linux-2.6_2.6.18.dfsg.1-9.diff.gz
to pool/main/l/linux-2.6/linux-2.6_2.6.18.dfsg.1-9.diff.gz
linux-2.6_2.6.18.dfsg.1-9.dsc
to pool/main/l/linux-2.6/linux-2.6_2.6.18.dfsg.1-9.dsc
linux-2.6_2.6.18.dfsg.1.orig.tar.gz
to pool/main/l/linux-2.6/linux-2.6_2.6.18.dfsg.1.orig.tar.gz
linux-doc-2.6.18_2.6.18.dfsg.1-9_all.deb
to pool/main/l/linux-2.6/linux-doc-2.6.18_2.6.18.dfsg.1-9_all.deb
(new) linux-headers-2.6.18-4-all-powerpc_2.6.18.dfsg.1-9_powerpc.deb optional
devel
All header files for Linux 2.6.18
This package depends against all architecture-specific kernel header files
for Linux kernel version 2.6.18, generally used for building out-of-tree
kernel modules.
(new) linux-headers-2.6.18-4-all_2.6.18.dfsg.1-9_powerpc.deb optional devel
All header files for Linux 2.6.18
This package depends against all architecture-specific kernel header files
for Linux kernel version 2.6.18, generally used for building out-of-tree
kernel modules.
(new) linux-headers-2.6.18-4-powerpc-miboot_2.6.18.dfsg.1-9_powerpc.deb
optional devel
Header files for Linux 2.6.18 on 32-bit PowerPC for miboot floppy
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on 32-bit PowerPC for miboot floppy machines,
generally used for building out-of-tree kernel modules. These files are
going to be installed into /usr/src/linux-headers-2.6.18-4-powerpc-miboot,
and can be used for building modules that load into the kernel provided by
the linux-image-2.6.18-4-powerpc-miboot package.
(new) linux-headers-2.6.18-4-powerpc-smp_2.6.18.dfsg.1-9_powerpc.deb optional
devel
Header files for Linux 2.6.18 on multiprocessor 32-bit PowerPC
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on multiprocessor 32-bit PowerPC machines, generally
used for building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-4-powerpc-smp, and can be
used for building modules that load into the kernel provided by the
linux-image-2.6.18-4-powerpc-smp package.
(new) linux-headers-2.6.18-4-powerpc64_2.6.18.dfsg.1-9_powerpc.deb optional
devel
Header files for Linux 2.6.18 on 64-bit PowerPC
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on 64-bit PowerPC machines, generally used for
building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-4-powerpc64, and can be used
for building modules that load into the kernel provided by the
linux-image-2.6.18-4-powerpc64 package.
(new) linux-headers-2.6.18-4-powerpc_2.6.18.dfsg.1-9_powerpc.deb optional devel
Header files for Linux 2.6.18 on uniprocessor 32-bit PowerPC
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on uniprocessor 32-bit PowerPC machines, generally
used for building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-4-powerpc, and can be used
for building modules that load into the kernel provided by the
linux-image-2.6.18-4-powerpc package.
(new) linux-headers-2.6.18-4-prep_2.6.18.dfsg.1-9_powerpc.deb optional devel
Header files for Linux 2.6.18 on PReP PowerPC
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on PReP PowerPC machines, generally used for building
out-of-tree kernel modules. These files are going to be installed into
/usr/src/linux-headers-2.6.18-4-prep, and can be used for building modules
that load into the kernel provided by the linux-image-2.6.18-4-prep
package.
(new) linux-headers-2.6.18-4-vserver-powerpc64_2.6.18.dfsg.1-9_powerpc.deb
optional devel
Header files for Linux 2.6.18 on 64-bit PowerPC
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on 64-bit PowerPC machines, generally used for
building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-4-vserver-powerpc64, and can
be used for building modules that load into the kernel provided by the
linux-image-2.6.18-4-vserver-powerpc64 package.
(new) linux-headers-2.6.18-4-vserver-powerpc_2.6.18.dfsg.1-9_powerpc.deb
optional devel
Header files for Linux 2.6.18 on uniprocessor 32-bit PowerPC
This package provides the architecture-specific kernel header files for
Linux kernel 2.6.18 on uniprocessor 32-bit PowerPC machines, generally
used for building out-of-tree kernel modules. These files are going to be
installed into /usr/src/linux-headers-2.6.18-4-vserver-powerpc, and can be
used for building modules that load into the kernel provided by the
linux-image-2.6.18-4-vserver-powerpc package.
(new) linux-headers-2.6.18-4-vserver_2.6.18.dfsg.1-9_powerpc.deb optional devel
Common header files for Linux 2.6.18
This package provides the (sub)architecture-specific common kernel header
files for Linux kernel version 2.6.18, generally used for building
out-of-tree kernel modules. To obtain a complete set of headers you also
need to install the linux-headers-2.6.18-4-(flavour) package, matching the
flavour of the kernel you intend the build for. To obtain such a set for
the currently running kernel it is sufficient to run a command
.
apt-get install linux-headers-$(uname -r)
.
and it will be unpacked in /usr/src/linux-headers-2.6.18-4-(flavour).
(new) linux-headers-2.6.18-4_2.6.18.dfsg.1-9_powerpc.deb optional devel
Common header files for Linux 2.6.18
This package provides the (sub)architecture-specific common kernel header
files for Linux kernel version 2.6.18, generally used for building
out-of-tree kernel modules. To obtain a complete set of headers you also
need to install the linux-headers-2.6.18-4-(flavour) package, matching the
flavour of the kernel you intend the build for. To obtain such a set for
the currently running kernel it is sufficient to run a command
.
apt-get install linux-headers-$(uname -r)
.
and it will be unpacked in /usr/src/linux-headers-2.6.18-4-(flavour).
(new) linux-image-2.6.18-4-powerpc-miboot_2.6.18.dfsg.1-9_powerpc.deb optional
admin
Linux 2.6.18 image on 32-bit PowerPC for miboot floppy
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on 32-bit PowerPC for miboot floppy machines.
(new) linux-image-2.6.18-4-powerpc-smp_2.6.18.dfsg.1-9_powerpc.deb optional
admin
Linux 2.6.18 image on multiprocessor 32-bit PowerPC
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on multiprocessor 32-bit PowerPC machines.
(new) linux-image-2.6.18-4-powerpc64_2.6.18.dfsg.1-9_powerpc.deb optional admin
Linux 2.6.18 image on 64-bit PowerPC
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on 64-bit PowerPC machines.
(new) linux-image-2.6.18-4-powerpc_2.6.18.dfsg.1-9_powerpc.deb optional admin
Linux 2.6.18 image on uniprocessor 32-bit PowerPC
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on uniprocessor 32-bit PowerPC machines.
(new) linux-image-2.6.18-4-prep_2.6.18.dfsg.1-9_powerpc.deb optional admin
Linux 2.6.18 image on PReP PowerPC
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on PReP PowerPC machines.
(new) linux-image-2.6.18-4-vserver-powerpc64_2.6.18.dfsg.1-9_powerpc.deb
optional admin
Linux 2.6.18 image on 64-bit PowerPC
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on 64-bit PowerPC machines.
(new) linux-image-2.6.18-4-vserver-powerpc_2.6.18.dfsg.1-9_powerpc.deb optional
admin
Linux 2.6.18 image on uniprocessor 32-bit PowerPC
This package provides the binary image and pre-built loadable modules for
Linux kernel 2.6.18 on uniprocessor 32-bit PowerPC machines.
linux-manual-2.6.18_2.6.18.dfsg.1-9_all.deb
to pool/main/l/linux-2.6/linux-manual-2.6.18_2.6.18.dfsg.1-9_all.deb
linux-patch-debian-2.6.18_2.6.18.dfsg.1-9_all.deb
to pool/main/l/linux-2.6/linux-patch-debian-2.6.18_2.6.18.dfsg.1-9_all.deb
linux-source-2.6.18_2.6.18.dfsg.1-9_all.deb
to pool/main/l/linux-2.6/linux-source-2.6.18_2.6.18.dfsg.1-9_all.deb
(new) linux-support-2.6.18-4_2.6.18.dfsg.1-9_all.deb optional devel
Support files for Linux 2.6.18
This package provides support files for the Linux kernel build.
linux-tree-2.6.18_2.6.18.dfsg.1-9_all.deb
to pool/main/l/linux-2.6/linux-tree-2.6.18_2.6.18.dfsg.1-9_all.deb
Changes: linux-2.6 (2.6.18.dfsg.1-9) unstable; urgency=low
.
[ Martin Michlmayr ]
* arm/iop32x: Enable CONFIG_IP_NF_CONNTRACK_EVENTS and _NETLINK.
* arm/ixp4xx: Enable some more I2C sensor modules.
* arm/ixp4xx: Enable CONFIG_USB_NET_RNDIS_HOST.
* arm/footbridge: Enable CONFIG_NATSEMI.
* Revert mm/msync patches because they cause filesystem corruption
(closes: #401006, #401980, #402707) ...
* ... and add an alternative msync patch from Hugh Dickins that
doesn't depend on the mm changes (closes: #394392).
* mips: provide pci_get_legacy_ide_irq needed by some IDE drivers
(see #404950).
* arm: Implement flush_anon_page(), which is needed for FUSE
(closes: #402876) and possibly dm-crypt/LUKS (see #403426).
* arm: Turn off PCI burst on the Cyber2010, otherwise X11 on
Netwinder will crash.
* arm/iop32x: Enable CONFIG_IEEE80211_SOFTMAC and drivers based
on it.
* arm/ixp4xx: Upgrade to version 0.3.1 of the IXP4xx NPE Ethernet
driver. This version fixes stuck connections, e.g. with scp and
NFS (closes: #404447).
* arm/ixp4xx: Enable CONFIG_VIDEO_CPIA_USB.
* arm/ixp4xx: Enable CONFIG_ISCSI_TCP.
* arm/iop32x: Likewise.
.
[ Bastian Blank ]
* Bump ABI to 4.
* Update vserver patch to 2.0.2.2-rc9. (closes: #402743, #403790)
* Update xen patch to changeset 36186 from Fedora 2.6.18 branch.
* i386/xen: Build only the pae version. (closes: #390862)
* hppa: Override host type when necessary.
* Fix tg3 reset. (closes: #405085)
.
[ dann frazier ]
* Fix potential fragmentation attacks in ip6_tables (CVE-2006-4572)
* Backport a number of fixes for the cciss driver
- Fix a bug with 1TB disks caused by converting total_size to an int
- Claim devices that are of the HP RAID class and have a valid cciss sig
- Make NR_CMDS a per-controller define - most can do 1024 commands, but
the E200 family can only support 128
- Change the SSID on the E500 as a workaround for a firmware bug
- Disable prefetch on the P600 controller. An ASIC bug may result in
prefetching beyond the end of physical memory
- Increase blk_queue_max_sectors from 512 to 2048 to increase performance
- Map out more memor for the PCI config table, required to reach offset
0x214 to disable DMA on the P600
- Set a default raid level on a volume that either does not support
reading the geometry or reports an invalid geometry for whatever reason
to avoid problems with buggy firmware
- Revert change that replaed XFER_READ/XFER_WRITE macros with
h->cciss_read/h->cciss_write that caused command timeouts on older
controllers on ia32 (closes: #402787)
* Fix mincore hang (CVE-2006-4814)
* ia64: turn on IOC4 modules for SGI Altix systems. Thanks to Stephane Larose
for suggesting this.
* Add versioned build dep on findutils to make sure the system find command
supports the -execdir action (closes: #405150)
* Hardcode the output of the scripts under arch/ia64/scripts as executed
in an etch environment so that we can build out of tree modules correctly
(closes: #392592)
* Update unusual_devs entry for ipod to fix an eject issue (closes: #406124)
* Re-add verify_pmtmr_rate, resolving problems seen on older K6 ASUS
boards where the ACPI PM timer runs too fast (closes: #394753)
* Avoid condition where /proc/swaps header may not be printed
(closes: #292318)
* [hppa] disable XFS until it works (closes: #350482)
.
[ Norbert Tretkowski ]
* libata: handle 0xff status properly. (closes: #391867)
* alpha: enabled CONFIG_SCSI_ARCMSR. (closes: #401187)
* removed BROKEN_ON_SMP dependency from I2C_ELEKTOR. (closes: #402253)
.
[ Christian T. Steigies ]
* m68k/atari: enable keyboard, mouse and fb drivers
* m68k/atari: fixes for ethernec and video driver by Michael Schmitz
* m68k/atari: fixes for scsi driver by Michael Schmitz
* m68k/mac: fixes for mace and cuda driver by Finn Thain
* m68k/atari: fixes for ide driver by Michael Schmitz
* m68k/atari: fixes for ide driver by Michael Schmitz
* m68k/atari: fixes for ethernec and atakeyb driver by Michael Schmitz, build
ethernec as module
* m68k/mac: fixes for mace and adb driver by Finn Thain
.
[ maximilian attems ]
* Add stable release 2.6.18.6:
- EBTABLES: Fix wraparounds in ebt_entries verification.
- EBTABLES: Verify that ebt_entries have zero ->distinguisher.
- EBTABLES: Deal with the worst-case behaviour in loop checks.
- EBTABLES: Prevent wraparounds in checks for entry components' sizes.
- skip data conversion in compat_sys_mount when data_page is NULL
- bonding: incorrect bonding state reported via ioctl
- x86-64: Mark rdtsc as sync only for netburst, not for core2
(closes: #406767)
- dm crypt: Fix data corruption with dm-crypt over RAID5 (closes: #402812)
- forcedeth: Disable INTx when enabling MSI in forcedeth
- PKT_SCHED act_gact: division by zero
- XFRM: Use output device disable_xfrm for forwarded packets
- IPSEC: Fix inetpeer leak in ipv4 xfrm dst entries.
- V4L: Fix broken TUNER_LG_NTSC_TAPE radio support
- m32r: make userspace headers platform-independent
- IrDA: Incorrect TTP header reservation
- SUNHME: Fix for sunhme failures on x86
- Bluetooth: Add packet size checks for CAPI messages (CVE-2006-6106)
- softmac: remove netif_tx_disable when scanning
- DVB: lgdt330x: fix signal / lock status detection bug
- dm snapshot: fix freeing pending exception
- NET_SCHED: policer: restore compatibility with old iproute binaries
- NETFILTER: ip_tables: revision support for compat code
- ARM: Add sys_*at syscalls
- ieee1394: ohci1394: add PPC_PMAC platform code to driver probe
- softirq: remove BUG_ONs which can incorrectly trigger
* Hand-picked from stable release 2.6.16.30:
- [PPPOE]: Advertise PPPoE MTU
* Hand-picked from stable release 2.6.16.31:
- [NETFILTER]: Fix ip6_tables extension header bypass bug (CVE-2006-4572)
- fix RARP ic_servaddr breakage
* Hand-picked from stable release 2.6.16.32:
- drivers/telephony/ixj: fix an array overrun
- flush D-cache in failure path
* Hand-picked from stable release 2.6.16.33:
- Add new PHY to sis900 supported list
- ipmi_si_intf.c: fix "&& 0xff" typos
- drivers/scsi/psi240i.c: fix an array overrun
* Hand-picked from stable release 2.6.16.34:
- [IPX]: Annotate and fix IPX checksum
- [IGMP]: Fix IGMPV3_EXP() normalization bit shift value.
* Hand-picked from stable release 2.6.16.35:
- sgiioc4: Disable module unload
- Fix a masking bug in the 6pack driver.
- drivers/usb/input/ati_remote.c: fix cut'n'paste error
- proper flags type of spin_lock_irqsave()
* Hand-picked from stable release 2.6.16.37:
- [CRYPTO] sha512: Fix sha384 block size
- [SCSI] gdth: Fix && typos
- Fix SUNRPC wakeup/execute race condition
* Enable DEBUG_FS for usbmon in generic config. Don't disable it on alpha,
amd64, hppa and ia64. (closes: 378542)
* Backport a number of upstream fixes for the r8169 driver, needed for
network performance (closes: 388870, 400524)
- r8169: more alignment for the 0x8168
- r8169: phy program update
- r8169: more magic during initialization of the hardware
- r8169: perform a PHY reset before any other operation at boot time
- r8169: Fix iteration variable sign
- r8169: remove extraneous Cmd{Tx/Rx}Enb write
* sound: hda: detect ALC883 on MSI K9A Platinum motherboards (MS-7280)
patch from Leonard Norrgard <[EMAIL PROTECTED]>
* tulip: Add i386 specific patch to remove duplicate pci ids.
Thanks Jurij Smakov <[EMAIL PROTECTED]> (closes: #334104, #405203)
* amd64, i386: Disable SK98LIN as SKGE is the modern capable driver.
(closes: 405196)
* Backout net-bcm43xx_netdev_watchdog.patch and push 2.6.18.2 fix.
(closes: 402475)
.
[ Jurij Smakov ]
* Add bugfix/sparc/isa-dev-no-reg.patch to make sure that
isa_dev_get_resource() can deal with devices which do not have a 'reg'
PROM property. Failure to handle such devices properly resulted in an
oops during boot on Netra X1. Thanks to Richard Mortimer for debugging
and patch. (closes: #404216)
* Add bugfix/sparc/ehci-hub-contol-alignment.patch to prevent unaligned
memory accesses in ehci-hub-control() by adding an alignment attribute
to the tbuf array declaration. Thanks to David Miller for the patch.
.
[ Sven Luther ]
* [powerpc] Enable CONFIG_PMAC_BACKLIGHT_LEGACY (Closes: #407671).
Override entries for your package:
linux-2.6_2.6.18.dfsg.1-9.dsc - source devel
linux-doc-2.6.18_2.6.18.dfsg.1-9_all.deb - optional doc
linux-manual-2.6.18_2.6.18.dfsg.1-9_all.deb - optional doc
linux-patch-debian-2.6.18_2.6.18.dfsg.1-9_all.deb - optional devel
linux-source-2.6.18_2.6.18.dfsg.1-9_all.deb - optional devel
linux-tree-2.6.18_2.6.18.dfsg.1-9_all.deb - optional devel
Announcing to debian-devel-changes@lists.debian.org
Closing bugs: 292318 334104 350482 378542 388870 390862 391867 392592 394392
394753 400524 401006 401187 401980 402253 402475 402707 402743 402787 402812
402876 403790 404216 404447 405085 405150 405196 405203 406124 406767 407671
Your package contains new components which requires manual editing of
the override file. It is ok otherwise, so please be patient. New
packages are usually added to the override file about once a week.
You may have gotten the distribution wrong. You'll get warnings above
if files already exist in other distributions.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
