Your message dated Sun, 26 Jul 2026 14:27:34 +0200
with message-id <[email protected]>
and subject line Re: Status, probable solution.
has caused the Debian Bug report #1141185,
regarding linux-image-6.12.94+deb13-amd64: Occasional read problems in
RAID/LVM/ext4 stack when under stress.
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
1141185: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1141185
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 6.12.94-1
Severity: normal
X-Debbugs-Cc: [email protected]
Dear Maintainer,
I have four four terabyte hard drives. Each has one partition on it. The four
partitions comprise a RAID 5 array using mdadm. On top of that, LUKS
encryption, then LVM with ext4 logical volumes.
On one LVM partition I have a number of backup files, tarred, bzipped, and
sha256 and sha512 summed. I have a script which will find checksum files, and
execute the appropriate program to test the archives. It puts each program into
the background, parallising any number of checksum tests.
Starting early in May, the script found an error in one or more files out of
several. Results are inconsistent: one pass may find an error in a given file,
the next pass not find any errors in it. Running checksums manually, one at a
time, does not turn up an error. Running "tar tvf" finds no error in a suspect
tarball. Running "bunzip2 -t" also turns up no error. Only running the script
turns up any errors.
I create two checksum files when I create the backups, for sha256 and sha512.
After this problem surfaced, I then made two new checksum files of a suspect
file. The two checksum file pairs (e.g. both sha512sum files) show the same
checksums. The script now tests using both the old and new checksum files.
Sometime only one pair of checksum files fail the suspect file.
In addition to all of that, I also get the occasional "bad message" error. I
have no idea what that means, but an fsck seems to deal with it.
To be thorough, I have run extended SMART tests on the hard drives, kicked
mdadm into testing the RAID array, and fscked the LVM partitions on the RAID
array. Only fsck turned up issues, and that has not stopped. SMART showed
problems with one hard drive. I replaced the drive. That did not solve this
problem. However, while the drive was "failed" and before the replacement
installed, the error count went down noticeably.
I also back some of this up to offsite USB drives. I ran the script on one of
those, using this computer, and a different computer. No errors reported.
I believe a successful work-around is to install the backports kernel,
linux-image-7.0.10+deb13-amd64 et seq. This problem went away, although another
similar problem has occurred with that kernel.
There is extensive discussion of this problem on the Debian user list, under
the subject "Schrödinger's hash", starting at
https://lists.debian.org/debian-user/2026/05/msg00377.html
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: ASUS
product_name: All Series
product_version: System Version
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 2404
board_vendor: ASUSTeK COMPUTER INC.
board_name: H97M-E
board_version: Rev X.0x
** Configuration for modprobe:
blacklist arkfb
blacklist aty128fb
blacklist atyfb
blacklist radeonfb
blacklist cirrusfb
blacklist cyber2000fb
blacklist kyrofb
blacklist matroxfb_base
blacklist mb862xxfb
blacklist neofb
blacklist pm2fb
blacklist pm3fb
blacklist s3fb
blacklist savagefb
blacklist sisfb
blacklist tdfxfb
blacklist tridentfb
blacklist vt8623fb
blacklist microcode
options snd_pcsp index=-2
options cx88_alsa index=-2
options snd_atiixp_modem index=-2
options snd_intel8x0m index=-2
options snd_via82xx_modem index=-2
options md_mod start_ro=1
options bonding max_bonds=0
options dummy numdummies=0
options ifb numifbs=0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM
Controller [8086:0c00] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal
decode])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled] [16-bit]
Memory behind bridge: [disabled] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th
Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if
00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor HD Audio Controller [8086:0c0c] (rev 06) (prog-if 00 [HDA compatible])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
Region 0: Memory at f7e14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 9 Series Chipset Family USB
xHCI Controller [8086:8cb1] (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 9 Series Chipset
Family ME Interface #1 [8086:8cba]
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at f7e1d000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 9 Series Chipset Family USB
EHCI Controller #2 [8086:8cad] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f7e1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 9 Series Chipset Family HD Audio
Controller [8086:8ca0] (prog-if 00 [HDA compatible])
Subsystem: ASUSTeK Computer Inc. Device [1043:8616]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 9 Series Chipset Family PCI
Express Root Port 1 [8086:8c90] (rev d0) (prog-if 00 [Normal decode])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 2000-2fff [size=4K] [16-bit]
Memory behind bridge: df200000-df3fffff [size=2M] [32-bit]
Prefetchable memory behind bridge: df400000-df5fffff [size=2M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 9 Series Chipset Family PCI
Express Root Port 3 [8086:8c94] (rev d0) (prog-if 00 [Normal decode])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 26
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: e000-efff [size=4K] [16-bit]
Memory behind bridge: f7d00000-f7dfffff [size=1M] [32-bit]
Prefetchable memory behind bridge: f0000000-f00fffff [size=1M] [32-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.7 PCI bridge [0604]: Intel Corporation 9 Series Chipset Family PCI
Express Root Port 8 [8086:8c9e] (rev d0) (prog-if 00 [Normal decode])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 27
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: d000-dfff [size=4K] [16-bit]
Memory behind bridge: f7c00000-f7cfffff [size=1M] [32-bit]
Prefetchable memory behind bridge: [disabled] [64-bit]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 9 Series Chipset Family USB
EHCI Controller #1 [8086:8ca6] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e1a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation H97 Chipset LPC Controller
[8086:8cc6]
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 9 Series Chipset Family SATA
Controller [AHCI Mode] [8086:8c82] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 29
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e19000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 9 Series Chipset Family SMBus
Controller [8086:8ca2]
Subsystem: ASUSTeK Computer Inc. Device [1043:8534]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e18000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev
11)
Subsystem: ASUSTeK Computer Inc. AM1I-A Motherboard [1043:859e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f7d00000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 SATA controller [0106]: JMicron Technology Corp. JMB58x AHCI SATA
controller [197b:0585] (prog-if 01 [AHCI 1.0])
Subsystem: JMicron Technology Corp. Device [197b:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: I/O ports at d200 [size=128]
Region 1: I/O ports at d180 [size=128]
Region 2: I/O ports at d100 [size=128]
Region 3: I/O ports at d080 [size=128]
Region 4: I/O ports at d000 [size=128]
Region 5: Memory at f7c10000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at f7c00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8009 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:8001 Intel Corp. Integrated Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 0424:2514 Microchip Technology, Inc. (formerly SMSC) USB
2.0 Hub
Bus 003 Device 003: ID 0424:2514 Microchip Technology, Inc. (formerly SMSC) USB
2.0 Hub
Bus 003 Device 004: ID 051d:0002 American Power Conversion Uninterruptible
Power Supply
Bus 003 Device 005: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 006: ID 03f0:0972 HP, Inc HP LaserJet MFP M232-M237
Bus 003 Device 007: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 002: ID 0bc2:ab28 Seagate RSS LLC Seagate Backup Plus Portable
5TB SRD00F1
-- System Information:
Debian Release: 13.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable-security'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 7.0.12+deb13-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-6.12.94+deb13-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.148.4
ii kmod 34.2-2
ii linux-base 4.12.1
Versions of packages linux-image-6.12.94+deb13-amd64 recommends:
ii apparmor 4.1.0-1
Versions of packages linux-image-6.12.94+deb13-amd64 suggests:
pn debian-kernel-handbook <none>
pn firmware-linux-free <none>
ii grub-efi-amd64 2.12-9+deb13u2
pn linux-doc-6.12 <none>
Versions of packages linux-image-6.12.94+deb13-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-cirrus <none>
ii firmware-intel-graphics 20250410-2
pn firmware-intel-misc <none>
pn firmware-intel-sound <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-marvell-prestera <none>
pn firmware-mediatek <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netronome <none>
pn firmware-netxen <none>
pn firmware-nvidia-graphics <none>
pn firmware-qcom-soc <none>
pn firmware-qlogic <none>
ii firmware-realtek 20250410-2
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
--- Begin Message ---
On Wed, 22 Jul 2026 17:26:03 -0600 Charles Curley
<[email protected]> wrote:
> On July 6, my main drive (an SSD) died on me. I have been rebuilding
> the system since. While waiting for the replacement drive, I ran
> memtest86. Four days of that showed no problems.
>
> Current status:
>
> The old dead SSD was a SATA interface. The replacement is an m.2 SATA
> SSD. This allowed me to remove all hard drives from the added PCI SATA
> card. That now has only the DVD drive. The four RAID hard drives are
now
> attached directly to the motherboard. I have installed trixie, kernel
> 6.12.96+deb13-amd64. This is not exactly the kernel I was using when
the
> problems first appeared (6.12.94-1), but close.
>
> Testing as above shows no errors. Fscking the RAID logical volumes
> shows no errors. No-one else has chimed in observing the same thing. I
> will continue testing but I am inclined to think that the problem was
my
> hardware, not the kernel.
>
> Unless I hear otherwise in a few days I will close this bug per
> https://www.debian.org/Bugs/Developer#closing.
>
> Thank you for your responses.
I agree that this looks more like a hardware failure than a software
bug. Thank you for keeping us updated.
Ben.
--
Ben Hutchings
[W]e found...that it wasn't as easy to get programs right as we had
thought. I realized that a large part of my life from then on was going
to be spent in finding mistakes in my own programs.
- Maurice Wilkes, 1949
signature.asc
Description: This is a digitally signed message part
--- End Message ---
