Package: linux-image-2.6.20-1-amd64
Version: 2.6.20-3
Severity: normal
Hi!
It seems I'm not able to use I2C probes on a box with an ASUS P5B-VM
motherboard. I think the appropriate modules are loaded (see below),
but, nonetheless:
$ ls -altrF /sys/bus/i2c/devices/
total 0
drwxr-xr-x 4 root root 0 2007-06-10 16:21 ../
drwxr-xr-x 2 root root 0 2007-06-10 16:21 ./
What's wrong?
What did I fail to understand?
-- Package-specific info:
** Version: Linux version 2.6.20-1-amd64 (Debian 2.6.20-3) ([EMAIL PROTECTED])
(gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Apr 24
21:10:58 UTC 2007
** Not tainted
** Kernel log:
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
JMB363: IDE controller at PCI slot 0000:03:00.1
PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
JMB363: chipset revision 2
JMB363: 100% native mode on irq 17
PCI: Setting latency timer of device 0000:03:00.1 to 64
ide2: BM-DMA at 0xb400-0xb407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xb408-0xb40f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000e015d5]
hde: LITE-ON DVDRW SOHW-1673S, ATAPI CD/DVD-ROM drive
hde: hw_config=0000
hde: hw_config=0000
ide2 at 0xbc00-0xbc07,0xb882 on irq 17
Probing IDE interface ide3...
ata_piix 0000:00:1f.2: version 2.00ac7
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xE880 ctl 0xE802 bmdma 0xE080 irq 19
ata2: SATA max UDMA/133 cmd 0xE480 ctl 0xE402 bmdma 0xE088 irq 19
scsi0 : ata_piix
ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ata_piix
ATA: abnormal status 0x7F on port 0xE487
scsi 0:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5
ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ata3: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xC800 irq 19
ata4: SATA max UDMA/133 cmd 0xCC00 ctl 0xC882 bmdma 0xC808 irq 19
scsi2 : ata_piix
ATA: abnormal status 0x7F on port 0xD087
scsi3 : ata_piix
ATA: abnormal status 0x7F on port 0xCC07
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sda:<6>hde: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache<6>hde:
hw_config=0000
, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
sda1 sda2 < sda5 >
sd 0:0:0:0: Attached scsi disk sda
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED]
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
input: PC Speaker as /class/input/input2
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:0b' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
agpgart: Detected an Intel 965G Chipset.
agpgart: Unknown page table size, assuming 512KB
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
PCI: Enabling device 0000:00:1f.3 (0001 -> 0003)
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
EXT3 FS on dm-1, internal journal
loop: loaded (max 8 devices)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1953784k swap on /dev/mapper/homebrew-swap_1. Priority:-1 extents:1
across:1953784k
r8169: eth1: link up
r8169: eth1: link up
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized i915 1.6.0 20060119 on minor 0
** Loaded modules:
Module Size Used by
nls_iso8859_1 9856 1
nls_cp437 11520 1
vfat 18176 1
fat 58416 1 vfat
i915 30592 2
drm 99112 3 i915
button 13344 0
ac 10248 0
battery 15368 0
sbp2 28676 0
loop 22288 0
i2c_i801 13204 0
serio_raw 12036 0
eth1394 24840 0
iTCO_wdt 16080 0
i2c_core 28544 1 i2c_i801
psmouse 44432 0
parport_pc 41768 0
parport 44556 1 parport_pc
intel_agp 30656 1
evdev 15488 0
tsdev 13056 0
pcspkr 7936 0
snd_hda_intel 26272 0
snd_hda_codec 200192 1 snd_hda_intel
snd_pcm 89736 2 snd_hda_intel,snd_hda_codec
snd_timer 28680 1 snd_pcm
snd 66152 4 snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore 13344 1 snd
snd_page_alloc 14864 2 snd_hda_intel,snd_pcm
ext3 137360 6
jbd 68336 1 ext3
mbcache 14216 1 ext3
dm_mirror 25920 0
dm_snapshot 21448 0
dm_mod 65168 15 dm_mirror,dm_snapshot
ide_cd 45344 0
cdrom 40360 1 ide_cd
sd_mod 26240 3
ahci 28804 0
ata_piix 20484 2
usbhid 29856 0
hid 28800 1 usbhid
ata_generic 13572 0
libata 116000 3 ahci,ata_piix,ata_generic
scsi_mod 160824 4 sbp2,sd_mod,ahci,libata
jmicron 9344 0 [permanent]
ohci1394 39240 0
ieee1394 362872 3 sbp2,eth1394,ohci1394
generic 10500 0 [permanent]
floppy 67112 1
r8169 36872 0
ide_core 149376 3 ide_cd,jmicron,generic
ehci_hcd 36748 0
uhci_hcd 29344 0
thermal 20112 0
processor 39144 1 thermal
fan 9864 0
** PCI devices:
not available
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.20-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.20-1-amd64 depends on:
ii e2fsprog 1.39+1.40-WIP-2006.11.14+dfsg-2 ext2 file system utilities and lib
ii initramf 0.88 tools for generating an initramfs
ii module-i 3.3-pre11-1 tools for managing Linux kernel mo
linux-image-2.6.20-1-amd64 recommends no packages.
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.20-1-amd64/prerm/would-invalidate-boot-loader-2.6.20-1-amd64:
true
linux-image-2.6.20-1-amd64/postinst/old-dir-initrd-link-2.6.20-1-amd64: true
linux-image-2.6.20-1-amd64/prerm/removing-running-kernel-2.6.20-1-amd64: true
linux-image-2.6.20-1-amd64/preinst/lilo-initrd-2.6.20-1-amd64: true
linux-image-2.6.20-1-amd64/postinst/create-kimage-link-2.6.20-1-amd64: true
linux-image-2.6.20-1-amd64/preinst/elilo-initrd-2.6.20-1-amd64: true
linux-image-2.6.20-1-amd64/preinst/abort-overwrite-2.6.20-1-amd64:
linux-image-2.6.20-1-amd64/preinst/initrd-2.6.20-1-amd64:
linux-image-2.6.20-1-amd64/postinst/old-initrd-link-2.6.20-1-amd64: true
linux-image-2.6.20-1-amd64/postinst/old-system-map-link-2.6.20-1-amd64: true
linux-image-2.6.20-1-amd64/postinst/bootloader-error-2.6.20-1-amd64:
linux-image-2.6.20-1-amd64/postinst/depmod-error-2.6.20-1-amd64: false
linux-image-2.6.20-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.20-1-amd64/postinst/bootloader-test-error-2.6.20-1-amd64:
linux-image-2.6.20-1-amd64/preinst/bootloader-initrd-2.6.20-1-amd64: true
linux-image-2.6.20-1-amd64/preinst/failed-to-move-modules-2.6.20-1-amd64:
linux-image-2.6.20-1-amd64/preinst/overwriting-modules-2.6.20-1-amd64: true
linux-image-2.6.20-1-amd64/preinst/abort-install-2.6.20-1-amd64:
linux-image-2.6.20-1-amd64/postinst/depmod-error-initrd-2.6.20-1-amd64: false
linux-image-2.6.20-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.20-1-amd64/preinst/already-running-this-2.6.20-1-amd64:
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
