Package: kernel-image-2.6.8-3-686 Version: 2.6.8-16sarge3 Severity: critical Justification: breaks the whole system
After upgrading from the "-16sarge2" to "-16sarge3" kernel image, my system frequently hangs during USB initialization at boot time. The only attached USB device is an APC SmartUPS-1500. The hang did not occur ever with "-sarge2" or 2.6.8-2 . I do not know how to obtain an exact capture of the displayed messages, but the following should be reasonably close: ehci_hcd: USB2 EHCI Controller drivers/usb/input/hid-core.c: ctrl urb status -84 received drivers/usb/input/hid-core.c: ctrl urb status -71 received drivers/usb/input/hid-core.c: ctrl urb status -71 received drivers/usb/input/hid-core.c: ctrl urb status -71 received usb 1-2: USB disconnect, address 2 drivers/usb/input/hid-core.c: ctrl urb status -108 received drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed Here are the relvant parts of /proc/bus/usb/devices when running under 2.6.8-2: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc=106/900 us (12%), #Int= 1, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8-2-686 uhci_hcd S: Product=Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 S: SerialNumber=0000:00:1d.0 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=051d ProdID=0002 Rev= 0.06 S: Manufacturer=American Power Conversion S: Product=Smart-UPS 1500 FW:601.3.D USB FW:1.5 S: SerialNumber=AS0314331712 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 30mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl=100ms -- System Information: Debian Release: 3.1 Architecture: i386 (i686) Kernel: Linux 2.6.8-2-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages kernel-image-2.6.8-3-686 depends on: ii coreutils [fileutils] 5.2.1-2 The GNU core utilities ii fileutils 5.2.1-2 The GNU file management utilities ii initrd-tools 0.1.81.1 tools to create initrd image for p ii module-init-tools 3.2-pre1-2 tools for managing Linux kernel mo -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
