Control: tags -1 moreinfo
On Mon, Mar 31, 2025 at 03:27:53PM +0200, Serge S. Bartosh wrote:
> Device: P410 controller used in HP DL320 G6 server.
This hardware is over 15 years old.
> BIOS: W07 (latest)
According to the HP web page, the latest firmware is 2018.05.21, yours
is from 2015.
> Kernel taint flags: TAINT_FIRMWARE_WORKAROUND
The firmware was already a problem at this time.
> [ 6.730629] DMAR: DRHD: handling fault status reg 2
> [ 6.730699] DMAR: [DMA Read NO_PASID] Request device [00:1e.0] fault addr
> 0xe763e000 [fault reason 0x06] PTE Read access is not set
> [ 6.730706] NMI: PCI system error (SERR) for reason b1 on CPU 0.
> [ 6.730711] Dazed and confused, but trying to continue
> [ 16.730651] DMAR: DRHD: handling fault status reg 102
> [ 16.730659] DMAR: [DMA Read NO_PASID] Request device [00:1e.0] fault addr
> 0xe763e000 [fault reason 0x06] PTE Read access is not set
> [ 26.730661] DMAR: DRHD: handling fault status reg 202
> [ 26.730671] DMAR: [DMA Read NO_PASID] Request device [00:1e.0] fault addr
> 0xe763e000 [fault reason 0x06] PTE Read access is not set
> [ 36.730693] DMAR: DRHD: handling fault status reg 302
> [ 36.730705] DMAR: [DMA Read NO_PASID] Request device [00:1e.0] fault addr
> 0xe763e000 [fault reason 0x06] PTE Read access is not set
I would assume this have something to do with this problem. Try
"intel_iommu=off".
Bastian
--
There is a multi-legged creature crawling on your shoulder.
-- Spock, "A Taste of Armageddon", stardate 3193.9
