--- Begin Message ---
Package: src:linux
Version: 4.19.118-2
Severity: normal
Dear Maintainer,
I encounter an issue with USB3 hub and USB3 key and disk
* What led up to the situation?
The problem occur since i udgraded my computer from debian 9 to debian 10
(from librazik2 to librazik3 in fact, but i don't think it's relevant
irrelevant).
* What exactly did you do (or not do) that was effective (or ineffective)?
- I tried to start my computer with diffferent kernel :
- 4.19.0-9 => problem is present.
- 5.4.0-0 => problem is present.
- 4.9.0-9 => no problem.
- I tried to identify what configuration produce the bug:
- Connecting a USB3 device in the USB3 hub => the USB3 device is not
detected, it doesn't appear when doing "lsusb"
- Connecting a USB3 device in the USB3 hub and then connecting the hub to
the computer => work normally
- Connecting a USB3 device directly in USB3 port => the device is detected
and preivously USB3 device connected to the hub are detected a same time
- Connecting a USB2 device directly in USB3 port => the device is
detected, but it doesn't trigger detection of USB3 device connected to the hub
- I also did some other test with usb2 device and usb2 computer port, it
works until some point i didn't yet identified.
-- Package-specific info:
** Version:
Linux version 4.19.0-9-amd64 (debian-kernel@lists.debian.org) (gcc version
8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.118-2 (2020-04-29)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.19.0-9-amd64 root=/dev/mapper/HP--Amaury--vg0-root
ro threadirqs quiet
** Not tainted
** Kernel log:
[ 6.472246] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.480158] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 6.480754] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.480936] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.511144] intel_rapl: Found RAPL domain package
[ 6.511147] intel_rapl: Found RAPL domain core
[ 6.511148] intel_rapl: Found RAPL domain uncore
[ 6.511156] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 6.649762] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
(null)
[ 6.720060] audit: type=1400 audit(1591291208.238:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
pid=525 comm="apparmor_parser"
[ 6.726098] audit: type=1400 audit(1591291208.242:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=527
comm="apparmor_parser"
[ 6.726105] audit: type=1400 audit(1591291208.242:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=527
comm="apparmor_parser"
[ 6.726109] audit: type=1400 audit(1591291208.242:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=527
comm="apparmor_parser"
[ 6.728496] audit: type=1400 audit(1591291208.246:6): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=524
comm="apparmor_parser"
[ 6.728502] audit: type=1400 audit(1591291208.246:7): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium"
pid=524 comm="apparmor_parser"
[ 6.732029] audit: type=1400 audit(1591291208.250:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-oopslash"
pid=531 comm="apparmor_parser"
[ 6.734048] audit: type=1400 audit(1591291208.250:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=529
comm="apparmor_parser"
[ 6.734054] audit: type=1400 audit(1591291208.250:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=529 comm="apparmor_parser"
[ 6.741411] audit: type=1400 audit(1591291208.258:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed"
pid=533 comm="apparmor_parser"
[ 7.294963] random: crng init done
[ 7.294966] random: 3 urandom warning(s) missed due to ratelimiting
[ 7.738051] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 7.742363] r8169 0000:08:00.0: firmware: direct-loading firmware
rtl_nic/rtl8105e-1.fw
[ 7.742916] Generic PHY r8169-800:00: attached PHY driver [Generic PHY]
(mii_bus:phy_addr=r8169-800:00, irq=IGNORE)
[ 8.021213] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 8.027980] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 8.028068] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading
firmware file 'rt3290.bin'
[ 8.031784] rt2800pci 0000:07:00.0: firmware: direct-loading firmware
rt3290.bin
[ 8.031793] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware
detected - version: 0.37
[ 8.169685] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 8.315402] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 8.419330] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 9.256887] fuse init (API version 7.27)
[ 26.731549] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 27.832810] wlo1: authenticate with 00:78:9e:79:9e:a0
[ 27.837789] wlo1: send auth to 00:78:9e:79:9e:a0 (try 1/3)
[ 27.839268] wlo1: authenticated
[ 27.843303] wlo1: associate with 00:78:9e:79:9e:a0 (try 1/3)
[ 27.846923] wlo1: RX AssocResp from 00:78:9e:79:9e:a0 (capab=0xc11 status=0
aid=1)
[ 27.847017] wlo1: associated
[ 28.860032] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 203.327151] usb 3-1: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[ 203.354577] usb 3-1: New USB device found, idVendor=0bc2, idProduct=2312,
bcdDevice= 6.36
[ 203.354580] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 203.354581] usb 3-1: Product: Expansion
[ 203.354582] usb 3-1: Manufacturer: Seagate
[ 203.354583] usb 3-1: SerialNumber: NA47F3RZ
[ 203.368273] scsi host7: uas
[ 203.369538] scsi 7:0:0:0: Direct-Access Seagate Expansion 0636
PQ: 0 ANSI: 6
[ 203.371085] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 203.373153] sd 7:0:0:0: [sdc] Spinning up disk...
[ 208.595072] .ready
[ 208.596109] sd 7:0:0:0: [sdc] 1953525167 512-byte logical blocks: (1.00
TB/932 GiB)
[ 208.596523] sd 7:0:0:0: [sdc] Write Protect is off
[ 208.596525] sd 7:0:0:0: [sdc] Mode Sense: 2b 00 10 08
[ 208.597362] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
supports DPO and FUA
[ 208.624076] sdc: sdc1
[ 208.626849] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 241.894886] usb 3-1: USB disconnect, device number 4
[ 241.895581] sd 7:0:0:0: [sdc] Synchronizing SCSI cache
[ 242.146854] sd 7:0:0:0: [sdc] Synchronize Cache(10) failed: Result:
hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 243.320684] usb 3-2.1: USB disconnect, device number 3
[ 249.298872] usb 3-1: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd
[ 249.322188] usb 3-1: New USB device found, idVendor=0bc2, idProduct=2312,
bcdDevice= 6.36
[ 249.322191] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 249.322192] usb 3-1: Product: Expansion
[ 249.322194] usb 3-1: Manufacturer: Seagate
[ 249.322195] usb 3-1: SerialNumber: NA47F3RZ
[ 249.335755] scsi host6: uas
[ 249.337039] scsi 6:0:0:0: Direct-Access Seagate Expansion 0636
PQ: 0 ANSI: 6
[ 249.338602] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 249.340711] sd 6:0:0:0: [sdb] Spinning up disk...
[ 249.543005] usb 3-2.1: new SuperSpeed Gen 1 USB device number 6 using
xhci_hcd
[ 249.564127] usb 3-2.1: New USB device found, idVendor=0781, idProduct=5583,
bcdDevice= 1.00
[ 249.564130] usb 3-2.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 249.564132] usb 3-2.1: Product: Ultra Fit
[ 249.564134] usb 3-2.1: Manufacturer: SanDisk
[ 249.564135] usb 3-2.1: SerialNumber: 4C530000180724116341
[ 249.564756] usb-storage 3-2.1:1.0: USB Mass Storage device detected
[ 249.565006] scsi host7: usb-storage 3-2.1:1.0
[ 250.579516] scsi 7:0:0:0: Direct-Access SanDisk Ultra Fit 1.00
PQ: 0 ANSI: 6
[ 250.579839] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 250.579991] sd 7:0:0:0: [sdc] 30031872 512-byte logical blocks: (15.4
GB/14.3 GiB)
[ 250.580722] sd 7:0:0:0: [sdc] Write Protect is off
[ 250.580725] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 250.580958] sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 250.595103] sdc: sdc1
[ 250.596673] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 250.816053] FAT-fs (sdc1): Volume was not properly unmounted. Some data may
be corrupt. Please run fsck.
[ 254.706831] .ready
[ 254.707656] sd 6:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00
TB/932 GiB)
[ 254.708041] sd 6:0:0:0: [sdb] Write Protect is off
[ 254.708043] sd 6:0:0:0: [sdb] Mode Sense: 2b 00 10 08
[ 254.708838] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
supports DPO and FUA
[ 254.741021] sdb: sdb1
[ 254.743628] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 262.854836] usb 3-1: USB disconnect, device number 5
[ 262.855557] sd 6:0:0:0: [sdb] Synchronizing SCSI cache
[ 263.094855] sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result:
hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 263.336426] usb 3-2.1: USB disconnect, device number 6
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Pavilion Sleekbook 15 PC
product_version: 087E1000003B5900000320100
chassis_vendor: Hewlett-Packard
chassis_version: Chassis Version
bios_vendor: Insyde
bios_version: F.18
board_vendor: Hewlett-Packard
board_name: 18FD
board_version: 82.27
** Loaded modules:
ctr
ccm
fuse
snd_seq_midi
snd_seq_midi_event
snd_hrtimer
snd_seq
cpufreq_powersave
cpufreq_userspace
cpufreq_conservative
binfmt_misc
nls_ascii
nls_cp437
vfat
fat
intel_rapl
snd_hda_codec_hdmi
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
arc4
snd_hda_codec_idt
rt2800pci
rt2800mmio
rt2800lib
rt2x00pci
rt2x00mmio
rt2x00lib
snd_hda_codec_generic
irqbypass
mac80211
crct10dif_pclmul
snd_usb_audio
crc32_pclmul
uvcvideo
videobuf2_vmalloc
snd_usbmidi_lib
videobuf2_memops
videobuf2_v4l2
snd_rawmidi
videobuf2_common
snd_seq_device
snd_hda_intel
ghash_clmulni_intel
videodev
intel_cstate
snd_hda_codec
intel_uncore
media
efi_pstore
cfg80211
snd_hda_core
hp_wmi
intel_rapl_perf
efivars
wmi_bmof
joydev
serio_raw
snd_hwdep
sparse_keymap
snd_pcm
sg
eeprom_93cx6
snd_timer
rtsx_pci_ms
iTCO_wdt
crc_ccitt
snd
iTCO_vendor_support
rfkill
memstick
mei_me
soundcore
mei
battery
pcc_cpufreq
hp_accel
lis3lv02d
input_polldev
hp_wireless
evdev
ac
parport_pc
ppdev
lp
parport
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
fscrypto
ecb
crypto_simd
cryptd
glue_helper
aes_x86_64
btrfs
xor
zstd_decompress
zstd_compress
xxhash
raid6_pq
libcrc32c
crc32c_generic
dm_mod
uas
usb_storage
sd_mod
hid_generic
usbhid
hid
i915
rtsx_pci_sdmmc
mmc_core
xhci_pci
ahci
xhci_hcd
libahci
libata
ehci_pci
i2c_algo_bit
ehci_hcd
drm_kms_helper
crc32c_intel
psmouse
scsi_mod
usbcore
drm
r8169
lpc_ich
realtek
rtsx_pci
libphy
i2c_i801
mfd_core
thermal
usb_common
video
wmi
button
** Network interface configuration:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state
DOWN group default qlen 1000
link/ether 84:34:97:6e:86:ac brd ff:ff:ff:ff:ff:ff
3: wlo1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether 68:94:23:73:81:ab brd ff:ff:ff:ff:ff:ff
inet 192.168.1.150/24 brd 192.168.1.255 scope global dynamic noprefixroute
wlo1
valid_lft 85484sec preferred_lft 85484sec
inet6 2001:861:3383:aef0:3133:ad30:6c67:899f/64 scope global dynamic
noprefixroute
valid_lft 86016sec preferred_lft 14016sec
inet6 fe80::160:904d:4e5c:21d0/64 scope link noprefixroute
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
wlo1: 625464 907 0 0 0 0 0 0 141343
1077 0 0 0 0 0 0
eno1: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
lo: 8180 108 0 0 0 0 0 0 8180
108 0 0 0 0 0 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM
Controller [8086:0154] (rev 09)
Subsystem: Hewlett-Packard Company 3rd Gen Core processor DRAM
Controller [103c:18fd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 72000000-72ffffff
Prefetchable memory behind bridge: 0000000040000000-000000005fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company 3rd Gen Core processor Graphics
Controller [103c:18fd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 73000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at 60000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 5000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company 7 Series/C210 Series Chipset Family
USB xHCI Host Controller [103c:18fd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at 73600000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C216
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family MEI
Controller [103c:18fd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at 73614000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family
USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family USB
Enhanced Host Controller [103c:18fd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 73619000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C216 Chipset Family
High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family High
Definition Audio Controller [103c:18fd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at 73610000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C216 Chipset Family PCI
Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Memory behind bridge: 73500000-735fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 16
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 73400000-734fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=09, subordinate=0e, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 71000000-71ffffff
Prefetchable memory behind bridge: 0000000070000000-0000000070ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family
USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family USB
Enhanced Host Controller [103c:18fd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 73618000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC
Controller [8086:1e57] (rev 04)
Subsystem: Hewlett-Packard Company HM77 Express Chipset LPC Controller
[103c:18fd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 Mobile SATA
Controller [RAID mode] [8086:282a] (rev 04)
Subsystem: Hewlett-Packard Company 82801 Mobile SATA Controller [RAID
mode] [103c:18fd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 26
Region 0: I/O ports at 5088 [size=8]
Region 1: I/O ports at 5094 [size=4]
Region 2: I/O ports at 5080 [size=8]
Region 3: I/O ports at 5090 [size=4]
Region 4: I/O ports at 5060 [size=32]
Region 5: Memory at 73617000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C216 Chipset Family SMBus
Controller [8086:1e22] (rev 04)
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family SMBus
Controller [103c:18fd]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at 73615000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 5040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 3D controller [0302]: NVIDIA Corporation GF117M [GeForce
610M/710M/810M/820M / GT 620M/625M/630M/720M] [10de:1140] (rev a1)
Subsystem: Hewlett-Packard Company GeForce GT 630M [103c:18fd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 72000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 40000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at 50000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 4000 [disabled] [size=128]
Expansion ROM at 52000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel modules: nouveau
07:00.0 Network controller [0280]: Ralink corp. RT3290 Wireless 802.11n 1T/1R
PCIe [1814:3290]
Subsystem: Hewlett-Packard Company Ralink RT3290LE 802.11bgn 1x1 Wi-Fi
and Bluetooth 4.0 Combo Adapter [103c:18ec]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 73510000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2800pci
Kernel modules: rt2800pci
07:00.1 Bluetooth [0d11]: Ralink corp. RT3290 Bluetooth [1814:3298]
Subsystem: Hewlett-Packard Company Ralink RT3290LE 802.11bgn 1x1 Wi-Fi
and Bluetooth 4.0 Combo Adapter [103c:18ec]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 73500000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 05)
Subsystem: Hewlett-Packard Company RTL810xE PCI Express Fast Ethernet
controller [103c:18fd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at 73404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at 73400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI
Express Card Reader [10ec:5229] (rev 01)
Subsystem: Hewlett-Packard Company RTS5229 PCI Express Card Reader
[103c:18fd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at 71000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 13b2:0008 Alesis
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 05e3:0626 Genesys Logic, Inc.
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 04f2:b35f Chicony Electronics Co., Ltd
Bus 002 Device 004: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 10.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'oldstable-updates'), (500,
'stable'), (500, 'oldstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386, i686
Kernel: Linux 4.19.0-9-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8),
LANGUAGE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-4.19.0-9-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.133+deb10u1
ii kmod 26-1
ii linux-base 4.6
Versions of packages linux-image-4.19.0-9-amd64 recommends:
ii apparmor 2.13.2-10
ii firmware-linux-free 3.4
Versions of packages linux-image-4.19.0-9-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.02+dfsg1-20
pn linux-doc-4.19 <none>
Versions of packages linux-image-4.19.0-9-amd64 is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20190114-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20190114-2
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
--- End Message ---
