Your message dated Sat, 10 Mar 2007 10:06:11 +0100
with message-id <[EMAIL PROTECTED]>
and subject line Bug#406466: linux-image-2.6.18-3-k7: Kernel Crash with sky2
driver. System freeze
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: linux-image-2.6.18-3-k7
Version: 2.6.18-7
Severity: critical
Justification: breaks the whole system
Hello together
I found a new (hopefully) bug regarding the sky2 driver. From time to
time my system looks up.
Fortunatly I was able to get the messages from the kernel when the
system freezes.
I'm not shure if the hardware is faulty, but I had no such problems with
the older 2.6.17 kernel execpt the sky lookup bug
#391382.
Thanks for your help
Matthias Kreis
Here are the information:
sky2 0000:05:00.0: pci hw error (0xffff)
sky2 0000:05:00.0: pci express error (0xffffffff)
sky2 eth0: hw error interrupt status 0xffffffff
sky2 eth0: ram data read parity error
sky2 eth0: ram data write parity error
sky2 eth0: MAC parity error
sky2 eth0: RX parity error
sky2 eth0: TCP segmentation error
sky2 <NULL>: hw error interrupt status 0xffffff
sky2 <NULL>: ram data read parity error
sky2 eth0: remote fault<1>BUG: unable to handle kernel NULL pointer
dereference at virtual address 0000002c
printing eip:
f8a092a8
*pde = 00000000
Oops: 0000 [#1]
SMP
Modules linked in: nls_utf8 nls_cp437 vfat fat vmnet vmmon nvidia ppdev
lp button ac battery ipv6 nfs lockd nfs_acl sunrpc sk98lin
ext2 ide_disk snd_seq_dum$CPU: 0
EIP: 0060:[<f8a092a8>] Tainted: P VLI
EFLAGS: 00010282 (2.6.18-3-k7 #1)
EIP is at sky2_phy_intr+0xf/0x1ca [sky2]
eax: c19077c0 ebx: 00000001 ecx: 00000000 edx: 00000001
esi: ffffffff edi: 00000000 ebp: c19077c0 esp: ce839f10
ds: 007b es: 007b ss: 0068
Process firefox-bin (pid: 3723, ti=ce838000 task=f24d8550 task.ti=ce838000)
Stack: ffff0202 c011ffff 00ffff01 00000000 00000001 f8a09038 00042010
ffffffff
c1807b40 0006782c f8a09fff ce839f88 f349d000 c19077c0 00000040
00000001
ffffffff 00000286 c01255ac 00000100 c0367bc0 00000286 00000000
00000000
Call Trace:
[<c011ffff>] do_exit+0x644/0x730
[<f8a09038>] sky2_hw_error+0xe5/0x110 [sky2]
[<f8a09fff>] sky2_poll+0x191/0x947 [sky2]
[<c01255ac>] lock_timer_base+0x15/0x2f
[<c022d119>] net_rx_action+0x92/0x17d
[<c01219b8>] __do_softirq+0x5a/0xbb
[<c0121a4f>] do_softirq+0x36/0x3a
[<c0103723>] apic_timer_interrupt+0x1f/0x24
Code: a8 00 00 00 50 ff 73 04 68 21 c5 a0 f8 e8 da 47 71 c7 83 c4 14 59
5b 5b 5e 5f 5d c3 55 89 c5 57 56 53 89 d3 83 ec 18 8b 7c 90
08 <8b> 47 2c a8 02 0f 8$EIP: [<f8a092a8>] sky2_phy_intr+0xf/0x1ca
[sky2] SS:ESP 0068:ce839f10
<0>Kernel panic - not syncing: Fatal exception in interrupt
Hardware Info:
lspci -vv
00:00.0 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
Subsystem: ASUSTeK Computer Inc. Unknown device 815d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
00:00.1 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.2 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.3 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.4 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.5 PIC: VIA Technologies, Inc. K8T890 I/O APIC Interrupt Controller
(prog-if 20 [IO(X)-APIC])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.7 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800/K8T890 South] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge
Controller (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR+ <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: d8000000-daffffff
Prefetchable memory behind bridge: c0000000-cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:03.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge
Controller (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:03.1 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge
Controller (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:03.2 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge
Controller (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: db000000-dcffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:03.3 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge
Controller (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID
Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V
Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin B routed to IRQ 74
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at c400 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at d000 [size=16]
Region 5: I/O ports at d400 [size=256]
Capabilities: <access denied>
00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master
SecP PriP])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 74
Region 4: I/O ports at d800 [size=16]
Capabilities: <access denied>
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 66
Region 4: I/O ports at dc00 [size=32]
Capabilities: <access denied>
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 66
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 66
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 66
Region 4: I/O ports at e800 [size=32]
Capabilities: <access denied>
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if
20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 66
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South]
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: ASUSTeK Computer Inc. Unknown device 8174
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 98
Region 0: I/O ports at ec00 [size=256]
Capabilities: <access denied>
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem
Controller (rev 80)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 98
Region 0: I/O ports at 1000 [disabled] [size=256]
Capabilities: <access denied>
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: <access denied>
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
02:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600
GS] (rev a1) (prog-if 00 [VGA])
Subsystem: Micro-Star International Co., Ltd. NX7600GS-T2D256EH
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 106
Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d9000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at a000 [size=128]
[virtual] Expansion ROM at da000000 [disabled] [size=128K]
Capabilities: <access denied>
05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E
Gigabit Ethernet Controller (rev 19)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit
Ethernet controller PCIe (Asus)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 90
Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at b000 [size=256]
Expansion ROM at db000000 [disabled] [size=128K]
Capabilities: <access denied>
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (1001, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-3-k7
Locale: LANG=de_CH.UTF-8, LC_CTYPE=de_CH.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6.18-3-k7 depends on:
ii coreutils 5.97-5 The GNU core utilities
ii debconf [debconf-2.0] 1.5.11 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.85e tools for generating an
initramfs
ii module-init-tools 3.3-pre3-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.18-3-k7 recommends:
ii libc6-i686 2.3.6.ds1-8 GNU C Library: Shared
libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.18-3-k7/postinst/depmod-error-initrd-2.6.18-3-k7: false
linux-image-2.6.18-3-k7/postinst/old-system-map-link-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/postinst/old-initrd-link-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/postinst/depmod-error-2.6.18-3-k7: false
linux-image-2.6.18-3-k7/postinst/kimage-is-a-directory:
linux-image-2.6.18-3-k7/prerm/removing-running-kernel-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/postinst/bootloader-error-2.6.18-3-k7:
linux-image-2.6.18-3-k7/preinst/elilo-initrd-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/postinst/old-dir-initrd-link-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/preinst/overwriting-modules-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/preinst/lilo-has-ramdisk:
linux-image-2.6.18-3-k7/preinst/abort-install-2.6.18-3-k7:
linux-image-2.6.18-3-k7/preinst/bootloader-initrd-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/preinst/lilo-initrd-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/preinst/abort-overwrite-2.6.18-3-k7:
linux-image-2.6.18-3-k7/preinst/already-running-this-2.6.18-3-k7:
linux-image-2.6.18-3-k7/prerm/would-invalidate-boot-loader-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/preinst/failed-to-move-modules-2.6.18-3-k7:
linux-image-2.6.18-3-k7/postinst/create-kimage-link-2.6.18-3-k7: true
linux-image-2.6.18-3-k7/preinst/initrd-2.6.18-3-k7:
linux-image-2.6.18-3-k7/postinst/bootloader-test-error-2.6.18-3-k7:
--- End Message ---
--- Begin Message ---
On Thu, 01 Mar 2007, Matthias Kreis wrote:
> Hello
>
> In the meantime I have sold the mainboard. During installation of
> windows we got also some failures of the sky driver. It may be possible
> that the hardware on that board is faulty. The network also stopped
> working after a few minutes.
>
> Regards Matthias Kreis
faulty hardware is bad, closing as bug reporter no longer has board.
we still will add sky2 patches for next linux-image release,
but there seem enough other bug reports that are open.
best regards
--
maks
--- End Message ---
