Package: linux-image-2.6.18-4-686 Version: 2.6.18.dfsg.1-11 Severity: normal
Hi, after resuming from suspend-to-ram (suspended with s2ram from uswsusp/unstable) mmc_core and sdhci spit out tons of errors and make the system very unresponsive. Eventually the system freezes (or unresponsiveness >>> my patience), a quick shutdown after resume usually helps. a few lines from syslog: Feb 27 04:15:18 lembas kernel: mmc0: Controller never released inhibit bit(s). Please report this to <[EMAIL PROTECTED]>. Feb 27 04:15:18 lembas kernel: mmc0: Reset 0x2 never completed. Please report this to <[EMAIL PROTECTED]>. Feb 27 04:15:18 lembas kernel: mmc0: Reset 0x4 never completed. Please report this to <[EMAIL PROTECTED]>. Feb 27 04:15:18 lembas kernel: mmc0: Controller never released inhibit bit(s). Please report this to <[EMAIL PROTECTED]>. Feb 27 04:15:18 lembas kernel: mmc0: Reset 0x2 never completed. Please report this to <[EMAIL PROTECTED]>. Feb 27 04:15:18 lembas kernel: mmc0: Reset 0x4 never completed. Please report this to <[EMAIL PROTECTED]>. Feb 27 04:15:18 lembas kernel: mmc0: Reset 0x1 never completed. Please report this to <[EMAIL PROTECTED]>. Feb 27 04:15:33 lembas kernel: mmc0: Got command interrupt even though no command operation was in progress. Feb 27 04:15:33 lembas kernel: mmc0: Please report this to <[EMAIL PROTECTED]>. Feb 27 04:15:33 lembas kernel: mmc0: Card is consuming too much power! Feb 27 04:15:33 lembas kernel: mmc0: Unexpected interrupt 0x00800000. Please report this to <[EMAIL PROTECTED]>. Feb 27 04:15:33 lembas kernel: mmc0: Got command interrupt even though no command operation was in progress. Feb 27 04:15:33 lembas kernel: mmc0: Please report this to <[EMAIL PROTECTED]>. Feb 27 04:15:33 lembas kernel: mmc0: Card is consuming too much power! Feb 27 04:15:33 lembas kernel: mmc0: Unexpected interrupt 0x00800000. Please report this to <[EMAIL PROTECTED]>. Feb 27 04:15:35 lembas kernel: mmc0: Controller never released inhibit bit(s). Please report this to <[EMAIL PROTECTED]>. Feb 27 04:15:35 lembas kernel: mmc0: Reset 0x2 never completed. Please report this to <[EMAIL PROTECTED]>. Feb 27 04:15:35 lembas kernel: mmc0: Reset 0x4 never completed. Please report this to <[EMAIL PROTECTED]>. The mmc messages are repeated in differing amounts of the single messages again and again, each message is followed (or preceded?) by the following sdhci messages: Feb 27 04:15:18 lembas kernel: sdhci: ============== REGISTER DUMP ============== Feb 27 04:15:18 lembas kernel: sdhci: Sys addr: 0xffffffff | Version: 0x0000ffff Feb 27 04:15:18 lembas kernel: sdhci: Blk size: 0x0000ffff | Blk cnt: 0x0000ffff Feb 27 04:15:18 lembas kernel: sdhci: Argument: 0xffffffff | Trn mode: 0x0000ffff Feb 27 04:15:18 lembas kernel: sdhci: Present: 0xffffffff | Host ctl: 0x000000ff Feb 27 04:15:18 lembas kernel: sdhci: Power: 0x000000ff | Blk gap: 0x000000ff Feb 27 04:15:18 lembas kernel: sdhci: Wake-up: 0x000000ff | Clock: 0x0000ffff Feb 27 04:15:18 lembas kernel: sdhci: Timeout: 0x000000ff | Int stat: 0xffffffff Feb 27 04:15:18 lembas kernel: sdhci: Int enab: 0xffffffff | Sig enab: 0xffffffff Feb 27 04:15:18 lembas kernel: sdhci: AC12 err: 0x0000ffff | Slot int: 0x0000ffff Feb 27 04:15:18 lembas kernel: sdhci: Caps: 0xffffffff | Max curr: 0xffffffff Feb 27 04:15:18 lembas kernel: sdhci: =========================================== Suspend-to-Ram (and resume) with the two modules mmc_core and sdhci unloaded just works fine. Since I don't need the card reader (not sure if it even works) I'll probably just blacklist these modules ... Andreas -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (900, 'testing'), (900, 'stable'), (600, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-4-k7 Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
