Package: linux-image-2.6.17-1-amd64-k8 Version: 2.6.17-2 Severity: normal
Ksymoops output below: Unable to handle kernel NULL pointer dereference at 0000000000000080 RIP: <ffffffff8021464b>{__page_set_anon_rmap+0} Oops: 0000 [1] CPU 0 Pid: 21650, comm: abiword Not tainted 2.6.17-1-amd64-k8 #1 RIP: 0010:[<ffffffff8021464b>] <ffffffff8021464b>{__page_set_anon_rmap+0} Using defaults from ksymoops -t elf64-x86-64 -a i386:x86-64 RSP: 0000:ffff810027ad9df0 EFLAGS: 00010297 RAX: 0000000000000004 RBX: 800000001b4f0067 RCX: ffff810000000000 RDX: 0000000003e20008 RSI: 0000000000000000 RDI: ffff8100015f9480 RBP: ffff8100015f9480 R08: 0000000000000000 R09: 0000000000007b64 R10: 0000000000000000 R11: 0000000000000001 R12: ffff810009117ad8 R13: ffff81002371b100 R14: 0000000003e20008 R15: ffff81003f2e1b80 FS: 00002b4f53603100(0000) GS:ffffffff804cc000(0000) knlGS:00000000f72b09d0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 000000000e7f6000 CR4: 00000000000006e0 ffff81003b2ca0f8 0000000000000000 0000000300000007 0000000400000001 0000000800000001 0000000c00000003 Call Trace: <ffffffff80208298>{__handle_mm_fault+562} <ffffffff8020a0c4>{do_page_fault+1082} <ffffffff802247fe>{do_brk+452} <ffffffff803a5328>{unix_ioctl+173} <ffffffff8035e056>{sock_ioctl+449} <ffffffff80252611>{error_exit+0} Code: 48 8b 86 80 00 00 00 48 85 c0 75 0a 0f 0b 68 fa 0d 3d 80 c2 >>RIP; ffffffff8021464b <__page_set_anon_rmap+0/3f> <===== >>RBX; 800000001b4f0067 <phys_startup_64+800000001b2eff67/ffffffff7fffff00> >>RCX; ffff810000000000 <phys_startup_64+ffff80ffffdfff00/ffffffff7fffff00> >>RDX; 0000000003e20008 <phys_startup_64+3c1ff08/ffffffff7fffff00> >>RDI; ffff8100015f9480 <phys_startup_64+ffff8100013f9380/ffffffff7fffff00> >>RBP; ffff8100015f9480 <phys_startup_64+ffff8100013f9380/ffffffff7fffff00> >>R12; ffff810009117ad8 <phys_startup_64+ffff810008f179d8/ffffffff7fffff00> >>R13; ffff81002371b100 <phys_startup_64+ffff81002351b000/ffffffff7fffff00> >>R14; 0000000003e20008 <phys_startup_64+3c1ff08/ffffffff7fffff00> >>R15; ffff81003f2e1b80 <phys_startup_64+ffff81003f0e1a80/ffffffff7fffff00> Trace; ffffffff80208298 <__handle_mm_fault+232/843> Trace; ffffffff8020a0c4 <do_page_fault+43a/7b5> Trace; ffffffff803a5328 <unix_ioctl+ad/b4> Trace; ffffffff80252611 <error_exit+0/84> Code; ffffffff8021464b <__page_set_anon_rmap+0/3f> 0000000000000000 <_RIP>: Code; ffffffff8021464b <__page_set_anon_rmap+0/3f> <===== 0: 48 8b 86 80 00 00 00 mov 0x80(%rsi),%rax <===== Code; ffffffff80214652 <__page_set_anon_rmap+7/3f> 7: 48 85 c0 test %rax,%rax Code; ffffffff80214655 <__page_set_anon_rmap+a/3f> a: 75 0a jne 16 <_RIP+0x16> Code; ffffffff80214657 <__page_set_anon_rmap+c/3f> c: 0f 0b ud2a Code; ffffffff80214659 <__page_set_anon_rmap+e/3f> e: 68 fa 0d 3d 80 pushq $0xffffffff803d0dfa Code; ffffffff8021465e <__page_set_anon_rmap+13/3f> 13: c2 00 00 retq $0x0 CR2: 0000000000000080 # cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 31 model name : AMD Athlon(tm) 64 Processor 3000+ stepping : 0 cpu MHz : 1809.279 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow lahf_lm bogomips : 3620.78 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp # lsmod Module Size Used by nls_iso8859_1 5696 1 isofs 37452 1 ipv6 271840 17 ipip 11944 0 tunnel4 4168 1 ipip dm_mod 62256 0 ide_generic 1600 0 [permanent] snd_intel8x0 36648 3 snd_ac97_codec 111512 1 snd_intel8x0 snd_ac97_bus 3072 1 snd_ac97_codec snd_pcm_oss 44960 0 snd_mixer_oss 18880 1 snd_pcm_oss snd_mpu401 9704 0 snd_mpu401_uart 8960 1 snd_mpu401 analog 11488 0 snd_rawmidi 28192 1 snd_mpu401_uart snd_seq_device 9872 1 snd_rawmidi ns558 5760 0 snd_pcm 96460 4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 25416 2 snd_pcm psmouse 43344 0 snd 63720 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer evdev 11712 0 gameport 17168 3 analog,ns558 i2c_nforce2 8128 0 soundcore 11616 1 snd snd_page_alloc 11024 2 snd_intel8x0,snd_pcm serio_raw 7940 0 pcspkr 3456 0 parport_pc 38184 0 parport 41868 1 parport_pc i2c_core 24856 1 i2c_nforce2 floppy 66504 0 ext3 139536 1 jbd 58600 1 ext3 mbcache 10056 1 ext3 ide_cd 42592 1 cdrom 37480 1 ide_cd ide_disk 17472 3 sata_nv 11204 0 libata 75800 1 sata_nv scsi_mod 155632 1 libata amd74xx 15344 0 [permanent] generic 5764 0 [permanent] ohci_hcd 20932 0 ehci_hcd 32712 0 ide_core 147616 5 ide_generic,ide_cd,ide_disk,amd74xx,generic forcedeth 31116 0 thermal 16464 0 processor 26580 1 thermal fan 5640 0 Regards, Vitaliy -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing'), (300, 'unstable'), (200, 'dapper') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-1-amd64-k8 Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Versions of packages linux-image-2.6.17-1-amd64-k8 depends on: ii e2fsprogs 1.39-1 ext2 file system utilities and lib ii initramfs-tools [linux-initra 0.66 tools for generating an initramfs ii module-init-tools 3.2.2-3 tools for managing Linux kernel mo linux-image-2.6.17-1-amd64-k8 recommends no packages. -- debconf information: linux-image-2.6.17-1-amd64-k8/preinst/elilo-initrd-2.6.17-1-amd64-k8: true linux-image-2.6.17-1-amd64-k8/postinst/create-kimage-link-2.6.17-1-amd64-k8: true linux-image-2.6.17-1-amd64-k8/prerm/would-invalidate-boot-loader-2.6.17-1-amd64-k8: true linux-image-2.6.17-1-amd64-k8/preinst/abort-install-2.6.17-1-amd64-k8: linux-image-2.6.17-1-amd64-k8/preinst/bootloader-initrd-2.6.17-1-amd64-k8: true linux-image-2.6.17-1-amd64-k8/postinst/old-system-map-link-2.6.17-1-amd64-k8: true linux-image-2.6.17-1-amd64-k8/preinst/failed-to-move-modules-2.6.17-1-amd64-k8: linux-image-2.6.17-1-amd64-k8/postinst/old-dir-initrd-link-2.6.17-1-amd64-k8: true linux-image-2.6.17-1-amd64-k8/postinst/depmod-error-2.6.17-1-amd64-k8: false linux-image-2.6.17-1-amd64-k8/postinst/bootloader-error-2.6.17-1-amd64-k8: linux-image-2.6.17-1-amd64-k8/preinst/abort-overwrite-2.6.17-1-amd64-k8: linux-image-2.6.17-1-amd64-k8/preinst/overwriting-modules-2.6.17-1-amd64-k8: true linux-image-2.6.17-1-amd64-k8/preinst/lilo-initrd-2.6.17-1-amd64-k8: true linux-image-2.6.17-1-amd64-k8/postinst/bootloader-test-error-2.6.17-1-amd64-k8: linux-image-2.6.17-1-amd64-k8/preinst/lilo-has-ramdisk: linux-image-2.6.17-1-amd64-k8/postinst/old-initrd-link-2.6.17-1-amd64-k8: true linux-image-2.6.17-1-amd64-k8/postinst/depmod-error-initrd-2.6.17-1-amd64-k8: false linux-image-2.6.17-1-amd64-k8/preinst/already-running-this-2.6.17-1-amd64-k8: linux-image-2.6.17-1-amd64-k8/postinst/kimage-is-a-directory: linux-image-2.6.17-1-amd64-k8/prerm/removing-running-kernel-2.6.17-1-amd64-k8: true linux-image-2.6.17-1-amd64-k8/preinst/initrd-2.6.17-1-amd64-k8:
Bootdata ok (command line is root=/dev/hda3 ro console=tty0 ) Linux version 2.6.17-1-amd64-k8 (Debian 2.6.17-2) ([EMAIL PROTECTED]) (gcc version 4.1.2 20060613 (prerelease) (Debian 4.1.1-5)) #1 Thu Jun 29 22:46:10 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.3 present. ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7560 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff30c0 ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000003fff9880 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff9980 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff97c0 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 On node 0 totalpages: 257420 DMA zone: 2915 pages, LIFO batch:0 DMA32 zone: 254505 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Checking aperture... CPU 0: aperture @ 428000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Built 1 zonelists Kernel command line: root=/dev/hda3 ro console=tty0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 1809.279 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 1022832k/1048512k available (1722k kernel code, 24972k reserved, 783k data, 156k init) Calibrating delay using timer specific routine.. 3620.78 BogoMIPS (lpj=7241569) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 Using local APIC timer interrupts. result 12564446 Detected 12.564 MHz APIC timer. testing NMI watchdog ... OK. checking if image is initramfs... it is Freeing initrd memory: 4922k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 PCI: No mmconfig possible on device 0:18 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: ACPI device : hid PNP0A08 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0700 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0401 pnp: ACPI device : hid PNP0F13 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNPB006 pnp: ACPI device : hid PNPB02F pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C01 pnp: PnP ACPI: found 16 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@vger.kernel.org cc [EMAIL PROTECTED]) PCI-DMA: Disabling IOMMU. pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:01' and the driver 'system' pnp: 00:01: ioport range 0x4000-0x407f could not be reserved pnp: 00:01: ioport range 0x4080-0x40ff has been reserved pnp: 00:01: ioport range 0x4400-0x447f has been reserved pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved pnp: 00:01: ioport range 0x4800-0x487f has been reserved pnp: 00:01: ioport range 0x4880-0x48ff has been reserved pnp: match found with the PnP device '00:02' and the driver 'system' pnp: match found with the PnP device '00:0e' and the driver 'system' pnp: match found with the PnP device '00:0f' and the driver 'system' PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: c8000000-cfffffff PREFETCH window: c0000000-c7ffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1152044253.832:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:0b.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:08' and the driver 'serial' 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A isa bounce pool size: 16 pages RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize usbmon: debugfs is not available pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:0b' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:0a' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI wakeup devices: HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 PS2M PS2K ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 156k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (40 C) forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 GSI 16 sharing vector 0xD9 and IRQ 16 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 GSI 17 sharing vector 0xE1 and IRQ 17 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 225, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 GSI 18 sharing vector 0xE9 and IRQ 18 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 233, io mem 0xd0004000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected SCSI subsystem initialized libata version 1.20 loaded. sata_nv 0000:00:07.0: version 0.8 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 GSI 19 sharing vector 0x32 and IRQ 19 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 50 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 50 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 50 ata1: SATA link down (SStatus 0) scsi0 : sata_nv ata2: SATA link down (SStatus 0) scsi1 : sata_nv ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 217 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 217 ata3: SATA link down (SStatus 0) scsi2 : sata_nv ata4: SATA link down (SStatus 0) scsi3 : sata_nv NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: SAMSUNG SP1203N, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: _NEC DV-5800C, ATAPI CD/DVD-ROM drive hdd: BENQ DVD DD DW1620, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 pnp: the driver 'parport_pc' has been registered pnp: match found with the PnP device '00:09' and the driver 'parport_pc' parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 pnp: the driver 'ns558' has been registered pnp: match found with the PnP device '00:0d' and the driver 'ns558' gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 913kHz ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:04.0 to 64 intel8x0_measure_ac97_clock: measured 54624 usecs intel8x0: clocking to 46960 input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 pnp: the driver 'mpu401' has been registered pnp: match found with the PnP device '00:0c' and the driver 'mpu401' Adding 987988k swap on /dev/hda2. Priority:-1 extents:1 across:987988k EXT3 FS on hda3, internal journal device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [EMAIL PROTECTED] IPv4 over IPv4 tunneling driver NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown end_request: I/O error, dev hdc, sector 64 isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root Unable to handle kernel NULL pointer dereference at 0000000000000080 RIP: <ffffffff8021464b>{__page_set_anon_rmap+0} PGD 31de3067 PUD 3b2ca067 PMD 0 Oops: 0000 [1] CPU 0 Modules linked in: nls_iso8859_1 isofs ipv6 ipip tunnel4 dm_mod ide_generic snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_mpu401 snd_mpu401_uart analog snd_rawmidi snd_seq_device ns558 snd_pcm snd_timer psmouse snd evdev gameport i2c_nforce2 soundcore snd_page_alloc serio_raw pcspkr parport_pc parport i2c_core floppy ext3 jbd mbcache ide_cd cdrom ide_disk sata_nv libata scsi_mod amd74xx generic ohci_hcd ehci_hcd ide_core forcedeth thermal processor fan Pid: 21650, comm: abiword Not tainted 2.6.17-1-amd64-k8 #1 RIP: 0010:[<ffffffff8021464b>] <ffffffff8021464b>{__page_set_anon_rmap+0} RSP: 0000:ffff810027ad9df0 EFLAGS: 00010297 RAX: 0000000000000004 RBX: 800000001b4f0067 RCX: ffff810000000000 RDX: 0000000003e20008 RSI: 0000000000000000 RDI: ffff8100015f9480 RBP: ffff8100015f9480 R08: 0000000000000000 R09: 0000000000007b64 R10: 0000000000000000 R11: 0000000000000001 R12: ffff810009117ad8 R13: ffff81002371b100 R14: 0000000003e20008 R15: ffff81003f2e1b80 FS: 00002b4f53603100(0000) GS:ffffffff804cc000(0000) knlGS:00000000f72b09d0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 000000000e7f6000 CR4: 00000000000006e0 Process abiword (pid: 21650, threadinfo ffff810027ad8000, task ffff810015597450) Stack: ffffffff80208298 0000000000000cc9 0000000103e3e000 0000000000000100 ffff81003b2ca0f8 0000000000000000 0000000300000007 0000000400000001 0000000800000001 0000000c00000003 Call Trace: <ffffffff80208298>{__handle_mm_fault+562} <ffffffff8020a0c4>{do_page_fault+1082} <ffffffff802247fe>{do_brk+452} <ffffffff803a5328>{unix_ioctl+173} <ffffffff8035e056>{sock_ioctl+449} <ffffffff80252611>{error_exit+0} Code: 48 8b 86 80 00 00 00 48 85 c0 75 0a 0f 0b 68 fa 0d 3d 80 c2 RIP <ffffffff8021464b>{__page_set_anon_rmap+0} RSP <ffff810027ad9df0> CR2: 0000000000000080