Package: linux-image-2.6.18-1-686
Version: 2.6.18-3
Severity: normal
hostap_cs driver seems to load correctly for this card (see syslog
below) however network interface is called wlan0_ren instead of wlan0,
there is no wifi0, and ifup fails with error:
dhclient: Bind socket to interface: No such device
# lspcmcia -v
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:00:08.0)
Configuration: state: on ready: yes
Voltage: 3.3V Vcc: 3.3V Vpp: 0.0V
Socket 0 Device 0: [hostap_cs] (bus ID: 0.0)
Configuration: state: on
Product Name: INTERSIL HFA384x/IEEE Version 01.02
Identification: manf_id: 0x0156 card_id: 0x0002
function: 6 (network)
prod_id(1): "INTERSIL" (0x74c5e40d)
prod_id(2): "HFA384x/IEEE" (0xdb472a18)
prod_id(3): "Version 01.02" (0x4b74baa0)
prod_id(4): --- (---)
Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:00:08.1)
Configuration: state: on ready: yes
kernel: pccard: PCMCIA card inserted into slot 0
kernel: pcmcia: registering new device pcmcia0.0
kernel: ieee80211_crypt: registered algorithm 'NULL'
kernel: hostap_cs: 0.4.4-kernel (Jouni Malinen <[EMAIL PROTECTED]>)
kernel: hostap_cs: setting Vcc=33 (constant)
kernel: Checking CFTABLE_ENTRY 0x01 (default 0x01)
kernel: IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
kernel: io->flags = 0x0046, io.base=0x0000, len=64
kernel: hostap_cs: Registered netdevice wifi0
kernel: hostap_cs: index 0x01: , irq 3, io 0x0100-0x013f
kernel: prism2_hw_init: initialized in 200 ms
kernel: wifi0: NIC: id=0x800c v1.0.0
kernel: wifi0: PRI: id=0x15 v1.1.0
kernel: wifi0: STA: id=0x1f v1.4.9
kernel: wifi0: defaulting to bogus WDS frame as a workaround for
firmware bug in Host AP mode WDS
kernel: wifi0: registered netdevice wlan0
dhclient: Internet Software Consortium DHCP Client 2.0pl5
<snip>
dhclient: eth1: unknown hardware address type 801
dhclient: sit0: unknown hardware address type 776
dhclient: eth1: unknown hardware address type 801
dhclient: sit0: unknown hardware address type 776
dhclient: Bind socket to interface: No such device
dhclient: exiting.
# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:00:86:46:0F:56
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:11 Base address:0x6400
eth1 Link encap:UNSPEC HWaddr
00-02-6F-34-96-3C-00-64-00-00-00-00-00-00-00-00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:3 Base address:0x100
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wlan0_ren Link encap:Ethernet HWaddr 00:02:6F:34:96:3C
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:3 Base address:0x100
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-1-686
Locale: LANG=en_HK, LC_CTYPE=en_HK (charmap=locale: Cannot set LC_CTYPE to
default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
ANSI_X3.4-1968)
Versions of packages linux-image-2.6.18-1-686 depends on:
ii initramfs-tools [linux-initra 0.83 tools for generating an initramfs
ii module-init-tools 3.2.2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.18-1-686 recommends:
pn libc6-i686 <none> (no description available)
-- debconf information:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_HK:en_US:en_GB:en",
LC_ALL = (unset),
LANG = "en_HK"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
linux-image-2.6.18-1-686/postinst/bootloader-error-2.6.18-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.18-1-686/postinst/depmod-error-initrd-2.6.18-1-686: false
linux-image-2.6.18-1-686/postinst/create-kimage-link-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/initrd-2.6.18-1-686:
linux-image-2.6.18-1-686/preinst/abort-overwrite-2.6.18-1-686:
linux-image-2.6.18-1-686/preinst/elilo-initrd-2.6.18-1-686: true
linux-image-2.6.18-1-686/postinst/old-initrd-link-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/already-running-this-2.6.18-1-686:
linux-image-2.6.18-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.18-1-686/postinst/bootloader-test-error-2.6.18-1-686:
linux-image-2.6.18-1-686/postinst/depmod-error-2.6.18-1-686: false
linux-image-2.6.18-1-686/postinst/old-dir-initrd-link-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/overwriting-modules-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/failed-to-move-modules-2.6.18-1-686:
linux-image-2.6.18-1-686/preinst/lilo-initrd-2.6.18-1-686: true
linux-image-2.6.18-1-686/prerm/removing-running-kernel-2.6.18-1-686: true
linux-image-2.6.18-1-686/postinst/old-system-map-link-2.6.18-1-686: true
linux-image-2.6.18-1-686/prerm/would-invalidate-boot-loader-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/bootloader-initrd-2.6.18-1-686: true
linux-image-2.6.18-1-686/preinst/abort-install-2.6.18-1-686:
linux-image-2.6.18-1-686/postinst/kimage-is-a-directory:
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
