Package: linux-image-2.6.18-3-amd64
Version: 2.6.18-7
Severity: important
The arcmsr driver (ARC-1230 SATA-RAID controller) throws some error
messages since adding 2 76GB Western Digital Raptor disks (WDC
WD740ADFD-00NLR1) to the controller. The 2 disks are configured as RAID1
(Channel: 00 Id: 00 Lun: 04, Raid Set # 01).
Raid Set # 00 is a RAID5 containing 7 Segate 750GB disks in 4 1.1 TB Volumes.
I have never seen any error messages for this device (Channel: 00 Id: 00 Lun:
00-03). Even with a full drbd sync there has never been an error message.
With the Raid1 I can reproduce the error. It's triggerd every time I start a
disk benchmark, for example tiobench.
tiobench --numruns 3 --threads 1 --threads 2 --block 4096 --size 8000
Jan 12 14:55:14 VU0EM005 kernel: arcmsr4: abort device command of scsi id=0
lun=4
Jan 12 14:55:15 VU0EM005 kernel: arcmsr4: ccb='0xffff8100dfe9fc80' isr got
aborted command
Jan 12 15:00:18 VU0EM005 kernel: arcmsr4: abort device command of scsi id=0
lun=4
Jan 12 15:01:03 VU0EM005 kernel: arcmsr4: abort device command of scsi id=0
lun=4
Jan 12 15:01:13 VU0EM005 kernel: arcmsr4: ccb='0xffff8100dfe9b480' isr got
aborted command
Jan 12 15:02:10 VU0EM005 kernel: arcmsr4: abort device command of scsi id=0
lun=4
Jan 12 15:02:19 VU0EM005 kernel: arcmsr4: ccb='0xffff8100dfe89d80' isr got
aborted command
Jan 12 15:12:23 VU0EM005 kernel: arcmsr4: abort device command of scsi id=0
lun=4
Jan 12 15:12:26 VU0EM005 kernel: arcmsr4: ccb='0xffff8100dfe9b480' isr got
aborted command
I already tried to boot with noapi and acpi=off, this didn't help. I also
removed all Raid Sets an created them from scratch.
Some more system info:
Raid Set Hierarchy (Areca Admin Tool):
Raid Set # 00 Ch04 ARC-1230 R5-V1 (0/0/0) Normal 1125.0GB
Ch03 ARC-1230 R5-V2 (0/0/1) Normal 1125.0GB
Ch06 ARC-1230 R5-V3 (0/0/2) Normal 1125.0GB
Ch05 ARC-1230 R5-V4 (0/0/3) Normal 1125.0GB
Ch08
Ch07
Ch09
Raid Set # 01 Ch02 ARC-1230 R1-V1 (0/0/4) Normal 68.0GB
Ch01 ARC-1230 R1-V2 (0/0/5) Normal 2.0GB
modinfo arcmsr:
filename: /lib/modules/2.6.18-3-amd64/kernel/drivers/scsi/arcmsr/arcmsr.ko
author: Erich Chen <[EMAIL PROTECTED]>
description: ARECA (ARC11xx/12xx) SATA RAID HOST Adapter
license: Dual BSD/GPL
version: Driver Version 1.20.00.13
vermagic: 2.6.18-3-amd64 SMP mod_unload gcc-4.1
depends: scsi_mod
Areca ARC-1230 Firmware: Firmware Version V1.42 2006-10-13
Core 2 Duo Conroe 6600 CPU
4GB RAM
Supermicro MB
4x Intel e1000 NIC
2 80GB SATA Disks connected to onboard controller
2 250GB SATA Disks connected to onboard controller
Adaptec AIC-7901 U320 SCSI HBA
NEC-T40A changer with LTO3 Ultruim drive
/proc/interrupts
CPU0 CPU1
0: 1538887 0 IO-APIC-edge timer
6: 3 0 IO-APIC-edge floppy
8: 0 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
14: 64 0 IO-APIC-edge ide0
50: 14345 0 PCI-MSI libata
58: 6274099 0 IO-APIC-level arcmsr, uhci_hcd:usb3
66: 226 0 IO-APIC-level aic79xx
74: 23 0 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb5
82: 10733179 0 IO-APIC-level eth2
90: 10922405 0 IO-APIC-level eth3
98: 13281 0 PCI-MSI eth0
106: 3194 0 PCI-MSI eth1
169: 48 0 IO-APIC-level uhci_hcd:usb4
233: 0 0 IO-APIC-level uhci_hcd:usb2
NMI: 55 31
LOC: 1516969 1516986
ERR: 0
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
