Control: tags -1 - moreinfo Hi jean-Marc,
On Sat, Apr 05, 2025 at 07:22:32PM +0200, Jean-Marc LACROIX wrote: > Le 03/04/2025 à 22:19, Salvatore Bonaccorso a écrit : > > Control: severity -1 normal > > Control: tags -1 + moreinfo > > > > Hi, > > > > On Thu, Apr 03, 2025 at 12:08:27PM +0200, Jean-Marc LACROIX wrote: > > > Package: firmware-atheros > > > Version: 20230210-5 > > > Severity: grave > > > > > > Dear maintainers, > > > > > > It seems there is one régression when using Debian package > > > firmware-atheros > > > on Debian Bookworm 12.10 on one target Odroid HC1 (armhf architecture) > > > > > > My environnement is .... > > > > > > ## test 1 : current Linux kernel > > > ############################### > > > > > > ansible@hn-odroid-hc1-110:~$ apt policy linux-image-armmp-lpae > > > linux-image-armmp-lpae: > > > Installed: 6.1.129-1 > > > Candidate: 6.1.129-1 > > > Version table: > > > 6.12.20-1 80 > > > 80 http://ftp.de.debian.org/debian trixie/main armhf Packages > > > *** 6.1.129-1 500 > > > 500 http://ftp.de.debian.org/debian bookworm/main armhf Packages > > > 100 /var/lib/dpkg/status > > > 6.1.128-1 500 > > > 500 https://security.debian.org bookworm-security/main armhf > > > Packages > > > ansible@hn-odroid-hc1-110:~$ > > > > > > ## test 2 : current Linux kernel > > > ############################### > > > > > > ansible@hn-odroid-hc1-110:~$ uname -a > > > Linux hn-odroid-hc1-110 6.1.0-32-armmp-lpae #1 SMP Debian 6.1.129-1 > > > (2025-03-06) armv7l GNU/Linux > > > > > > ## test 3 : current Debian release > > > ################################### > > > > > > ansible@hn-odroid-hc1-110:~$ lsb_release -a > > > No LSB modules are available. > > > Distributor ID: Debian > > > Description: Debian GNU/Linux 12 (bookworm) > > > Release: 12 > > > Codename: bookworm > > > ansible@hn-odroid-hc1-110:~$ > > > > > > ## test 4 : current Debian release > > > ################################### > > > > > > ansible@hn-odroid-hc1-110:~$ cat /etc/debian_version > > > 12.10 > > > > > > > > > ## test 5 : boot command line > > > ################################### > > > > > > ansible@hn-odroid-hc1-110:~$ cat /proc/cmdline > > > UUID=b93d51ee-68ba-435b-b0a4-e36122aa0fd0 console=ttySAC2,115200n8 > > > console=ttySAC2,115200n8 log_buf_len=1M net.ifnames=0 fsck.mode=force > > > fsck.repair=yes ipv6.disable=1 loglevel=7 apparmor=0 selinux=0 > > > cgroup_no_v1=all > > > ansible@hn-odroid-hc1-110:~$ > > > > > > ## test 6 : target clean ? > > > ################################### > > > > > > ansible@hn-odroid-hc1-110:~$ dpkg -l |grep -v ii > > > Desired=Unknown/Install/Remove/Purge/Hold > > > | > > > Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend > > > |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) > > > ||/ Name Version Architecture Description > > > +++-===============================-====================================-============-================================================================================ > > > ansible@hn-odroid-hc1-110:~$ > > > > > > > > > ## test 7: USB devices > > > ###################### > > > > > > ansible@hn-odroid-hc1-110:~$ lsusb > > > Bus 006 Device 002: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 > > > Gigabit > > > Ethernet Adapter > > > Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > > > Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > Bus 004 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA > > > Technology Corp. JMS578 SATA 6Gb/s > > > Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > > > Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > > Bus 001 Device 003: ID 0cf3:9271 Qualcomm Atheros Communications AR9271 > > > 802.11n > > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > ansible@hn-odroid-hc1-110:~$ > > > > > > Usb dongle is one TP-LINK usb/Wifi dongle AC-600 with SMA external antenna > > > > > > ## test 8 : usb device wifi identification > > > ########################################### > > > > > > ansible@hn-odroid-hc1-110:~$ udevadm info -q all --path > > > /sys/class/net/wlan0 > > > P: /devices/platform/soc/12110000.usb/usb1/1-1/1-1:1.0/net/wlan0 > > > M: wlan0 > > > R: 0 > > > U: net > > > T: wlan > > > I: 156 > > > E: DEVPATH=/devices/platform/soc/12110000.usb/usb1/1-1/1-1:1.0/net/wlan0 > > > E: SUBSYSTEM=net > > > E: DEVTYPE=wlan > > > E: INTERFACE=wlan0 > > > E: IFINDEX=156 > > > E: USEC_INITIALIZED=52956786304 > > > E: ID_NET_NAMING_SCHEME=v252 > > > E: ID_NET_NAME_MAC=wlxf4f26d1428de > > > E: ID_OUI_FROM_DATABASE=TP-LINK TECHNOLOGIES CO.,LTD. > > > E: ID_BUS=usb > > > E: ID_MODEL=USB2.0_WLAN > > > E: ID_MODEL_ENC=USB2.0\x20WLAN > > > E: ID_MODEL_ID=9271 > > > E: ID_SERIAL=ATHEROS_USB2.0_WLAN_12345 > > > E: ID_SERIAL_SHORT=12345 > > > E: ID_VENDOR=ATHEROS > > > E: ID_VENDOR_ENC=ATHEROS > > > E: ID_VENDOR_ID=0cf3 > > > E: ID_REVISION=0108 > > > E: ID_TYPE=generic > > > E: ID_USB_MODEL=USB2.0_WLAN > > > E: ID_USB_MODEL_ENC=USB2.0\x20WLAN > > > E: ID_USB_MODEL_ID=9271 > > > E: ID_USB_SERIAL=ATHEROS_USB2.0_WLAN_12345 > > > E: ID_USB_SERIAL_SHORT=12345 > > > E: ID_USB_VENDOR=ATHEROS > > > E: ID_USB_VENDOR_ENC=ATHEROS > > > E: ID_USB_VENDOR_ID=0cf3 > > > E: ID_USB_REVISION=0108 > > > E: ID_USB_TYPE=generic > > > E: ID_USB_INTERFACES=:ff0000: > > > E: ID_USB_INTERFACE_NUM=00 > > > E: ID_USB_DRIVER=ath9k_htc > > > E: ID_USB_CLASS_FROM_DATABASE=Vendor Specific Class > > > E: ID_USB_SUBCLASS_FROM_DATABASE=Vendor Specific Subclass > > > E: ID_USB_PROTOCOL_FROM_DATABASE=Vendor Specific Protocol > > > E: ID_VENDOR_FROM_DATABASE=Qualcomm Atheros Communications > > > E: ID_MODEL_FROM_DATABASE=AR9271 802.11n > > > E: ID_PATH=platform-12110000.usb-usb-0:1:1.0 > > > E: ID_PATH_TAG=platform-12110000_usb-usb-0_1_1_0 > > > E: ID_NET_DRIVER=ath9k_htc > > > E: ID_NET_LINK_FILE=/usr/lib/systemd/network/73-usb-net-by-mac.link > > > E: ID_NET_NAME=wlan0 > > > > > > ## test 9: error when inserting USB dongle > > > ########################################### > > > > > > ansible@hn-odroid-hc1-110:~$ sudo dmesg |tail -30 > > > [10698.417934] EXT4-fs (dm-68): mounted filesystem with ordered data mode. > > > Quota mode: none. > > > [10698.438301] Not activating Mandatory Access Control as > > > /sbin/tomoyo-init > > > does not exist. > > > [10699.524558] EXT4-fs (dm-0): re-mounted. Quota mode: none. > > > [10700.715149] EXT4-fs (dm-13): re-mounted. Quota mode: none. > > > [43332.990553] hrtimer: interrupt took 11994500 ns > > > [52944.787058] usb 1-1: USB disconnect, device number 2 > > > [52944.956474] usb 1-1: ath9k_htc: USB layer deinitialized > > > [52952.478940] usb 1-1: new high-speed USB device number 3 using > > > exynos-ehci > > > [52952.660735] usb 1-1: New USB device found, idVendor=0cf3, > > > idProduct=9271, > > > bcdDevice= 1.08 > > > [52952.668178] usb 1-1: New USB device strings: Mfr=16, Product=32, > > > SerialNumber=48 > > > [52952.675023] usb 1-1: Product: USB2.0 WLAN > > > [52952.679002] usb 1-1: Manufacturer: ATHEROS > > > [52952.683658] usb 1-1: SerialNumber: 12345 > > > [52952.691500] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw > > > requested > > > [52952.708263] usb 1-1: firmware: failed to load > > > ath9k_htc/htc_9271-1.4.0.fw > > > (-2) > > > [52952.714500] usb 1-1: firmware: failed to load > > > ath9k_htc/htc_9271-1.4.0.fw > > > (-2) > > > [52952.721515] usb 1-1: Direct firmware load for > > > ath9k_htc/htc_9271-1.4.0.fw > > > failed with error -2 > > > [52952.730383] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested > > > [52952.742836] usb 1-1: firmware: direct-loading firmware htc_9271.fw > > > [52953.036988] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: > > > 50980 > > > [52953.277569] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 > > > credits > > > [52954.383459] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3 > > > [52954.387474] ath9k_htc 1-1:1.0: FW RMW support: Off > > > [52954.392260] ath: EEPROM regdomain: 0x809c > > > [52954.392280] ath: EEPROM indicates we should expect a country code > > > [52954.392292] ath: doing EEPROM country->regdmn map search > > > [52954.392301] ath: country maps to regdmn code: 0x52 > > > [52954.392311] ath: Country alpha2 being used: CN > > > [52954.392322] ath: Regpair used: 0x52 > > > [52954.400480] ieee80211 phy1: Atheros AR9271 Rev:1 > > > ansible@hn-odroid-hc1-110:~$ > > > > > > > > > Therefore, it is not possible to use this access point . > > > > > > I have also try to change behaviour by changing sources.list with new > > > (Trixie) package, in order to verify if firmware-atheros rom Trixie is OK > > > ? > > > > > > ...then ... > > > > > > ## test 10: use recent firmware-atheros (from Debian Trixie) > > > ############################################################# > > > > > > ansible@hn-odroid-hc1-110:~$ apt policy firmware-atheros > > > firmware-atheros: > > > Installed: 20230210-5 > > > Candidate: 20230210-5 > > > Version table: > > > 20241210-1 80 > > > 80 http://ftp.de.debian.org/debian trixie/non-free-firmware > > > armhf > > > Packages > > > *** 20230210-5 500 > > > 500 http://ftp.de.debian.org/debian bookworm/non-free-firmware > > > armhf > > > Packages > > > 100 /var/lib/dpkg/status > > > ansible@hn-odroid-hc1-110:~$ > > > > > > > > > ## test 11: force now installation of recent firmware (from Debian Trixie) > > > ############################################################# > > > > > > ansible@hn-odroid-hc1-110:~$ sudo apt remove --yes --purge > > > firmware-atheros > > > && sudo apt -t trixie install firmware-atheros > > > > > > Reading package lists... Done > > > Building dependency tree... Done > > > Reading state information... Done > > > The following packages will be REMOVED: > > > firmware-atheros* > > > 0 upgraded, 0 newly installed, 1 to remove and 1 not upgraded. > > > After this operation, 84.1 MB disk space will be freed. > > > Do you want to continue? [Y/n] ^C > > > ansible@hn-odroid-hc1-110:~$ sudo apt remove --yes --purge > > > firmware-atheros > > > && sudo apt -t trixie install firmware-atheros > > > Reading package lists... Done > > > Building dependency tree... Done > > > Reading state information... Done > > > The following packages will be REMOVED: > > > firmware-atheros* > > > 0 upgraded, 0 newly installed, 1 to remove and 1 not upgraded. > > > After this operation, 84.1 MB disk space will be freed. > > > (Reading database ... 34860 files and directories currently installed.) > > > Removing firmware-atheros (20241210-1) ... > > > dpkg: warning: while removing firmware-atheros, directory > > > '/usr/lib/firmware' not empty so not removed > > > Reading package lists... Done > > > Building dependency tree... Done > > > Reading state information... Done > > > The following NEW packages will be installed: > > > firmware-atheros > > > 0 upgraded, 1 newly installed, 0 to remove and 314 not upgraded. > > > Need to get 24.8 MB of archives. > > > After this operation, 84.1 MB of additional disk space will be used. > > > Get:1 http://ftp.de.debian.org/debian trixie/non-free-firmware armhf > > > firmware-atheros all 20241210-1 [24.8 MB] > > > Fetched 24.8 MB in 11s (2256 kB/s) > > > > > > Selecting previously unselected package firmware-atheros. > > > (Reading database ... 34540 files and directories currently installed.) > > > Preparing to unpack .../firmware-atheros_20241210-1_all.deb ... > > > Unpacking firmware-atheros (20241210-1) ... > > > Setting up firmware-atheros (20241210-1) ... > > > ansible@hn-odroid-hc1-110:~$ > > > > > > ## test 12: firmware-atheros installed on target > > > ################################################ > > > > > > ansible@hn-odroid-hc1-110:~$ apt policy firmware-atheros > > > firmware-atheros: > > > Installed: 20241210-1 > > > Candidate: 20241210-1 > > > Version table: > > > *** 20241210-1 100 > > > 80 http://ftp.de.debian.org/debian trixie/non-free-firmware > > > armhf > > > Packages > > > 100 /var/lib/dpkg/status > > > 20230210-5 500 > > > 500 http://ftp.de.debian.org/debian bookworm/non-free-firmware > > > armhf > > > Packages > > > > > > ## test 13 : unplug the USB, then plug device > > > ############################################### > > > > > > ansible@hn-odroid-hc1-110:~$ sudo dmesg |tail -30 > > > [52954.392292] ath: doing EEPROM country->regdmn map search > > > [52954.392301] ath: country maps to regdmn code: 0x52 > > > [52954.392311] ath: Country alpha2 being used: CN > > > [52954.392322] ath: Regpair used: 0x52 > > > [52954.400480] ieee80211 phy1: Atheros AR9271 Rev:1 > > > [58951.613764] usb 1-1: USB disconnect, device number 3 > > > [58951.734518] usb 1-1: ath9k_htc: USB layer deinitialized > > > [58975.649371] usb 1-1: new high-speed USB device number 4 using > > > exynos-ehci > > > [58975.835180] usb 1-1: New USB device found, idVendor=0cf3, > > > idProduct=9271, > > > bcdDevice= 1.08 > > > [58975.842042] usb 1-1: New USB device strings: Mfr=16, Product=32, > > > SerialNumber=48 > > > [58975.849589] usb 1-1: Product: USB2.0 WLAN > > > [58975.853377] usb 1-1: Manufacturer: ATHEROS > > > [58975.857425] usb 1-1: SerialNumber: 12345 > > > [58975.889210] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw > > > requested > > > [58975.896490] usb 1-1: firmware: failed to load > > > ath9k_htc/htc_9271-1.4.0.fw > > > (-2) > > > [58975.903080] usb 1-1: firmware: failed to load > > > ath9k_htc/htc_9271-1.4.0.fw > > > (-2) > > > [58975.909798] usb 1-1: Direct firmware load for > > > ath9k_htc/htc_9271-1.4.0.fw > > > failed with error -2 > > > [58975.918844] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested > > > [58975.924821] usb 1-1: firmware: direct-loading firmware htc_9271.fw > > > [58976.219541] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: > > > 50980 > > > [58976.460151] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 > > > credits > > > [58977.566339] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3 > > > [58977.570384] ath9k_htc 1-1:1.0: FW RMW support: Off > > > [58977.575338] ath: EEPROM regdomain: 0x809c > > > [58977.575361] ath: EEPROM indicates we should expect a country code > > > [58977.575373] ath: doing EEPROM country->regdmn map search > > > [58977.575382] ath: country maps to regdmn code: 0x52 > > > [58977.575393] ath: Country alpha2 being used: CN > > > [58977.575403] ath: Regpair used: 0x52 > > > [58977.583026] ieee80211 phy2: Atheros AR9271 Rev:1 > > > ansible@hn-odroid-hc1-110:~$ > > > > > > Issue is the same... > > > > > > ## test 14: use previous firmware-atheros (from Debian bullseye) > > > ################################################################ > > > > > > ansible@hn-odroid-hc1-110:~$ apt policy firmware-atheros > > > firmware-atheros: > > > Installed: 20241210-1 > > > Candidate: 20241210-1 > > > Version table: > > > *** 20241210-1 100 > > > 80 http://ftp.de.debian.org/debian trixie/non-free-firmware > > > armhf > > > Packages > > > 100 /var/lib/dpkg/status > > > 20230210-5 500 > > > 500 http://ftp.de.debian.org/debian bookworm/non-free-firmware > > > armhf > > > Packages > > > 20210315-3 90 > > > 90 http://ftp.de.debian.org/debian bullseye/non-free armhf > > > Packages > > > ansible@hn-odroid-hc1-110:~$ > > > > > > ## test 15: force now installation of old firmware (from Debian bullseye) > > > ############################################################# > > > > > > ansible@hn-odroid-hc1-110:~$ sudo apt remove --yes --purge > > > firmware-atheros > > > && sudo apt -t bullseye install firmware-atheros > > > > > > ansible@hn-odroid-hc1-110:~$ sudo apt remove --yes --purge > > > firmware-atheros > > > && sudo apt -t bullseye install firmware-atheros > > > Reading package lists... Done > > > Building dependency tree... Done > > > Reading state information... Done > > > The following packages will be REMOVED: > > > firmware-atheros* > > > 0 upgraded, 0 newly installed, 1 to remove and 1 not upgraded. > > > After this operation, 31.4 MB disk space will be freed. > > > (Reading database ... 34736 files and directories currently installed.) > > > Removing firmware-atheros (20210315-3) ... > > > Reading package lists... Done > > > Building dependency tree... Done > > > Reading state information... Done > > > The following NEW packages will be installed: > > > firmware-atheros > > > 0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded. > > > Need to get 10.0 MB of archives. > > > After this operation, 31.4 MB of additional disk space will be used. > > > Get:1 http://ftp.de.debian.org/debian bullseye/non-free armhf > > > firmware-atheros all 20210315-3 [10.0 MB] > > > Fetched 10.0 MB in 4s (2285 kB/s) > > > Selecting previously unselected package firmware-atheros. > > > (Reading database ... 34540 files and directories currently installed.) > > > Preparing to unpack .../firmware-atheros_20210315-3_all.deb ... > > > Unpacking firmware-atheros (20210315-3) ... > > > Setting up firmware-atheros (20210315-3) ... > > > ansible@hn-odroid-hc1-110:~$ > > > > > > ## test 16: firmware-atheros installed on target > > > ################################################ > > > > > > ansible@hn-odroid-hc1-110:~$ apt policy firmware-atheros > > > Installed: 20210315-3 > > > Candidate: 20230210-5 > > > Version table: > > > 20241210-1 80 > > > 80 http://ftp.de.debian.org/debian trixie/non-free-firmware > > > armhf > > > Packages > > > 20230210-5 500 > > > 500 http://ftp.de.debian.org/debian bookworm/non-free-firmware > > > armhf > > > Packages > > > *** 20210315-3 100 > > > 90 http://ftp.de.debian.org/debian bullseye/non-free armhf > > > Packages > > > 100 /var/lib/dpkg/status > > > > > > ## test 17 : unplug the USB, then plug device > > > ############################################### > > > > > > ansible@hn-odroid-hc1-110:~$ sudo dmesg |tail -30 > > > [58977.566339] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3 > > > [58977.570384] ath9k_htc 1-1:1.0: FW RMW support: Off > > > [58977.575338] ath: EEPROM regdomain: 0x809c > > > [58977.575361] ath: EEPROM indicates we should expect a country code > > > [58977.575373] ath: doing EEPROM country->regdmn map search > > > [58977.575382] ath: country maps to regdmn code: 0x52 > > > [58977.575393] ath: Country alpha2 being used: CN > > > [58977.575403] ath: Regpair used: 0x52 > > > [58977.583026] ieee80211 phy2: Atheros AR9271 Rev:1 > > > [60456.074301] usb 1-1: USB disconnect, device number 4 > > > [60456.180820] usb 1-1: ath9k_htc: USB layer deinitialized > > > [60461.522948] usb 1-1: new high-speed USB device number 5 using > > > exynos-ehci > > > [60461.704602] usb 1-1: New USB device found, idVendor=0cf3, > > > idProduct=9271, > > > bcdDevice= 1.08 > > > [60461.711503] usb 1-1: New USB device strings: Mfr=16, Product=32, > > > SerialNumber=48 > > > [60461.719708] usb 1-1: Product: USB2.0 WLAN > > > [60461.722793] usb 1-1: Manufacturer: ATHEROS > > > [60461.726855] usb 1-1: SerialNumber: 12345 > > > [60461.732751] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw > > > requested > > > [60461.740099] usb 1-1: firmware: direct-loading firmware > > > ath9k_htc/htc_9271-1.4.0.fw > > > [60462.035874] usb 1-1: ath9k_htc: Transferred FW: > > > ath9k_htc/htc_9271-1.4.0.fw, size: 51008 > > > [60462.288026] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 > > > credits > > > [60462.545586] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.4 > > > [60462.549639] ath9k_htc 1-1:1.0: FW RMW support: On > > > [60462.554343] ath: EEPROM regdomain: 0x809c > > > [60462.554357] ath: EEPROM indicates we should expect a country code > > > [60462.554368] ath: doing EEPROM country->regdmn map search > > > [60462.554376] ath: country maps to regdmn code: 0x52 > > > [60462.554387] ath: Country alpha2 being used: CN > > > [60462.554397] ath: Regpair used: 0x52 > > > [60462.561841] ieee80211 phy3: Atheros AR9271 Rev:1 > > > ansible@hn-odroid-hc1-110:~$ > > > > > > > > > ## test 18 : verify net device > > > ################################ > > > > > > ansible@hn-odroid-hc1-110:~$ sudo iwconfig wlan0 > > > wlan0 IEEE 802.11 ESSID:off/any > > > Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm > > > Retry short limit:7 RTS thr:off Fragment thr:off > > > Encryption key:off > > > Power Management:off > > > > > > > > > Conclusions: > > > It seems there is one issue on this package > > > Thanks in advance for you help > > > > ath9k_htc/htc_9271-1.4.0.fw is actually provided by the > > firmware-ath9k-htc . Can you verify if this fixes your issue? > > > > Regards, > > Salvatore > > ## test 19 : remove previous fimware and install new one ... > ############################################################ > ansible@hn-odroid-hc1-110:~$ dpkg -l |grep firmware > ii firmware-ath9k-htc 1.4.0-108-gd856466+dfsg1-1.3+deb12u1 all > firmware for AR7010 and AR9271 USB wireless adapters > ii firmware-linux-free 20200122-1 all Binary firmware > for various drivers in the Linux kernel > ansible@hn-odroid-hc1-110:~$ > > ## test 20 : unplug the USB, then plug device > ############################################### > > [197709.118219] usb 1-1: new high-speed USB device number 7 using > exynos-ehci > [197709.299867] usb 1-1: New USB device found, idVendor=0cf3, > idProduct=9271, bcdDevice= 1.08 > [197709.307310] usb 1-1: New USB device strings: Mfr=16, Product=32, > SerialNumber=48 > [197709.314838] usb 1-1: Product: USB2.0 WLAN > [197709.318305] usb 1-1: Manufacturer: ATHEROS > [197709.322446] usb 1-1: SerialNumber: 12345 > [197709.348578] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw > requested > [197709.364961] usb 1-1: firmware: direct-loading firmware > ath9k_htc/htc_9271-1.4.0.fw > [197709.660666] usb 1-1: ath9k_htc: Transferred FW: > ath9k_htc/htc_9271-1.4.0.fw, size: 51008 > [197709.909652] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 > credits > [197710.192340] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.4 > [197710.196457] ath9k_htc 1-1:1.0: FW RMW support: On > [197710.201682] ath: EEPROM regdomain: 0x809c > [197710.201698] ath: EEPROM indicates we should expect a country code > [197710.201709] ath: doing EEPROM country->regdmn map search > [197710.201747] ath: country maps to regdmn code: 0x52 > [197710.201758] ath: Country alpha2 being used: CN > [197710.201768] ath: Regpair used: 0x52 > [197710.207439] ieee80211 phy5: Atheros AR9271 Rev:1 > [197710.241489] ath9k_htc 1-1:1.0 if-ap0: renamed from wlan0 > > ansible@hn-odroid-hc1-110:~$ sudo iwconfig if-ap0 > if-ap0 IEEE 802.11 ESSID:off/any > Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm > Retry short limit:7 RTS thr:off Fragment thr:off > Encryption key:off > Power Management:off > > > It works, thank you very much for your quick response Perfect, thanks for reporting back. In this case I believe we are settled. Regards, Salvatore
