Package: linux-source-2.6.17 Version: 2.6.17-6 Severity: normal
I have a wireless PCMCIA card that works fine on another machine using kernel 2. 6.16/hotplug, but locks this machine up hard every time using 2.6.16 and 2.6.17 and udev (requires power down and reboot). Crash occurs both on card insertion a nd on boot with card already inserted. On the machine where the card works: cardctl ident: Socket 0: product info: "INTERSIL", "HFA384x/IEEE", "Version 01.02", "" manfid: 0x0156, 0x0002 function: 6 (network) syslog on working machine: kernel: pccard: PCMCIA card inserted into slot 0 kernel: pcmcia: registering new device pcmcia0.0 cardmgr[2864]: socket 0: Senao SL-2011CD/SL-2011CDPLUS cardmgr[2864]: executing: 'modprobe hostap 2>&1' cardmgr[2864]: + WARNING: Failed to open config file /etc/modprobe.d/alsa: No such file or directory kernel: ieee80211_crypt: registered algorithm 'NULL' cardmgr[2864]: executing: 'modprobe hostap_cs 2>&1' cardmgr[2864]: + WARNING: Failed to open config file /etc/modprobe.d/alsa: No such file or directory kernel: hostap_cs: 0.4.4-kernel (Jouni Malinen <[EMAIL PROTECTED]>) kernel: hostap_cs: setting Vcc=33 (constant) kernel: hostap_cs: setting Vcc=33 (from config) kernel: Checking CFTABLE_ENTRY 0x01 (default 0x01) kernel: IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 kernel: io->flags = 0x0046, io.base=0x0000, len=64 kernel: hostap_cs: Registered netdevice wifi0 kernel: hostap_cs: index 0x01: Vcc 3.3, irq 11, io 0x0100-0x013f kernel: prism2_hw_init: initialized in 200 ms kernel: wifi0: NIC: id=0x800c v1.0.0 kernel: wifi0: PRI: id=0x15 v1.1.0 kernel: wifi0: STA: id=0x1f v1.4.9 kernel: wifi0: defaulting to bogus WDS frame as a workaround for firmware bug in Host AP mode WDS kernel: wifi0: registered netdevice wlan0 On the machine that crashes, normally there is nothing interesting written to th e logs after I reboot. However, syslog tails sometimes show a few lines at crash time: syslog tail showed this one time on crash (2.6.16 or 2.6.17, not sure): kernel: pccard: PCMCIA card inserted into slot 0 kernel: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0fffff kernel: cs: memory probe 0x60000000-0x60fffff: clean kernel: pcmcia: register new device pcmcia0.0 cardmgr[2163]: socket 0: Senao SL-2011CD/SL-2011CDPLUS another syslog tail (kernel 2.6.17): kernel: pccard: PCMCIA card inserted into slot 0 kernel: pcmcia: registering new device pcmcia0.0 kernel: orinoco 0.15rc3 (David Gibson..... And one time I swear I saw what looked like orinoco_cs and hostap_cs loading at same time, which I am thinking might be the problem? -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-tp600e.13 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages linux-source-2.6.17 depends on: ii binutils 2.17-2 The GNU assembler, linker and bina ii bzip2 1.0.3-3 high-quality block-sorting file co Versions of packages linux-source-2.6.17 recommends: ii gcc 4:4.1.1-5 The GNU C compiler ii libc6-dev [libc-dev] 2.3.6-15 GNU C Library: Development Librari ii make 3.81-2 The GNU version of the "make" util -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
