On Tue, Jan 16, 2007 at 10:19:53PM -0500, Jean Privat wrote: > Package: linux-image-2.6.18-3-powerpc > Version: 2.6.18-8
> Hi, on my powerbook the broadcom driver does not work. bcm43xx is still a young driver and not fully functional in 2.6.18 can you test linux image 2.6.19 or 2.6.20-rcX from buildserver trunk apt lines -> http://wiki.debian.org/DebianKernel > Scanning works: > # iwlist eth1 scan > eth1 Scan completed : > Cell 01 - Address: 00:11:50:9D:XX:XX > ESSID:"XX" > Protocol:IEEE 802.11bg > Mode:Master > Channel:6 > Encryption key:on > Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s > 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s > 48 Mb/s; 54 Mb/s > Quality=100/100 Signal level=-155 dBm > Extra: Last beacon: 156ms ago > Cell 02 - Address: 00:14:BF:DB:XX:XX > ESSID:"XXX" > Protocol:IEEE 802.11bg > Mode:Master > Channel:6 > Encryption key:on > Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s > 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s > 48 Mb/s; 54 Mb/s > Quality=100/100 Signal level=-196 dBm > Extra: Last beacon: 224ms ago > > But the connexion doesn't: > # iwconfig eth1 > eth1 IEEE 802.11b/g ESSID:"XX" Nickname:"Broadcom 4306" > Mode:Managed Frequency=2.484 GHz Access Point: Invalid > Bit Rate:1 Mb/s Tx-Power=15 dBm > RTS thr:off Fragment thr:off > Encryption key:off > Link Quality:0 Signal level:0 Noise level:0 > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > > Whatever I do, the "Acces Point" is always invalid. I tryed to follow each > HOWTO that I found on Google but nothing worked. > > Remark. Before I used Ubuntu on this computer and notice the same bug. > The Ubuntu bug repport is > https://launchpad.net/ubuntu/+source/linux-source-2.6.17/+bug/76685 > thanks -- maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
