On Mon, Mar 19, 2007 at 01:09:38PM +0100, Svante Signell wrote: > I have also run lilo manually several times, e.g lilo -v shows: > LILO version 22.8, Copyright (C) 1992-1998 Werner Almesberger > Development beyond version 21 Copyright (C) 1999-2006 John Coffman > Released 19-Feb-2007, and compiled at 10:11:20 on Mar 4 2007 > Debian GNU/Linux > > Reading boot sector from /dev/hda1 > Using MENU secondary loader > Calling map_insert_data > > Boot image: /boot/vmlinuz-2.6.18-4-686 > Mapping RAM disk /boot/initrd.img-2.6.18-4-686 > Added 2618-4-686 > > Boot image: /boot/vmlinuz-2.6.18-3-686 > Mapping RAM disk /boot/initrd.img-2.6.18-3-686 > Added 2618-3-686 * > > Boot image: /boot/vmlinuz-2.6.17-2-686 > Mapping RAM disk /boot/initrd.img-2.6.17-2-686 > Added 2617-2-686 > > Writing boot sector. > /boot/boot.0301 exists - no boot sector backup copy made. > > Excerpt from lilo.conf: (olny uncommented parts) > > # Support LBA for large hard disks. > # > lba32 > > # Overrides the default mapping between harddisk names and the BIOS' > # harddisk order. Use with caution. > #disk=/dev/sda > # bios=0x80 > #disk=/dev/hda > # bios=0x81 > > # Specifies the boot device. This is where Lilo installs its boot > # block. It can be either a partition, or the raw device, in which > # case it installs in the MBR, and will overwrite the current MBR. > # > boot=/dev/hda1
shouldn't boot be /dev/hda? > # Specifies the device that should be mounted as root. (`/') > # > root=/dev/hda1 > > # Specifies the location of the map file > # > map=/boot/map > prompt > delay=100 > timeout=100 > > # Specifies the VGA text mode at boot time. (normal, extended, ask, > <mode>) > vga=normal > # Kernel command line options that apply to all installed images go > # here. See: The `boot-prompt-HOWO' and `kernel-parameters.txt' in > # the Linux kernel `Documentation' directory. > # > # append="" > > # Boot up Linux by default. > # > #default=2618-4-686; does not boot!! > default=2618-3-686 > > Removed the lines given before! > -- maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
