Package: linux-image-2.6.18-1-686
Version: 2.6.18-3
Severity: normal
On my HP nc4010, the activation of the bluetooth device (thanks to
a special button that also activate the wireless device) generate an
(infinite?)
loop the ohci_hcd module reported in syslog as follows:
Aug 25 09:19:57 localhost kernel: usb 1-3: new full speed USB device
using ohci_hcd and
address 2
Aug 25 09:19:57 localhost kernel: usb 1-3: device descriptor read/64,
error -110
Aug 25 09:19:57 localhost kernel: usb 1-3: device descriptor read/64,
error -110
Aug 25 09:19:57 localhost kernel: usb 1-3: new full speed USB device
using ohci_hcd and
address 3
Aug 25 09:19:57 localhost kernel: usb 1-3: device descriptor read/64,
error -110
Aug 25 09:19:58 localhost kernel: usb 1-3: device descriptor read/64,
error -110
Aug 25 09:19:58 localhost kernel: usb 1-3: new full speed USB device
using ohci_hcd and
address 4
.... and so on...
It was working with older releases (up to 2.6.15 if I remember well)
This is boring because as a side effect, wireless is not working
anymore...
Here is the (snip) output of lspci -vv
00:12.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation Unknown device 005a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR-
FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort-
>SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 98300000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: <access denied>
00:12.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation Unknown device 005a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR-
FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort-
>SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at 98380000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: <access denied>
00:12.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20
[EHCI])
Subsystem: Compaq Computer Corporation Unknown device 005a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR-
FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort-
>SERR- <PERR-
Latency: 64 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 10
Region 0: Memory at 98400000 (32-bit, non-prefetchable)
[size=256]
Capabilities: <access denied>
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-1-686
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Versions of packages linux-image-2.6.18-1-686 depends on:
ii initramfs-tools [linux-initra 0.84 tools for generating an initramfs
ii module-init-tools 3.2.2-3 tools for managing Linux kernel mo
ii yaird [linux-initramfs-tool] 0.0.12-18 Yet Another mkInitRD
Versions of packages linux-image-2.6.18-1-686 recommends:
ii libc6-i686 2.3.6.ds1-7 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.18-1-686/postinst/bootloader-error-2.6.18-1-686:
linux-image-2.6.18-1-686/postinst/depmod-error-initrd-2.6.18-1-686: false
linux-image-2.6.18-1-686/preinst/initrd-2.6.18-1-686:
linux-image-2.6.18-1-686/preinst/elilo-initrd-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/abort-overwrite-2.6.18-1-686:
* linux-image-2.6.18-1-686/preinst/already-running-this-2.6.18-1-686:
linux-image-2.6.18-1-686/postinst/bootloader-test-error-2.6.18-1-686:
linux-image-2.6.18-1-686/postinst/depmod-error-2.6.18-1-686: false
linux-image-2.6.18-1-686/preinst/lilo-initrd-2.6.18-1-686: true
linux-image-2.6.18-1-686/prerm/removing-running-kernel-2.6.18-1-686: true
linux-image-2.6.18-1-686/postinst/old-system-map-link-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/bootloader-initrd-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/abort-install-2.6.18-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.18-1-686/postinst/create-kimage-link-2.6.18-1-686: true
linux-image-2.6.18-1-686/postinst/old-initrd-link-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.18-1-686/postinst/old-dir-initrd-link-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/overwriting-modules-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/failed-to-move-modules-2.6.18-1-686:
linux-image-2.6.18-1-686/prerm/would-invalidate-boot-loader-2.6.18-1-686: true
linux-image-2.6.18-1-686/postinst/kimage-is-a-directory:
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
