Hello.
This is udevinfo from a fresh etch install with adaptec 2120s card.
looking at device '/block/sda':
KERNEL=="sda"
SUBSYSTEM=="block"
DRIVER==""
ATTR{stat}==" 1150 687 35710 6936 211 397
4858 1108 0 5816 8044"
ATTR{size}=="71685120"
ATTR{removable}=="1"
ATTR{range}=="16"
ATTR{dev}=="8:0"
looking at parent
device '/devices/pci0000:01/0000:01:0b.0/host2/target2:0:0/2:0:0:0':
KERNELS=="2:0:0:0"
SUBSYSTEMS=="scsi"
DRIVERS=="sd"
ATTRS{ioerr_cnt}=="0x0"
ATTRS{iodone_cnt}=="0x57b"
ATTRS{iorequest_cnt}=="0x57b"
ATTRS{iocounterbits}=="32"
ATTRS{timeout}=="30"
ATTRS{state}=="running"
ATTRS{rev}=="V1.0"
ATTRS{model}=="System "
ATTRS{vendor}=="Adaptec "
ATTRS{scsi_level}=="3"
ATTRS{type}=="0"
ATTRS{queue_type}=="ordered"
ATTRS{queue_depth}=="256"
ATTRS{device_blocked}=="0"
looking at parent
device '/devices/pci0000:01/0000:01:0b.0/host2/target2:0:0':
KERNELS=="target2:0:0"
SUBSYSTEMS==""
DRIVERS==""
looking at parent device '/devices/pci0000:01/0000:01:0b.0/host2':
KERNELS=="host2"
SUBSYSTEMS==""
DRIVERS==""
looking at parent device '/devices/pci0000:01/0000:01:0b.0':
KERNELS=="0000:01:0b.0"
SUBSYSTEMS=="pci"
DRIVERS=="aacraid"
ATTRS{broken_parity_status}=="0"
ATTRS{enable}=="1"
ATTRS{modalias}=="pci:v00009005d00000285sv00009005sd00000286bc01sc04i00"
ATTRS{local_cpus}=="ff"
ATTRS{irq}=="217"
ATTRS{class}=="0x010400"
ATTRS{subsystem_device}=="0x0286"
ATTRS{subsystem_vendor}=="0x9005"
ATTRS{device}=="0x0285"
ATTRS{vendor}=="0x9005"
looking at parent device '/devices/pci0000:01':
KERNELS=="pci0000:01"
SUBSYSTEMS==""
DRIVERS==""
Best regards,
---
Mateusz Skowroński
