Package: linux-image-2.6.18-4-686 Version: 2.6.18.dfsg.1-11 Severity: serious
It feels bad to open a RC bug on the kernel at this time, and I've thought about it more than once, but *I* do not see a reason to downgrade the severity. Feel free to do so if you find one ;-) I have recently installed etch freshly on a IBM/Lenovo Thinkpad T43p, see also my (successfull) installation report in #410710. It came with the last kernel version, and was updated now to also have 2.6.18-4-686. However, the new kernel does not boot. If this is really due to a bug in the kernel, I think it is RC because I don't have any opportunity to get security or other kernel updates from Debian. Here's is what I wrote down from the screen I see after selecting the new kernel in grub: assign_interrupt_mode Found MSI capability [...isapnp stuff] [...Serial stuff] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 225 ACPI: PCI interrupt for device 0000:00:1e.3 disabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 s5) VFS: Cannot open root device "mapper/riesling-root" or unknown-block(0,0) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) For comparison, I attach below the dmesg output after booting with the old linux-image-2.6.18-3-686. I also attach grub's menu.lst, but here are the relevant entries: ## ## End Default Options ## title Debian GNU/Linux, kernel 2.6.18-4-686 root (hd0,0) kernel /vmlinuz-2.6.18-4-686 root=/dev/mapper/riesling-root ro initrd /initrd.img-2.6.18-4-686 savedefault title Debian GNU/Linux, kernel 2.6.18-4-686 (single-user mode) root (hd0,0) kernel /vmlinuz-2.6.18-4-686 root=/dev/mapper/riesling-root ro single initrd /initrd.img-2.6.18-4-686 savedefault title Debian GNU/Linux, kernel 2.6.18-3-686 root (hd0,0) kernel /vmlinuz-2.6.18-3-686 root=/dev/mapper/riesling-root ro initrd /initrd.img-2.6.18-3-686 savedefault This looks identical to me except for the s/3/4/, so I don't see a configuration error. This is the mount scheme: $ mount /dev/mapper/riesling-root on / type ext3 (rw,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) procbususb on /proc/bus/usb type usbfs (rw) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/sda1 on /boot type ext3 (rw) /dev/mapper/riesling-home on /home type ext3 (rw) /dev/mapper/riesling-tmp on /tmp type ext3 (rw) /dev/mapper/riesling-usr on /usr type ext3 (rw) /dev/mapper/riesling-var on /var type ext3 (rw) $ And that is the listing of /boot: /boot$ ls -l total 19514 -rw-r--r-- 1 root root 71331 2006-12-04 16:52 config-2.6.18-3-686 -rw-r--r-- 1 root root 70781 2007-02-21 16:18 config-2.6.18-4-686 drwxr-xr-x 3 root root 1024 2007-02-28 17:56 grub -rw-r--r-- 1 root root 5390366 2007-02-11 00:31 initrd.img-2.6.18-3-686 -rw-r--r-- 1 root root 4985708 2007-02-10 23:53 initrd.img-2.6.18-3-686.bak -rw-r--r-- 1 root root 0 2007-03-03 18:07 initrd.img-2.6.18-4-686 -rw-r--r-- 1 root root 5393993 2007-02-28 17:56 initrd.img-2.6.18-4-686.dpkg-bak drwx------ 2 root root 12288 2007-02-10 23:25 lost+found -rw-r--r-- 1 root root 720074 2006-12-04 23:24 System.map-2.6.18-3-686 -rw-r--r-- 1 root root 722037 2007-02-21 22:39 System.map-2.6.18-4-686 -rw-r--r-- 1 root root 1259920 2006-12-04 23:24 vmlinuz-2.6.18-3-686 -rw-r--r-- 1 root root 1261131 2007-02-21 22:39 vmlinuz-2.6.18-4-686 Do you need more information? lspci? vgdisplay? Regards, Frank -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (500, 'testing'), (99, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-686 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages linux-image-2.6.18-4-686 depends on: ii coreutils 5.97-5.3 The GNU core utilities ii debconf [debconf-2.0] 1.5.11 Debian configuration management sy ii initramfs-tools [linux-initra 0.85e tools for generating an initramfs ii module-init-tools 3.3-pre4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.18-4-686 recommends: ii libc6-i686 2.3.6.ds1-11 GNU C Library: Shared libraries [i -- debconf information: linux-image-2.6.18-4-686/preinst/failed-to-move-modules-2.6.18-4-686: linux-image-2.6.18-4-686/preinst/lilo-initrd-2.6.18-4-686: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.18-4-686/preinst/elilo-initrd-2.6.18-4-686: true linux-image-2.6.18-4-686/preinst/overwriting-modules-2.6.18-4-686: true linux-image-2.6.18-4-686/prerm/removing-running-kernel-2.6.18-4-686: true linux-image-2.6.18-4-686/prerm/would-invalidate-boot-loader-2.6.18-4-686: true linux-image-2.6.18-4-686/postinst/bootloader-test-error-2.6.18-4-686: linux-image-2.6.18-4-686/preinst/abort-overwrite-2.6.18-4-686: linux-image-2.6.18-4-686/postinst/old-system-map-link-2.6.18-4-686: true linux-image-2.6.18-4-686/postinst/depmod-error-2.6.18-4-686: false linux-image-2.6.18-4-686/preinst/abort-install-2.6.18-4-686: linux-image-2.6.18-4-686/preinst/lilo-has-ramdisk: linux-image-2.6.18-4-686/postinst/bootloader-error-2.6.18-4-686: linux-image-2.6.18-4-686/postinst/depmod-error-initrd-2.6.18-4-686: false linux-image-2.6.18-4-686/postinst/old-initrd-link-2.6.18-4-686: true linux-image-2.6.18-4-686/preinst/bootloader-initrd-2.6.18-4-686: true linux-image-2.6.18-4-686/preinst/already-running-this-2.6.18-4-686: linux-image-2.6.18-4-686/preinst/initrd-2.6.18-4-686: linux-image-2.6.18-4-686/postinst/create-kimage-link-2.6.18-4-686: true linux-image-2.6.18-4-686/postinst/old-dir-initrd-link-2.6.18-4-686: true linux-image-2.6.18-4-686/postinst/kimage-is-a-directory: -- Dr. Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Linux version 2.6.18-3-686 (Debian 2.6.18-7) ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) BIOS-e820: 000000003fee0000 - 000000003fef5000 (ACPI data) BIOS-e820: 000000003fef5000 - 000000003ff00000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 126MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 261856 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32480 pages, LIFO batch:7 DMI present. ACPI: RSDP (v002 IBM ) @ 0x000f6c10 ACPI: XSDT (v001 IBM TP-1Y 0x00001220 LTP 0x00000000) @ 0x3fee6ff2 ACPI: FADT (v003 IBM TP-1Y 0x00001220 IBM 0x00000001) @ 0x3fee7100 ACPI: SSDT (v001 IBM TP-1Y 0x00001220 MSFT 0x0100000e) @ 0x3fee72b4 ACPI: ECDT (v001 IBM TP-1Y 0x00001220 IBM 0x00000001) @ 0x3fef4def ACPI: TCPA (v001 IBM TP-1Y 0x00001220 PTL 0x00000001) @ 0x3fef4e41 ACPI: MADT (v001 IBM TP-1Y 0x00001220 IBM 0x00000001) @ 0x3fef4e73 ACPI: MCFG (v001 IBM TP-1Y 0x00001220 IBM 0x00000001) @ 0x3fef4ecd ACPI: BOOT (v001 IBM TP-1Y 0x00001220 LTP 0x00000001) @ 0x3fef4fd8 ACPI: DSDT (v001 IBM TP-1Y 0x00001220 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Detected 1862.262 MHz processor. Built 1 zonelists. Total pages: 261856 Kernel command line: root=/dev/mapper/riesling-root ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1029804k/1047424k available (1543k kernel code, 16932k reserved, 574k data, 196k init, 129920k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3728.09 BogoMIPS (lpj=7456197) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed ACPI: Core revision 20060707 CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 Total of 1 processors activated (3728.09 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs migration_cost=0 checking if image is initramfs... it is Freeing initrd memory: 5264k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Found ECDT ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC] (gpe 28) interrupt mode. ACPI: Power Resource [PUBS] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: a8100000-a81fffff PREFETCH window: c0000000-c7ffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: a8200000-a82fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: 4000-4fff MEM window: a8300000-a83fffff PREFETCH window: c8000000-c80fffff PCI: Bus 5, cardbus bridge: 0000:04:00.0 IO window: 00005000-000050ff IO window: 00005400-000054ff PREFETCH window: d0000000-d1ffffff MEM window: aa000000-abffffff PCI: Bridge: 0000:00:1e.0 IO window: 5000-8fff MEM window: a8400000-b7ffffff PREFETCH window: d0000000-d7ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x35 set to 0x1 audit: initializing netlink socket (disabled) audit(1173077190.868:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled pnp: Device 00:09 activated. 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 225 ACPI: PCI interrupt for device 0000:00:1e.3 disabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 196k freed Time: tsc clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (54 C) usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 233, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Time: acpi_pm clocksource has been installed. ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 50, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 58, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 58, io mem 0xa8000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 2-1: new low speed USB device using uhci_hcd and address 2 tg3.c:v3.65 (August 07, 2006) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:02:00.0 to 64 SCSI subsystem initialized libata version 2.00 loaded. eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:10:c6:ce:62:22 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] ahci 0000:00:1f.2: version 2.0 ahci: probe of 0000:00:1f.2 failed with error -12 ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] PCI: Enabling device 0000:00:1f.2 (0000 -> 0001) PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18C0 irq 14 scsi0 : ata_piix ata1.00: ATA-6, max UDMA/100, 156301488 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: applying bridge limits ata1.00: configured for UDMA/100 Vendor: ATA Model: TOSHIBA MK8032GA Rev: AB31 Type: Direct-Access ANSI SCSI revision: 05 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18C8 irq 15 scsi1 : ata_piix ata2.00: ATAPI, max UDMA/33 usb 2-1: new low speed USB device using uhci_hcd and address 3 ata2.00: configured for UDMA/33 Vendor: MATSHITA Model: DVD-RAM UJ-822S Rev: 1.61 Type: CD-ROM ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 <<6>usb 2-1: configuration #1 chosen from 1 choice sda5 > sd 0:0:0:0: Attached scsi disk sda usb 3-2: new full speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ide0: I/O resource 0x1F0-0x1F7 not free. ide0: ports already in use, skipping probe ide1: I/O resource 0x170-0x177 not free. ide1: ports already in use, skipping probe device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED] Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ts: Compaq touchscreen protocol output sr0: scsi3-mmc drive: 31x/31x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: AGP aperture is 256M @ 0x0 intel_rng: FWH not detected input: PC Speaker as /class/input/input2 Yenta: CardBus bridge found at 0000:04:00.0 [1014:056c] parport: PnPBIOS parport detected. parport0: PC-style at 0x3bc (0x7bc), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Real Time Clock Driver v1.12ac irda_init() NET: Registered protocol family 23 Yenta: ISA IRQ mask 0x0438, PCI irq 169 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff cs: IO port probe 0x5000-0x8fff: clean. pcmcia: parent PCI bridge Memory window: 0xa8400000 - 0xb7ffffff pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1e.2 to 64 cs: IO port probe 0x100-0x3af: excluding 0x370-0x377 cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input3 pnp: Device 00:0b activated. nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. nsc-ircc, chip->init nsc-ircc, Found chip at base=0x02e nsc-ircc, driver loaded (Dag Brattli) IrDA: Registered device irda0 nsc-ircc, Found dongle: No dongle connected nsc_ircc_init_dongle_interface(), No dongle connected intel8x0_measure_ac97_clock: measured 55497 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 225 PCI: Enabling device 0000:00:1e.3 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1e.3 to 64 MC'97 1 converters and GPIO not ready (0xff00) osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ st: Version 20050830, fixed bufsize 32768, s/g segs 256 SCSI Media Changer driver v0.25 EXT3 FS on dm-0, internal journal loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2719736k swap on /dev/mapper/riesling-swap_1. Priority:-1 extents:1 across:2719736k pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver IBM TrackPoint firmware: 0x0e, buttons: 3/3 PM: Writing back config space on device 0000:02:00.0 at offset c (was f6ff0000, writing 0) ADDRCONF(NETDEV_UP): eth0: link is not ready input: TPPS/2 IBM TrackPoint as /class/input/input4 tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [AC] (on-line) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver Non-volatile memory driver v1.2 input: /usr/sbin/thinkpad-keys as /class/input/input5 Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 [drm] Initialized radeon 1.25.0 20060524 on minor 0 [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs eth0: no IPv6 routers present
# menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not change this entry to 'saved' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 5 # Pretty colours color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=/dev/mapper/riesling-root ro ## default grub root device ## e.g. groot=(hd0,0) # groot=(hd0,0) ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions= ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(single-user) single # altoptions=(single-user mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## ## End Default Options ## title Debian GNU/Linux, kernel 2.6.18-4-686 root (hd0,0) kernel /vmlinuz-2.6.18-4-686 root=/dev/mapper/riesling-root ro initrd /initrd.img-2.6.18-4-686 savedefault title Debian GNU/Linux, kernel 2.6.18-4-686 (single-user mode) root (hd0,0) kernel /vmlinuz-2.6.18-4-686 root=/dev/mapper/riesling-root ro single initrd /initrd.img-2.6.18-4-686 savedefault title Debian GNU/Linux, kernel 2.6.18-3-686 root (hd0,0) kernel /vmlinuz-2.6.18-3-686 root=/dev/mapper/riesling-root ro initrd /initrd.img-2.6.18-3-686 savedefault title Debian GNU/Linux, kernel 2.6.18-3-686 (single-user mode) root (hd0,0) kernel /vmlinuz-2.6.18-3-686 root=/dev/mapper/riesling-root ro single initrd /initrd.img-2.6.18-3-686 savedefault ### END DEBIAN AUTOMAGIC KERNELS LIST # This is a divider, added to separate the menu items below from the Debian # ones. title Other operating systems: root # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sdb2. title Debian GNU/Linux (3.1) (on /dev/sdb2) root (hd1,1) kernel /boot/vmlinuz-2.6.10 root=/dev/sdb2 initrd /boot/initrd.img-2.6.10 savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sdb2. title Debian GNU/Linux (3.1) (on /dev/sdb2) root (hd1,1) kernel /boot/vmlinuz-2.6.14 root=/dev/sdb2 savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sdb2. title Debian GNU/Linux (3.1) (on /dev/sdb2) root (hd1,1) kernel /boot/vmlinuz-2.6.15-1-686 root=/dev/sdb2 initrd /boot/initrd.img-2.6.15-1-686 savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sdb2. title Debian GNU/Linux (3.1) (on /dev/sdb2) root (hd1,1) kernel /boot/vmlinuz-2.6.16-2-686 root=/dev/sdb2 initrd /boot/initrd.img-2.6.16-2-686 savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sdb2. title Debian GNU/Linux (3.1) (on /dev/sdb2) root (hd1,1) kernel /boot/vmlinuz-2.6.17-2-686 root=/dev/sdb2 initrd /boot/initrd.img-2.6.17-2-686 savedefault boot # This entry automatically added by the Debian installer for an existing # linux installation on /dev/sdb2. title Debian GNU/Linux (3.1) (on /dev/sdb2) root (hd1,1) kernel /boot/vmlinuz-2.6.8-2-686 root=/dev/sdb2 initrd /boot/initrd.img-2.6.8-2-686 savedefault boot
