Package: linux-image-2.6.16-1-686
Version: 2.6.16-12
Followup-For: Bug #361197
I've no sound, too. It is very boring ;(
______
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ
5
never read ISV3 and ISV4 from AC'97
ACPI: PCI interrupt for device 0000:00:08.0 disabled
CS4281: probe of 0000:00:08.0 failed with error -5
______
0000:00:08.0 Multimedia audio controller: Cirrus Logic Crystal CS4281 PCI Audio
(rev 01)
Subsystem: Toshiba America Info Systems: Unknown device ff00
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fc010000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D3 PME-Enable- DSel=0 DScale=0 PME-
______
0000:00:08.0 0401: 1013:6005 (rev 01)
______
lspci -xxx -s 00:08.0
0000:00:08.0 Multimedia audio controller: Cirrus Logic Crystal CS4281 PCI Audio
(rev 01)
00: 13 10 05 60 02 00 10 02 01 00 01 04 00 40 00 00
10: 00 00 01 fc 00 00 00 fc 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 79 11 00 ff
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 04 18
40: 01 00 22 7e 03 00 00 00 03 00 00 00 03 00 00 00
50: 03 00 00 00 03 00 00 00 03 00 00 00 03 00 00 00
60: 03 00 00 00 03 00 00 00 03 00 00 00 03 00 00 00
70: 03 00 00 00 03 00 00 00 03 00 00 00 03 00 00 00
80: 03 00 00 00 03 00 00 00 03 00 00 00 03 00 00 00
90: 03 00 00 00 03 00 00 00 03 00 00 00 03 00 00 00
a0: 03 00 00 00 03 00 00 00 03 00 00 00 03 00 00 00
b0: 03 00 00 00 03 00 00 00 03 00 00 00 03 00 00 00
c0: 03 00 00 00 03 00 00 00 03 00 00 00 03 00 00 00
d0: 03 00 00 00 03 00 00 00 03 00 00 00 03 00 00 00
e0: 81 42 00 00 00 03 00 00 04 00 00 00 05 00 00 00
f0: 01 00 00 00 00 00 00 00 00 00 00 00 79 11 00 ff
-- System Information:
Debian Release: sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-1-686
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6.16-1-686 depends on:
ii initramfs-tools [linux-initra 0.60 tools for generating an initramfs
ii module-init-tools 3.2.2-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.16-1-686 recommends:
ii libc6-i686 2.3.6-7 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.16-1-686/preinst/initrd-2.6.16-1-686:
linux-image-2.6.16-1-686/postinst/create-kimage-link-2.6.16-1-686: true
linux-image-2.6.16-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.16-1-686/prerm/removing-running-kernel-2.6.16-1-686: true
linux-image-2.6.16-1-686/postinst/old-dir-initrd-link-2.6.16-1-686: true
linux-image-2.6.16-1-686/postinst/depmod-error-initrd-2.6.16-1-686: false
linux-image-2.6.16-1-686/preinst/lilo-initrd-2.6.16-1-686: true
linux-image-2.6.16-1-686/postinst/old-system-map-link-2.6.16-1-686: true
linux-image-2.6.16-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.16-1-686/preinst/bootloader-initrd-2.6.16-1-686: true
* linux-image-2.6.16-1-686/preinst/already-running-this-2.6.16-1-686:
linux-image-2.6.16-1-686/preinst/overwriting-modules-2.6.16-1-686: true
linux-image-2.6.16-1-686/postinst/old-initrd-link-2.6.16-1-686: true
linux-image-2.6.16-1-686/preinst/abort-overwrite-2.6.16-1-686:
linux-image-2.6.16-1-686/postinst/depmod-error-2.6.16-1-686: false
linux-image-2.6.16-1-686/preinst/failed-to-move-modules-2.6.16-1-686:
linux-image-2.6.16-1-686/preinst/elilo-initrd-2.6.16-1-686: true
linux-image-2.6.16-1-686/prerm/would-invalidate-boot-loader-2.6.16-1-686: true
linux-image-2.6.16-1-686/postinst/bootloader-error-2.6.16-1-686:
linux-image-2.6.16-1-686/preinst/abort-install-2.6.16-1-686:
linux-image-2.6.16-1-686/postinst/bootloader-test-error-2.6.16-1-686:
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
