On Tue, Oct 03 2006, Oleg Verych wrote: > > > Hallo. > > [Jens, let me cc you.]
It's an ide core thing, not an ide-cd problem. Perhaps Alan or Bart has a good idea. > > On 2006-10-02, Hilmar Preusse wrote: > > Package: linux-image-2.6.18-1-686 > > Version: 2.6.18-2 > > Severity: minor > > > > Upon loading the driver for the CD-Rom on my Notebook the driver spits out > > weird messages. I'm attaching the relevant part of dmesg. The part of the > > lilo.conf reads: > > > > image=/boot/vmlinuz-2.6.18-1-686 > > label="Lin_2.6.18-1" > > initrd=/boot/initrd.img-2.6.18-1-686 > > append="irqpoll" > > read-only > > It's better to show cmdline instead: dd </proc/cmdline > Could you test lates upsteam kernel or mm tree, please ? > > > [EMAIL PROTECTED]:~ # lspci -v -s 00:10.0 > > 00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c3) (prog-if fa) > > Subsystem: Acer Incorporated [ALI] Unknown device 1010 > > Flags: bus master, medium devsel, latency 32, IRQ 15 > > I/O ports at 6050 [size=16] > > Capabilities: [60] Power Management version 2 > > > > The bug occured for the first time around Linux 2.6.16 and occurs since > > then. The notebook is an Acer Travelmate 524TEV. > > > > Thanks for listening, > > Hilmar > > -- System Information: > > Debian Release: testing/unstable > > APT prefers unstable > > APT policy: (500, 'unstable'), (1, 'experimental') > > Architecture: i386 (i686) > > Shell: /bin/sh linked to /bin/bash > > Kernel: Linux 2.6.18-1-686 > > Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ANSI_X3.4-1968) (ignored: > > LC_ALL set to POSIX) > > > > Versions of packages linux-image-2.6.18-1-686 depends on: > > ii module-init-tools 3.2.2-3 tools for managing Linux > > kernel mo > > ii yaird [linux-initramfs-tool] 0.0.12-18 Yet Another mkInitRD > > > > Versions of packages linux-image-2.6.18-1-686 recommends: > > pn libc6-i686 <none> (no description available) > > > > -- debconf information excluded > > > > --===============0932014171== > > Content-Type: text/plain; charset="us-ascii" > > MIME-Version: 1.0 > > Content-Transfer-Encoding: 7bit > > Content-Disposition: attachment; filename="dmesg" > > > > Probing IDE interface ide0... > > hda: IBM-DJSA-210, ATA DISK drive > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > Probing IDE interface ide1... > > hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive > > irq 15: nobody cared (try booting with the "irqpoll" option) > > <b0139fdb> __report_bad_irq+0x2b/0x69 <b013a1a7> note_interrupt+0x18e/0x1bb > > <b0139b87> __do_IRQ+0xa0/0xd1 <b0104fe1> do_IRQ+0x19/0x24 > > <b0103592> common_interrupt+0x1a/0x20 <b0120a49> __do_softirq+0x4f/0xc2 > > <b0120aea> do_softirq+0x2e/0x32 <b0104fe6> do_IRQ+0x1e/0x24 > > <b0103592> common_interrupt+0x1a/0x20 <b0271cf3> > > _spin_unlock_irqrestore+0x6/0x7 > > <b0139e16> setup_irq+0xab/0x108 <c8842a39> ide_intr+0x0/0x18b [ide_core] > > <b0139ee2> request_irq+0x6f/0x8b <c8845ca1> init_irq+0x1eb/0x423 [ide_core] > > <b01a93ea> register_blkdev+0xc8/0xd2 <b0205dd8> __driver_attach+0x0/0x5d > > <c8846048> hwif_init+0x121/0x310 [ide_core] <b0205dd8> > > __driver_attach+0x0/0x5d > > <c8846347> probe_hwif_init_with_fixup+0x1a/0x66 [ide_core] <c884813b> > > ide_setup_pci_device+0x62/0x6d [ide_core] > > <b01b98ac> pci_device_probe+0x36/0x57 <b0205d39> > > driver_probe_device+0x42/0x8b > > <b0205e10> __driver_attach+0x38/0x5d <b020585a> bus_for_each_dev+0x33/0x55 > > <b0205ca3> driver_attach+0x11/0x13 <b0205dd8> __driver_attach+0x0/0x5d > > <b0205581> bus_add_driver+0x64/0xfd <b01b99e8> > > __pci_register_driver+0x47/0x63 > > <b0132857> sys_init_module+0x151e/0x16c9 <b013ce06> > > generic_file_read+0x98/0xac > > <b01b667a> pci_bus_read_config_byte+0x0/0x58 <b0166786> dput+0x1a/0x118 > > <b0153c68> __fput+0x119/0x13c <b0102b4f> syscall_call+0x7/0xb > > handlers: > > [<c8842a39>] (ide_intr+0x0/0x18b [ide_core]) > > Disabling IRQ #15 > > ide1 at 0x170-0x177,0x376 on irq 15 > > hda: max request size: 128KiB > > hda: 19640880 sectors (10056 MB) w/384KiB Cache, CHS=19485/16/63, UDMA(33) > > hda: cache flushes not supported > > hda: hda1 > > > > --===============0932014171==-- > > > > -- Jens Axboe -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
