32 0x0220 (TX) max used slots: 1/512
bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512
bcm43xx: PHY connected
bcm43xx: Microcode rev 0x122, pl 0x99 (2005-01-22 22:40:08)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: Chip initialized
bcm43xx: 30-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
ADDRCONF(NETDEV_UP): eth2: link is not ready
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Open Authentication completed with 00:40:10:10:00:03
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
eth2: no IPv6 routers present
