Package: linux-image-2.6.16-1-powerpc Version: 2.6.16-1 Severity: normal While booting into 2.6.16-1-powerpc for the first time, the kernel gives the following oops while trying to load snd-powermac, and the sound device is unavailable. 2.6.15-1-powerpc was ok.
Mar 27 03:28:04 localhost kernel: Oops: Kernel access of bad area, sig: 11 [#1] Mar 27 03:28:04 localhost kernel: Modules linked in: snd_powermac snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc sbp2 scsi_mod pcmcia firmware_class eth1394 tsdev yenta_socket rsrc_nonstatic pcmcia_core ohci_hcd sungem usbcore sungem_phy airport orinoco ide_cd hermes uninorth_agp agpgart cdrom ohci1394 ieee1394 ext3 jbd mbcache ide_disk evdev Mar 27 03:28:04 localhost kernel: NIP: C01A2D7C LR: F26F43F4 CTR: C01A2D50 Mar 27 03:28:04 localhost kernel: REGS: eead7cc0 TRAP: 0300 Not tainted (2.6.16-1-powerpc) Mar 27 03:28:04 localhost kernel: MSR: 00009032 <EE,ME,IR,DR> CR: 22008244 XER: 20000000 Mar 27 03:28:04 localhost kernel: DAR: 00000002, DSISR: 40000000 Mar 27 03:28:04 localhost kernel: TASK = c196b950[1266] 'modprobe' THREAD: eead6000 Mar 27 03:28:04 localhost kernel: GPR00: F26F43F4 EEAD7D70 C196B950 00000000 00000001 00000060 00000000 00000001 Mar 27 03:28:04 localhost kernel: GPR08: 00000002 00000000 C0018BCC C01A2D50 00000000 1001E638 00000000 00000000 Mar 27 03:28:04 localhost kernel: GPR16: 00000000 00000000 100013D0 1001ECC8 3002A000 00000003 00000000 00000000 Mar 27 03:28:04 localhost kernel: GPR24: 10020CD0 00000000 10018CD4 EE93F200 EEB6FCE0 0000000A F26FD504 F26F7580 Mar 27 03:28:04 localhost kernel: NIP [C01A2D7C] i2c_smbus_write_byte_data+0x2c/0x50 Mar 27 03:28:04 localhost kernel: LR [F26F43F4] send_init_client+0x30/0x90 [snd_powermac] Mar 27 03:28:04 localhost kernel: Call Trace: Mar 27 03:28:04 localhost kernel: [EEAD7D70] [C0053AA0] setup_irq+0x12c/0x148 (unreliable) Mar 27 03:28:04 localhost kernel: [EEAD7DB0] [F26F43F4] send_init_client+0x30/0x90 [snd_powermac] Mar 27 03:28:04 localhost kernel: [EEAD7DD0] [F233BF00] snd_pmac_tumbler_post_init+0x30/0x68 [snd_powermac] Mar 27 03:28:04 localhost kernel: [EEAD7DE0] [F233A228] snd_pmac_probe+0x1a8/0x324 [snd_powermac] Mar 27 03:28:04 localhost kernel: [EEAD7E10] [C017D46C] platform_drv_probe+0x20/0x30 Mar 27 03:28:04 localhost kernel: [EEAD7E20] [C017B460] driver_probe_device+0x98/0x100 Mar 27 03:28:04 localhost kernel: [EEAD7E40] [C017A8FC] bus_for_each_drv+0x50/0x98 Mar 27 03:28:04 localhost kernel: [EEAD7E70] [C017B538] device_attach+0x6c/0xa8 Mar 27 03:28:04 localhost kernel: [EEAD7E90] [C017A97C] bus_add_device+0x38/0xf4 Mar 27 03:28:04 localhost kernel: [EEAD7EB0] [C0179690] device_add+0xe0/0x174 Mar 27 03:28:04 localhost kernel: [EEAD7ED0] [C017D2B8] platform_device_add+0x118/0x160 Mar 27 03:28:04 localhost kernel: [EEAD7EF0] [C017D844] platform_device_register_simple+0x4c/0x78 Mar 27 03:28:04 localhost kernel: [EEAD7F10] [F233A044] alsa_card_pmac_init+0x44/0x80 [snd_powermac] Mar 27 03:28:04 localhost kernel: [EEAD7F20] [C004B910] sys_init_module+0x15c/0x2c0 Mar 27 03:28:04 localhost kernel: [EEAD7F40] [C000FF44] ret_from_syscall+0x0/0x40 Mar 27 03:28:04 localhost kernel: --- Exception: c01 at 0xff6e708 Mar 27 03:28:04 localhost kernel: LR = 0x10003e30 Mar 27 03:28:04 localhost kernel: Instruction dump: Mar 27 03:28:04 localhost kernel: 4e800020 7c0802a6 9421ffc0 7c691b78 7c872378 38c00000 39000002 98a10008 Mar 27 03:28:04 localhost kernel: 90010044 60000000 60000000 60000000 <a0a30002> a0890004 39210008 80630008 -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing'), (400, 'experimental'), (50, 'unstable') Architecture: powerpc (ppc) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-powerpc Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages linux-image-2.6.16-1-powerpc depends on: ii mkvmlinuz 18 create a kernel to boot a PowerPC ii module-init-tools 3.2.2-2 tools for managing Linux kernel mo ii yaird [linux-initramfs-tool] 0.0.12-8 Yet Another mkInitRD linux-image-2.6.16-1-powerpc recommends no packages. -- debconf information: linux-image-2.6.16-1-powerpc/preinst/already-running-this-2.6.16-1-powerpc: linux-image-2.6.16-1-powerpc/preinst/initrd-2.6.16-1-powerpc: linux-image-2.6.16-1-powerpc/preinst/overwriting-modules-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/postinst/old-system-map-link-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/prerm/would-invalidate-boot-loader-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/postinst/bootloader-test-error-2.6.16-1-powerpc: linux-image-2.6.16-1-powerpc/postinst/depmod-error-initrd-2.6.16-1-powerpc: false linux-image-2.6.16-1-powerpc/preinst/lilo-initrd-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/preinst/failed-to-move-modules-2.6.16-1-powerpc: linux-image-2.6.16-1-powerpc/postinst/create-kimage-link-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/preinst/abort-install-2.6.16-1-powerpc: linux-image-2.6.16-1-powerpc/postinst/old-initrd-link-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/postinst/bootloader-error-2.6.16-1-powerpc: linux-image-2.6.16-1-powerpc/postinst/depmod-error-2.6.16-1-powerpc: false linux-image-2.6.16-1-powerpc/preinst/elilo-initrd-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/postinst/old-dir-initrd-link-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/preinst/abort-overwrite-2.6.16-1-powerpc: linux-image-2.6.16-1-powerpc/postinst/kimage-is-a-directory: linux-image-2.6.16-1-powerpc/preinst/lilo-has-ramdisk: linux-image-2.6.16-1-powerpc/prerm/removing-running-kernel-2.6.16-1-powerpc: true linux-image-2.6.16-1-powerpc/preinst/bootloader-initrd-2.6.16-1-powerpc: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
