Package: linux-image-2.6.18-3-686 Version: 2.6.18-8 Severity: important
Hi,
on a Fujitsu Siemens LifeBook E8110 the sky2 ethernet driver crashes on
bootup about every second try. This also happens on resume or
rmmod/modprobe. Here is the output captured via a serial console on a
bootup:
sky2 eth1: enabling interface
sky2 eth1: phy write timeout
sky2 eth1: phy write timeout
sky2 0000:02:00.0: pci hw error (0xffff)
sky2 0000:02:00.0: pci express error (0xffffffff)
sky2 eth1: hw error interrupt status 0xffffffff
sky2 eth1: ram data read parity error
sky2 eth1: ram data write parity error
sky2 eth1: MAC parity error
sky2 eth1: RX parity error
sky2 eth1: TCP segmentation error
sky2 <NULL>: hw error interrupt status 0xffffff
sky2 <NULL>: ram data read parity error
sky2 eth1: phy write timeout
sky2 eth1: phy write timeout
sky2 eth1: phy write timeout
sky2 eth1: phy write timeout
sky2 eth1: phy write timeout
sky2 eth1: phy write timeout
sky2 eth1: phy write timeout
sky2 eth1: phy write timeout
sky2 eth1: phy write timeout
sky2 eth1: remote fault<1>BUG: unable to handle kernel NULL pointer dereference
at virtual address 0000002c
printing eip:
e024f152
*pde = 00000000
Oops: 0000 [#1]
SMP
Modules linked in: button ac battery dm_snapshot dm_mirror dm_mod i915 drm sbp2
loop snd_hda_intel snd_hda_codec snd_pcm_oss snd_pcm snd_mixer_oss
snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event pcmcia
snd_seq ipw3945 joydev snd_timer snd_seq_device hci_usb sdhci tsdev ieee80211
snd ieee80211_crypt i2c_i801 sky2 intel_agp agpgart bluetooth rtc yenta_socket
rsrc_nonstatic pcmcia_core serio_raw mmc_core i2c_core parport_pc parport
firmware_class soundcore pcspkr eth1394 snd_page_alloc evdev psmouse irda
crc_ccitt ext3 jbd mbcache ide_cd cdrom sd_mod generic ata_piix ehci_hcd libata
ohci1394 ieee1394 uhci_hcd scsi_mod piix ide_core usbcore thermal processor fan
CPU: 0
EIP: 0060:[<e024f152>] Not tainted VLI
EFLAGS: 00010296 (2.6.18-3-686 #1)
EIP is at sky2_phy_intr+0x10/0x19e [sky2]
eax: de15adc0 ebx: 00000001 ecx: 00000046 edx: 00000001
esi: ffffffff edi: c13f5b80 ebp: 00000000 esp: c0313ee8
ds: 007b es: 007b ss: 0068
Process swapper (pid: 0, ti=c0312000 task=c02c76a0 task.ti=c0312000)
Stack: de15adc0 e024eefd 00042010 ffffffff c13f5b80 fffef9d2 e024fe35 c0313f50
de977400 de15adc0 00000040 c0215ff3 ffffffff c0215e47 00000000 00000000
c0361b14 00000286 c01254c5 00000000 00000286 00000000 de977400 c13f5b80
Call Trace:
[<e024eefd>] sky2_hw_error+0xe5/0x110 [sky2]
[<e024fe35>] sky2_poll+0x181/0x8e8 [sky2]
[<c0215ff3>] i8042_timer_func+0x0/0xb
[<c0215e47>] i8042_interrupt+0x4c/0x1f8
[<c01254c5>] __mod_timer+0x99/0xa3
[<c022a4c3>] net_rx_action+0x92/0x17f
[<c012186c>] __do_softirq+0x5a/0xbb
[<c0121903>] do_softirq+0x36/0x3a
[<c0103747>] apic_timer_interrupt+0x1f/0x24
[<e003f5ac>] acpi_processor_idle+0x1ec/0x380 [processor]
[<c0101b52>] cpu_idle+0x9f/0xb9
[<c03186fd>] start_kernel+0x379/0x380
Code: 68 51 50 52 ff 73 04 68 81 22 25 e0 e8 32 e8 ec df 83 c4 14 59 5b 5b 5e
5f 5d c3 55 57 56 53 89 d3 83 ec 08 89 04 24 8b 6c 90 08 <8b> 45 2c a8 02 0f 84
7c 01 00 00 8d 85 d0 02 00 00 e8 11 1e 03
EIP: [<e024f152>] sky2_phy_intr+0x10/0x19e [sky2] SS:ESP 0068:c0313ee8
<0>Kernel panic - not syncing: Fatal exception in interrupt
Here is an lspci -vvv output of the chip:
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E
Gigabit Ethernet Controller (rev 12)
Subsystem: Fujitsu Limited. Unknown device 139a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 66
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 2000 [size=256]
[virtual] Expansion ROM at 34000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable+
Address: 00000000fee00000 Data: 4042
Capabilities: [e0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
Link: Latency L0s <256ns, L1 unlimited
Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [100] Advanced Error Reporting
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-3-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6.18-3-686 depends on:
ii coreutils 5.97-5 The GNU core utilities
ii debconf [debconf-2.0] 1.5.8 Debian configuration management sy
ii initramfs-tools [linux-initra 0.85c tools for generating an initramfs
ii module-init-tools 3.3-pre3-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.18-3-686 recommends:
ii libc6-i686 2.3.6.ds1-8 GNU C Library: Shared libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.18-3-686/postinst/bootloader-error-2.6.18-3-686:
linux-image-2.6.18-3-686/postinst/old-dir-initrd-link-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/kimage-is-a-directory:
linux-image-2.6.18-3-686/preinst/elilo-initrd-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/old-system-map-link-2.6.18-3-686: true
linux-image-2.6.18-3-686/preinst/lilo-initrd-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/depmod-error-initrd-2.6.18-3-686: false
linux-image-2.6.18-3-686/preinst/bootloader-initrd-2.6.18-3-686: true
linux-image-2.6.18-3-686/prerm/removing-running-kernel-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/create-kimage-link-2.6.18-3-686: true
linux-image-2.6.18-3-686/prerm/would-invalidate-boot-loader-2.6.18-3-686: true
linux-image-2.6.18-3-686/preinst/abort-install-2.6.18-3-686:
linux-image-2.6.18-3-686/preinst/overwriting-modules-2.6.18-3-686: true
linux-image-2.6.18-3-686/preinst/initrd-2.6.18-3-686:
linux-image-2.6.18-3-686/preinst/lilo-has-ramdisk:
* linux-image-2.6.18-3-686/preinst/already-running-this-2.6.18-3-686:
linux-image-2.6.18-3-686/postinst/bootloader-test-error-2.6.18-3-686:
linux-image-2.6.18-3-686/preinst/abort-overwrite-2.6.18-3-686:
linux-image-2.6.18-3-686/postinst/old-initrd-link-2.6.18-3-686: true
linux-image-2.6.18-3-686/postinst/depmod-error-2.6.18-3-686: false
linux-image-2.6.18-3-686/preinst/failed-to-move-modules-2.6.18-3-686:
--
Florian Lohoff [EMAIL PROTECTED] +49-171-2280134
Heisenberg may have been here.
signature.asc
Description: Digital signature
