reassign 351709 linux-2.6 thanks On Feb 06, Jan Christoph Uhde <[EMAIL PROTECTED]> wrote:
> The first time i plug an UMS device into my computer the syslog > following messages: Apparently udev loaded all the drivers you need, so it's out of the picture. So if your device is not broken, as far as I can tell this is a kernel bug: > Feb 6 22:28:24 obi kernel: usb 1-1: new high speed USB device using ehci_hcd > and address 6 > Feb 6 22:28:31 obi kernel: usb 1-1: unable to read config index 0 > descriptor/start > Feb 6 22:28:31 obi kernel: usb 1-1: can't read configurations, error -110 > Feb 6 22:28:31 obi kernel: usb 1-1: new high speed USB device using ehci_hcd > and address 7 > Feb 6 22:28:31 obi kernel: usb-storage: USB Mass Storage device detected > Feb 6 22:28:31 obi kernel: usb-storage: -- associate_dev > Feb 6 22:28:31 obi kernel: usb-storage: Vendor: 0x0781, Product: 0x5150, > Revision: 0x0020 > Feb 6 22:28:31 obi kernel: usb-storage: Interface Subclass: 0x06, Protocol: > 0x50 > Feb 6 22:28:31 obi kernel: usb-storage: Transport: Bulk > Feb 6 22:28:31 obi kernel: usb-storage: Protocol: Transparent SCSI > Feb 6 22:28:31 obi kernel: scsi2 : SCSI emulation for USB Mass Storage > devices > Feb 6 22:28:31 obi kernel: usb-storage: *** thread sleeping. > Feb 6 22:28:31 obi kernel: usb-storage: device found at 7 > Feb 6 22:28:31 obi kernel: usb-storage: waiting for device to settle before > scanning > Feb 6 22:28:36 obi kernel: usb-storage: usb_stor_control_msg: rq=fe > rqtype=a1 value=0000 index=00 len=1 > Feb 6 22:28:36 obi kernel: usb-storage: GetMaxLUN command result is 1, data > is 0 > Feb 6 22:28:36 obi kernel: usb-storage: queuecommand called > Feb 6 22:28:36 obi kernel: usb-storage: *** thread awakened. > Feb 6 22:28:36 obi kernel: usb-storage: Command INQUIRY (6 bytes) > Feb 6 22:28:36 obi kernel: usb-storage: 12 00 00 00 24 00 > Feb 6 22:28:36 obi kernel: usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 > F 128 Trg 0 LUN 0 CL 6 > Feb 6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 > bytes > Feb 6 22:28:36 obi kernel: usb-storage: Status code 0; transferred 31/31 > Feb 6 22:28:36 obi kernel: usb-storage: -- transfer complete > Feb 6 22:28:36 obi kernel: usb-storage: Bulk command transfer result=0 > Feb 6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer > 36 bytes, 1 entries > Feb 6 22:28:36 obi kernel: usb-storage: Status code 0; transferred 36/36 > Feb 6 22:28:36 obi kernel: usb-storage: -- transfer complete > Feb 6 22:28:36 obi kernel: usb-storage: Bulk data transfer result 0x0 > Feb 6 22:28:36 obi kernel: usb-storage: Attempting to get CSW... > Feb 6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 > bytes > Feb 6 22:28:36 obi kernel: usb-storage: Status code 0; transferred 13/13 > Feb 6 22:28:36 obi kernel: usb-storage: -- transfer complete > Feb 6 22:28:36 obi kernel: usb-storage: Bulk status result = 0 > Feb 6 22:28:36 obi kernel: usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 > Stat 0x0 > Feb 6 22:28:36 obi kernel: usb-storage: scsi cmd done, result=0x0 > Feb 6 22:28:36 obi kernel: usb-storage: *** thread sleeping. > Feb 6 22:28:36 obi kernel: Vendor: SanDisk Model: Cruzer Mini Rev: > 0.2 > Feb 6 22:28:36 obi kernel: Type: Direct-Access ANSI > SCSI revision: 02 > Feb 6 22:28:36 obi kernel: usb-storage: queuecommand called > Feb 6 22:28:36 obi kernel: usb-storage: *** thread awakened. > Feb 6 22:28:36 obi kernel: usb-storage: Command TEST_UNIT_READY (6 bytes) > Feb 6 22:28:36 obi kernel: usb-storage: 00 00 00 00 00 00 > Feb 6 22:28:36 obi kernel: usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 > F 0 Trg 0 LUN 0 CL 6 > Feb 6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 > bytes > Feb 6 22:28:36 obi kernel: usb-storage: Status code 0; transferred 31/31 > Feb 6 22:28:36 obi kernel: usb-storage: -- transfer complete > Feb 6 22:28:36 obi kernel: usb-storage: Bulk command transfer result=0 > Feb 6 22:28:36 obi kernel: usb-storage: Attempting to get CSW... > Feb 6 22:28:36 obi kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 > bytes > Feb 6 22:28:39 obi udevd-event[6258]: wait_for_sysfs: waiting for > '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0/bus' > failed > Feb 6 22:28:43 obi udevd-event[6258]: wait_for_sysfs: waiting for > '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0/ioerr_cnt' > failed > Feb 6 22:29:06 obi kernel: usb-storage: command_abort called > Feb 6 22:29:06 obi kernel: usb-storage: usb_stor_stop_transport called > Feb 6 22:29:06 obi kernel: usb-storage: -- cancelling URB > Feb 6 22:29:06 obi kernel: usb-storage: Status code -104; transferred 0/13 > Feb 6 22:29:06 obi kernel: usb-storage: -- transfer cancelled > Feb 6 22:29:06 obi kernel: usb-storage: Bulk status result = 4 > Feb 6 22:29:06 obi kernel: usb-storage: -- command was aborted > Feb 6 22:29:06 obi kernel: usb 1-1: reset high speed USB device using > ehci_hcd and address 7 > > > USB Controller: > 0000:00:02.0 USB Controller: nVidia Corporation CK804 USB Controller > (rev a2) (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 > Memory at d5001000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > > 0000:00:02.1 USB Controller: nVidia Corporation CK804 USB Controller > (rev a3) (prog-if 20 [EHCI]) > Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19 > Memory at feb00000 (32-bit, non-prefetchable) [size=256] > Capabilities: [44] #0a [2098] > Capabilities: [80] Power Management version 2 > Kernel: Linux 2.6.15.2obi-amd64 -- ciao, Marco -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
