Package: linux-image-2.6.15-1-486 Version: 2.6.15-8 Severity: normal The "Sweex USB Webcam 300K" with bus ID "0c45:608f Microdia" is recognised but the video device that is set up doesn't work.
Xawtv: [EMAIL PROTECTED]:~$ xawtv This is xawtv-3.94, running on Linux/i686 (2.6.15-1-486) can't open /dev/video0: Message too long v4l-conf had some trouble, trying to continue anyway v4l2: open /dev/video0: Message too long v4l2: open /dev/video0: Message too long v4l: open /dev/video0: Message too long no video grabber device available [EMAIL PROTECTED]:~$ cat: debian:/home/aa# cat /dev/video0 cat: /dev/video0: Message too long debian:/home/aa# lsusb: Bus 002 Device 005: ID 0c45:608f Microdia /var/log/messages on connection: May 29 11:42:48 debian kernel: ohci_hcd 0000:00:02.1: wakeup May 29 11:42:49 debian kernel: usb 2-3: new full speed USB device using ohci_hcd and address 4 May 29 11:42:49 debian kernel: usb 2-3: SN9C103 PC Camera Controller detected (vid/pid 0x0C45/0x608F) May 29 11:42:49 debian kernel: usb 2-3: OV7630 image sensor detected May 29 11:42:50 debian kernel: usb 2-3: Initialization succeeded May 29 11:42:50 debian kernel: usb 2-3: V4L2 device registered as /dev/video0 May 29 11:42:50 debian kernel: usb 2-3: Optional device control through 'sysfs' interface ready /var/log/messages on disconnection: May 29 11:43:32 debian kernel: usb 2-3: USB disconnect, address 4 May 29 11:43:32 debian kernel: usb 2-3: Disconnecting SN9C10x PC Camera... May 29 11:43:32 debian kernel: usb 2-3: V4L2 device /dev/video0 deregistered -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-486 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Versions of packages linux-image-2.6.15-1-486 depends on: ii initramfs-tools [linux-initra 0.60 tools for generating an initramfs ii module-init-tools 3.2.2-2 tools for managing Linux kernel mo linux-image-2.6.15-1-486 recommends no packages. -- debconf information: linux-image-2.6.15-1-486/postinst/kimage-is-a-directory: linux-image-2.6.15-1-486/preinst/initrd-2.6.15-1-486: linux-image-2.6.15-1-486/preinst/overwriting-modules-2.6.15-1-486: true linux-image-2.6.15-1-486/postinst/create-kimage-link-2.6.15-1-486: true linux-image-2.6.15-1-486/preinst/lilo-has-ramdisk: linux-image-2.6.15-1-486/preinst/lilo-initrd-2.6.15-1-486: true linux-image-2.6.15-1-486/postinst/bootloader-error-2.6.15-1-486: linux-image-2.6.15-1-486/prerm/removing-running-kernel-2.6.15-1-486: true linux-image-2.6.15-1-486/preinst/elilo-initrd-2.6.15-1-486: true linux-image-2.6.15-1-486/postinst/depmod-error-2.6.15-1-486: false linux-image-2.6.15-1-486/preinst/abort-install-2.6.15-1-486: linux-image-2.6.15-1-486/postinst/old-initrd-link-2.6.15-1-486: true linux-image-2.6.15-1-486/prerm/would-invalidate-boot-loader-2.6.15-1-486: true linux-image-2.6.15-1-486/preinst/abort-overwrite-2.6.15-1-486: linux-image-2.6.15-1-486/postinst/old-dir-initrd-link-2.6.15-1-486: true linux-image-2.6.15-1-486/postinst/bootloader-test-error-2.6.15-1-486: linux-image-2.6.15-1-486/preinst/bootloader-initrd-2.6.15-1-486: true linux-image-2.6.15-1-486/postinst/old-system-map-link-2.6.15-1-486: true linux-image-2.6.15-1-486/preinst/already-running-this-2.6.15-1-486: linux-image-2.6.15-1-486/preinst/failed-to-move-modules-2.6.15-1-486: linux-image-2.6.15-1-486/postinst/depmod-error-initrd-2.6.15-1-486: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
